Model: BH1750FVI
This light sensor has a large range en can be used (for example) to adjust the backlight of an LCD screen by measuring the available lighting.
This module has a sensing range form 1 - 65535 lx.
Specifications:
Voltage (power supply and sign..
€3.50
Ex Tax:€2.89
New
Model: DFROBOT-SEN0101
Brand: DFRobot
With this sensor you can detect the color of an object. There are four LEDs on the module as a light source...
€8.50
Ex Tax:€7.02
Model: DFROBOT-SEN0611
Brand: DFRobot
This Gravity Color Temperature and Ambient Light Sensor from DFRobot offers both color temperature and light intensity detection. The module has a built-in sensor that measures the color temperature and brightness of ambient light. These values are e..
€30.00
Ex Tax:€24.79
Model: DFROBOT-SEN0540
This Gravity LTR390-UV sensor from DFRobot offers both ambient and UV light detection. The module contains a separate microcontroller that reads out the light sensor. This microcontroller can then be read out via I2C or UART (selectable via a switch)..
€8.50
Ex Tax:€7.02
New
Model: DFROBOT-SEN0212
Brand: DFRobot
A color sensor module from DFRobot. The module has four LEDs as a licht source with the color sensor in the middle. The sensor contains an IR blocking filter...
€8.50
Ex Tax:€7.02
Model: GL5528
A photosensitive resistor (LDR) to measure the amount of light. The resistance varies based on the amount of light the LDR receives. See the datasheet under the tab "Downloads" for more information.
The main differences between the GL55XX sensors ..
€0.30
Ex Tax:€0.25
Model: GL5537-1
A photosensitive resistor (LDR) to measure the amount of light. The resistance varies based on the amount of light the LDR receives.
The main differences between the GL55XX sensors are explained below:
Type
Resistance (@ 10 Lux)..
€0.30
Ex Tax:€0.25
Model: GY-APDS-9900
An environmental sensor that can detect light and proximity, among other things. The module has a built-in level converter, allowing it to be used with both 3.3V and 5V microcontrollers...
€3.50
Ex Tax:€2.89
Model: KS0028
An LDR (light-dependent resistor) module from Keyestudio to measure the lightintensity...
€3.00
Ex Tax:€2.48
Model: LIGHTSENSORV3
Detects change in light with this adjustable module.
Operates on 3.3V t/m 5V. The output D0 is HIGH when the light intensity drops below the threshold. When the light intensity is above the threshhold the output is LOW.
The output&nb..
€2.50
Ex Tax:€2.07
Model: LILYPADTEMT6000
A light sensor (TEMT6000) especially for LilyPad products.
By reading out the analog voltage you can measure the light intensity in your environment (measuring on "S" pin)
This sensor works on 5V DC.
..
€4.00
Ex Tax:€3.31
Model: M5STACK-U009
Brand: M5Stack
The M5Stack Color Unit is an RGB color sensor module for M5Stack. The module works via I2C communication.
Specifications:
Sensor: TCS3472
I2C address: 0x29
2x LEGO® holes for mounting
Grove connection
Package contents:
1x Co..
€12.50
Ex Tax:€10.33
Model: M5STACK-U065
Brand: M5Stack
This is a laser receiver module with Grove connection for the M5Stack.
This works together with the M5Stack Laser TX Unit.
Specifications:
Wavelength receiver: 650nm
2x LEGO® compatible holes
1x Grove connection (1x Grove cabl..
€6.00
Ex Tax:€4.96
Model: M5STACK-U021
Brand: M5Stack
This is a module with an LDR sensor for M5Stack.
Specifications:
LM393 LDR sensor
Adjustable digital output via potentiometer
2x LEGO® compatible holes
1x Grove connection (1x Grove cable included)
Package content:
1x Light ..
€5.50
Ex Tax:€4.55
Discontinued
Model: ML8511MOD
With this module based on an ML8511 chip you can easily measure the UV light intensity inside and/or outside. The module measures both UV-A and UV-B light and gives an analog output signal.
Specifications:
Input voltage: 3.3-5V DC
Input cu..
€5.50
Ex Tax:€4.55
Model: PCF8591
This module has 4 analog to digital (A/D) converters, 1 digital to analog (D/A) converter and 3 built-in sensors: A light sensor, a temperature sensor and a potentiometer. The sensors are connected via the included 2P jumpers, if a built-in sensor is..
€3.50
Ex Tax:€2.89
Model: RAK-100044
An ambient light sensor module from RAKwireless for the modular WisBlock system...
€6.50
Ex Tax:€5.37
New
Model: RPISENSEHATV2
The Sense HAT is an extensive module with numerous sensors made for a Raspberry Pi single board computer (SBC). This V2 version has an additional light (color) sensor.
Note: Because the PCB becomes warm, the temperature sensors will not accurately..
€39.75
Ex Tax:€32.85
Model: REDLASERSENSOR
With this indoor laser sensor module you can detect laser signals in order to send digital signals via the laser.
Specifications:
Input voltage: 5V DC
Binary output signal (0 or 5V)
Can be used in combination with a red laser
Only suit..
€2.00
Ex Tax:€1.65
Model: SEEED-101020580
The Grove light, gesture, color and proximity sensor from Seeed Studio is based on the TMG39931 sensor. This sensor has advanced gesture detection, proximity detection, digital ambient light detection (ALS) and color detection (RGBC).
Specificatio..
€17.00
Ex Tax:€14.05
Model: SEEED-114992868
This SenseCAP light intensity sensor from Seeed Studio has a wide measuring range and can be used at a great distance with LoRaWAN. Due to the dust-proof and splash-proof housing, this sensor can also be used outdoors. The sensor is easy to configure..
€71.00
Ex Tax:€58.68
Model: TCS3200DMOD
With this sensor you can detect the color of an object. There are four LEDs on the module as a light source.
In the middle is the TCS3200D color sensor (upgraded version of the TCS230 sensor).
Specifications:
Voltage: 2.7 - 5.5V DC
Power ..
€5.25
Ex Tax:€4.34
Model: TCS34725MOD-RECT
This sensor module can detect the color of an object. The module has two LEDs as a light source with the color sensor in the middle. Because of the built-in level converter, the sensor can be used with both 3.3V and 5V microcontrollers.
Specificat..
€3.50
Ex Tax:€2.89
Model: TEMT6000MOD
With the TEMT6000 light sensor module you can easily read out the amount of light in an analog way.
With this module, a 3-pin header is supplied to solder onto the module.
The module also has a 3mm hole for mounting.
See the datasheet for more i..
€3.00
Ex Tax:€2.48
Model: UVSENSORMOD
With this module you can easily measure the UV light intensity indoors and/or outdoors. The module provides an analog output signal.
Specifications:
Supply voltage: 3.3-5V DC
Maximum current consumption: 0.1mA
Average current consumption..
€5.00
Ex Tax:€4.13
Model: DFROBOT-SEN0562
This waterproof digital ambient light sensor is well suited for outdoor use. In addition, the sensor also has 50/60Hz light noise suppression to ensure stable and reliable measurements...
€10.00
Ex Tax:€8.26
Model: WS-20232
Brand: DFRobot
This environment sensor module from Waveshare is made for the Raspberry Pi Pico or other microcontrollers that use the same pin layout. This allows you to measure movement, temperature, humidity, light and air quality.
Note: No Raspberry Pi Pico i..
€35.00
Ex Tax:€28.93
-for-raspberry-pi-default-600x600.jpg "Waveshare Sense HAT (B) for Raspberry Pi")
Model: WS-16864
Brand: Waveshare
With this HAT you provide your Raspberry Pi with various sensors that communicate via I2C. The HAT is designed for the Raspberry Pi Zero, but also works with other models. In addition, the module can also be used with other microcontrollers such as a..
€36.50
Ex Tax:€30.17
Model: WMD1MBH1750FVISHIELD
A shield with a BH1750FVI light sensor for the (Wemos) D1 Mini.
The shield works with I2C and the I2C address is adjustable.(see PCB)
Specifications:
Range of light intensity: 1 - 65535 lx
50/60 Hz light noise filter function
Operates o..
€3.50
Ex Tax:€2.89
Showing 1 to 36 of 36 (1 Pages)