Model: ESP-C3-01M
A development board based on an ESP32-C3 from Ai-Thinker. With the built-in Wi-Fi and BLE, this board is ideal for IoT applications. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with w..
€6.00
Ex Tax:€4.96
Model: ESP-C3-32S-KIT
A development board based on an ESP32-C3 from Ai-Thinker. With built-in Wi-Fi and BLE, this board is ideal for IoT applications. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which..
€6.00
Ex Tax:€4.96
Model: ESP32A1S-AUDIODEVBOARD
An audio development board based on an ESP32-A1S from Ai-Thinker. The ESP32-A1S is an ESP32 based module containing an audio CODEC with built-in DACs and ADCs, making this development board very well suited for audio projects. Ideal for adding Wi-Fi ..
€17.50
Ex Tax:€14.46
Model: NODEMCU-ESP-12S
This board is a version of the NodeMCU board with an improved ESP-12S module (instead of ESP-12F/E). The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included).
Specifications:
Supply v..
€7.50
Ex Tax:€6.20
Model: ABX00063
The Arduino GIGA R1 Wi-Fi is a much faster and more powerful microcontroller from Arduino, with the same form factor as the MEGA and DUE. In addition, the GIGA has a whopping 76 GPIO pins and has Wi-Fi and Bluetooth 5.1 support.
Note: The GIGA R1 ..
€82.00
Ex Tax:€67.77
Model: ABX00042
The Arduino Portenta H7 is equipped with two processors that can perform parallel tasks. For example, this allows you to run Arduino on one core and MicroPython on the other and let them communicate with each other.
The board can be programmed with ..
€98.00
Ex Tax:€80.99
Model: BTT-ESP07S
This ESP module can be directly connected to most BigTreeTech boards, such as the SKR 2 and the OCTOPUS V1.1 boards. You can use the Wi-Fi module with ESP3D if you are using Marlin, or via Duet Web Control (DWC) if you are using RepRap Firmware.
S..
€8.00
Ex Tax:€6.61
Model: D1MINI
This D1 mini is basically a handy breakout board of the ESP-12F module. The CH340 USB to serial converter makes it easy to program, even as an Arduino.
The board has a micro USB connection with which it can be programmed and/or fed. (micro USB cable..
€6.00
Ex Tax:€4.96
Model: ESP32CP2102V1
This development board is an ESP32 based board with WiFi and Bluetooth.
The CP2102 USB to serial converter makes it easy to program, even as an Arduino.
The board has a micro USB connection with which it can be programmed and/or powered.(Micro USB ..
€9.50
Ex Tax:€7.85
Model: ESP32CP2102OLED
This development board is an ESP32 based board with WiFi and Bluetooth and a white 0.96 inch OLED display. The CP2102 USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection by which it can be p..
€14.00
Ex Tax:€11.57
Model: ESP32CP2104HEADERS
This development board is an ESP32 based board with WiFi and Bluetooth.
The USB to serial converter makes it easy to program, even as an Arduino.
The board has a micro USB connection by which it can be programmed and/or powered. (micro USB cable no..
€9.00
Ex Tax:€7.44
Model: ESP32CAM
This development board is an ESP32 based board with WiFi and Bluetooth and has a built-in camera. In addition, the board also has a micro SD card connection.
Specifications:
ESP32 chip with 240Mhz dual core processor
Flash memory: 4MB
Wo..
€11.00
Ex Tax:€9.09
Model: ESP32DEVBOARDLI
This development board is based on the ESP32 and is easy to program, also as an Arduino. The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included).
See the ESP32-D0WNQ6 datasheet under the t..
€5.50
Ex Tax:€4.55
Model: ESP32-D0WDQ6-DEVBOARD
This development board is based on the ESP32-D0WDQ6 and is easy to program, also as an Arduino. The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included).
Specifications:
Supply voltag..
€7.00
Ex Tax:€5.79
Model: NODEMCUCP2102
The NodeMCU board can work on its own with Lua scripts. This board is a version of the nodemcu board with a CP2102 usb to serial converter instead of the CH340 chip and improved ESP-12E module. (instead of ESP-12)
More about the board can be read h..
€8.50
Ex Tax:€7.02
Model: ESP8266-01-1M
This module offers you the possibility to connect your Arduino to WiFi for a very low price.
The ESP8266 module works with the normal UART port on your Arduino and can connect to networks, form your own network (hot spot) or both. The possibilitie..
€4.00
Ex Tax:€3.31
Model: ESP-01S
This module offers you the possibility to connect your Arduino to WiFi for a very low price. This "S" version of the ESP-01 module has minor improvements in the PCB compared to the normal ESP-01 module.
The ESP8266 module works with the normal UAR..
€4.00
Ex Tax:€3.31
Model: ESP-12BATTERY
The board can work on its own with Lua scripts, but you still need a USB to Serial adapter.
This board has the ESP-12 module with 4MB flash memory. You can put 3x AA batteries in the battery holder to let the module run completely independently.
In..
€8.00
Ex Tax:€6.61
Model: LILYGO-K113-01-Q309
The LilyGO LILY Pi is based on the ESP32 and has the form factor of a Raspberry Pi. This LILY Pi comes with a display with touchscreen and a built-in relay. It is easy to program via the Arduino IDE. The USB ports do not support the USB protocol but ..
€38.50
Ex Tax:€31.82
Model: LILYGO-H501
This T-Display from LilyGO is a microcontroller based on an ESP32 with a built-in 1.02 inch E-paper E-ink display and an enclosure.
Note: This board does not have a built-in USB to serial converter, to program the board the following converte..
€22.50
Ex Tax:€18.60
Model: LILYGO-H487
The LilyGO Open-Smartwatch is a smartwatch, designed by pauls_3d_things, based on a T-Micro32 module. The smartwatch has a 1.3 inch display, RTC module, accelerometer and more. The built-in USB to serial converter makes it easy to program via the mic..
€28.50
Ex Tax:€23.55
Model: LILYGO-H487-A
The LilyGO Open-Smartwatch is a smartwatch, designed by pauls_3d_things, based on a T-Micro32 module. The smartwatch has a 1.3 inch display, RTC module, accelerometer and more. The built-in USB to serial converter makes it easy to program via the mic..
€34.50
Ex Tax:€28.51
Model: LILYGO-H534
The T01-C3 is a successor to the popular ESP-01 Wi-Fi module. This module is based on the ESP32-C3 microcontroller (instead of the ESP8266 like the ESP-01 module), as such this module also has Bluetooth low energy (BLE) in addition to Wi-Fi..
€5.00
Ex Tax:€4.13
Model: LILYGO-H495
The T-Display from LilyGO is a microcontroller based on an ESP32 with a built-in 1.02 inch E-paper E-ink display.
Note: This board does not have a built-in USB to serial converter, to program the board the following converter is required: TTGO T-U..
€14.00
Ex Tax:€11.57
Model: LILYGO-H557
This T-Dongle module from LilyGO is a microcontroller based on an ESP32-S2 chip. This board has two USB connections, a type-A male and a type-A female. As a result, the module can not only be used as a (virtual) USB device (such as a keyboard), but a..
€13.50
Ex Tax:€11.16
Model: LILYGO-K201
LilyGO's T-Embed is a microcontroller board with a lot of features, such as an IPS display, rotary encoder, speaker and more. This version has a white front and comes without a case on the back...
€31.50
Ex Tax:€26.03
Model: LILYGO-H556-Q356
The LilyGO T-Keyboard is a very compact wireless Bluetooth and Wi-Fi keyboard with a built-in display. Software for a Bluetooth keyboard is pre-installed so that it can be used directly as a wireless keyboard for, for example, a PC or smartphone...
€22.00
Ex Tax:€18.18
Model: LILYGO-H553
The T-PicoC3 from LilyGO is a microcontroller that uses both the ESP32-C3 and the RP2040 chip with also a built-in 1.14 inch TFT display. Thanks to the built-in USB to serial converters, both microcontrollers are easy to program, even as Arduinos. Th..
€12.50
Ex Tax:€10.33
Model: LILYGO-H579
A very small microcontroller with built-in display from LilyGO. It is easy to program, also like an Arduino. Compared to the normal T-QT, this board has extra PSRAM, but less flash memory. In addition, this new version also has a Li-ion charging..
€12.50
Ex Tax:€10.33
Model: LILYGO-H561
The T-Relay-8 is a handy relay module with Wi-Fi and Bluetooth. This module has 8 relays and an ESP32-Wrover.
Note: This board does not have a built-in USB to serial converter, to program the board the following converter is needed: TTGO T-U2T..
€21.50
Ex Tax:€17.77
Model: LILYGO-H583
A microcontroller with circular touchscreen display from LilyGO. It is easy to program, also like an Arduino.
Note: The display is not yet taped to the rest of the module. Carefully remove the module from its packaging by pulling the clear tab.
..
€34.00
Ex Tax:€28.10
Model: LILYGO-H574
LilyGO's TTGO T-SIMCAM is a microcontroller with camera. The board has a USB-C connector that allows it to be programmed and/or powered (USB-C cable not included). The board also has a handy PCIe slot for which various expansion modules are available..
€15.00
Ex Tax:€12.40
Model: LILYGO-G612-Q175
The LilyGO TTGO LoRa32 is an ESP32 based microcontroller board with a built-in SX1276 LoRa chip and a 0.96 inch OLED display. The board is easily programmable through the USB to serial convertor and can also be used as an Arduino. The board has a mic..
€18.50
Ex Tax:€15.29
Model: LILYGO-H257
This TTGO T-Base is microcontroller based on a ESP8266 with the same pin layout as a D1 Mini. The CH340 USB to serial converter makes it easy to program, even as an Arduino. The board has a Micro USB connection with which it can be programmed and/or ..
€6.50
Ex Tax:€5.37
Model: LILYGO-H267-Q217
The TTGO T-Beam from LilyGO is a microcontroller based on an ESP32, including a built-in LoRa chip and a GPS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be p..
€39.50
Ex Tax:€32.64
Model: LILYGO-H242-Q159
The TTGO T-Beam from LilyGO is a microcontroller based on an ESP32 including a built-in SX1276 LoRa chip and a NEO-6M GPS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with whic..
€32.50
Ex Tax:€26.86
Model: LILYGO-H261-Q106
The TTGO T-Beam from LilyGO is a microcontroller based on an ESP32 including a built-in SX1276 LoRa chip and a NEO-M8N GPS module. The CP2104 USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection w..
€39.00
Ex Tax:€32.23
Model: LILYGO-H447-Q218
The TTGO T-Call from LilyGO is a microcontroller based on an ESP32 in combination with an SIM800C GSM GPRS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a USB-C connection with which it can be program..
€21.00
Ex Tax:€17.36
Model: LILYGO-H428-Q166
The TTGO T-Call from LilyGO is a microcontroller based on an ESP32 in combination with an SIM800L GSM GPRS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a USB-C connection with which it can be program..
€19.50
Ex Tax:€16.12
Model: LILYGO-H317-Q103
The TTGO T-Call from LilyGO is a microcontroller based on an ESP32 in combination with an SIM800L GSM GPRS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a USB-C connection with which it can be program..
€18.50
Ex Tax:€15.29
Model: LILYGO-H295
The TTGO Camera from LilyGO is a microcontroller based on an ESP32 with a built-in camera, a PIR sensor and a 0.96 inch OLED display. The CP2104 USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connectio..
€19.50
Ex Tax:€16.12
Model: LILYGO-H296-Q285
The TTGO Camera from LilyGO is a microcontroller based on an ESP32 with a built-in fisheye camera, a PIR sensor and a 0.96 inch OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB con..
€19.50
Ex Tax:€16.12
Model: LILYGO-H310
The TTGO T-Camera Mic from LilyGO is a microcontroller based on an ESP32 with a built-in camera, microphone, a PIR sensor and a 0.96 inch OLED display. The CP2104 USB to serial converter makes it easy to program, even as an Arduino. The board has a m..
€21.00
Ex Tax:€17.36
Model: LILYGO-Q124
The TTGO T-Camera Mic from LilyGO is a microcontroller based on an ESP32 with a built-in fisheye camera, microphone, a PIR sensor and a 0.96 inch OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a ..
€19.50
Ex Tax:€16.12
Model: LILYGO-H382-Q122
The TTGO Camera from LilyGO is a microcontroller based on an ESP32 with a built-in camera and capacitive touch sensor. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be..
€24.00
Ex Tax:€19.83