Model: HC-05BACKPLANE
This backplane is intended to solder an HC-05, HC-06, HM-10 or comparable module.
This makes the RX, TX, STATE, EN pin easy to connect to the bluetooth module.
This board only ensures that the voltage on the module is brought to 3.3V (from..
€1.50
Ex Tax:€1.24
Model: BB170PBLACK
A breadboard ideal for combining with an Arduino! (especially the Arduino Nano)
There are 85 holes on both sides.
At the bottom there is an adhesive layer for placement on a flat surface, system etc.
Dimensions: 47 x 35 x 9mm
Suitable for..
€1.00
Ex Tax:€0.83
Model: BB170PBLUE
Ideal for combining a breadboard with an Arduino! (especially the Arduino Nano)
There are 85 holes on both sides.
At the bottom is an adhesive layer for placement on a plate, system etc.
Dimensions: 47 x 35 x 9mm
Suitable for wires betwee..
€1.00
Ex Tax:€0.83
Model: BB170PGREEN
Ideal for combining a breadboard with an Arduino! (especially the Arduino Nano)
There are 85 holes on both sides.
At the bottom there is an adhesive layer for placement on a plate, system etc.
Dimensions: 47 x 35 x 9mm
Suitable for wires ..
€1.00
Ex Tax:€0.83
Model: BB170PRED
Ideal for combining a breadboard with an Arduino! (especially the Arduino Nano)
There are 85 holes on both sides.
At the bottom there is an adhesive layer for placement on a plate, system etc.
Dimensions: 47 x 35 x 9mm
Suitable for wires ..
€1.00
Ex Tax:€0.83
Model: BB170PTRANSP
Ideal for combining a breadboard with an Arduino! (especially the Arduino Nano)
There are 85 holes on both sides.
At the bottom there is an adhesive layer for placement on a plate, system etc.
Dimensions: 47 x 35 x 9mm
Suitable for wires ..
€1.00
Ex Tax:€0.83
Model: BB170PWHITE
A breadboard that can idealy be combined with an Arduino! (especially the Arduino Nano)
There are 85 holes available on each side.
There is adhesive layer on the bottom so you can stick it on a plate or system etc.
Dimensions: 47 x 35 x 9mm ..
€1.00
Ex Tax:€0.83
Model: BB170PYELLOW
Ideal for combining a breadboard with an Arduino! (especially the Arduino Nano)
There are 85 holes on both sides.
At the bottom there is an adhesive layer for placement on a plate, system etc.
Dimensions: 47 x 35 x 9mm
Suitable for wires ..
€1.00
Ex Tax:€0.83
Model: BB270P
A breadboard ideal to combine with an Arduino! (Especially an Arduino Nano)
Both sides contain 115 connection holes and a power supply rail with 20 holes.
Dimensions: 90 x 53 x 9mm
Suitable for wires between 20 and 29 AWG...
€2.50
Ex Tax:€2.07
Model: BB400P
A breadboard that is idealy combined with an Arduino!
For the power supply there are 100 points available, the mid section contains 300 points.
There is an adhesive layer on the bottem so you can stick it to a plate or system etc.
You can connect ..
€2.25
Ex Tax:€1.86
Model: BB400PTRANSP
A breadboard ideal for combining with an Arduino!
There are 100 points for the power supply, the centerpiece contains 300.
At the bottom there is an adhesive layer for placement on a flat surface, system etc.
Two (or more) of these breadboards can..
€2.25
Ex Tax:€1.86
Model: VM-SDAD102
A breadboard with 456 points, useful for prototyping.
Specifications:
Material:
Exterior plastic: ABS
Connections: Alloy of silver and nickel
Points: 456
Dimensions: 81 x 62 x 9 mm..
€7.50
Ex Tax:€6.20
Model: BB830P
A breadboard that is idealy combined with an Arduino!
For the power supply there are 200 points available, the mid section contains 630 points.
There is an adhesive layer on the bottem so you can stick it to a plate or system etc.
You can connect ..
€3.00
Ex Tax:€2.48
Model: BB830PTRANSP
A breadboard ideal for combining with an Arduino!
200 points are present for the power supply, the center piece contains 630.
At the bottom is an adhesive layer for placement on a flat surface, system etc.
Two (or more) of these breadboards can be..
€3.00
Ex Tax:€2.48
-wifi-module-600x600.jpg "Breakout Board for ESP-01(S)")
Model: BREAKOUT-ESP-01
This is a breakout board for an ESP-01(S) module with which it can easily be used on a breadboard, for example. The ESP-01 module must be mounted on the board in such a way that the 3.3V and RX pin are on the side of the capacitor.
Note: Moun..
€1.00
Ex Tax:€0.83
Model: 582693478794
This is a development board for the ESP32-WROOM Wi-Fi module. The ESP32-WROOM can easily be connected to this. With the help of this board, the module can be controlled and programmed without having to solder...
€9.50
Ex Tax:€7.85
Model: DEVBOARDEPS32WROVER
This is a development board for the ESP32-WROVER Wi-Fi module. The ESP32-WROVER can easily be connected to this. With the help of this board, the Wi-Fi module can be controlled and programmed without having to solder.
This board uses a CP2..
€9.50
Ex Tax:€7.85
Model: DEVBOARD-ESP8266
This is a development board for ESP8266 Wi-Fi modules. Using this board, the Wi-Fi module can be controlled and programmed without soldering.
Specifications:
Compatible ESP boards: ESP-01, ESP-01S, ESP-07, ESP-07S, ESP-12E, ESP-12F, ESP-12S ..
€10.50
Ex Tax:€8.68
Model: EIC-404
A breadboard that can be used for prototyping...
€13.50
Ex Tax:€11.16
Model: EIC-801
A breadboard that can be used for prototyping...
€3.50
Ex Tax:€2.89
Model: EIC-801-8
A breadboard that can be used for prototyping...
€3.75
Ex Tax:€3.10
Model: EIC-102
A breadboard that can be used for prototyping...
€5.00
Ex Tax:€4.13
Model: EIC-1302
A breadboard that can be used for prototyping...
€5.25
Ex Tax:€4.34
Model: ESP8266-12-BOARD
A handy breakout board for ESP-07 and ESP-12 with a built-in pull-down resistor on GPIO15 and a pull-up resistor on the EN-pin. The breakout board also has the option of soldering a voltage regulator on it, so that the ESP module can also b..
€1.50
Ex Tax:€1.24
Model: PCB15x20DUBHOLESLANES
An experimental circuit board to place and solder components on. This is ideal for small hobby projects. This version has double islands with two surrounding lanes (see picture).
Note: Due to the production process, some copper splinters may occur..
€3.50
Ex Tax:€2.89
Model: PCB2x8DUB
An experimental circuit board for placing and soldering components.
This variant is double-sided and can therefore be soldered from both sides.
Ideal for small hobby projects!
Distance between holes: 2.54mm (default)
Diameter holes..
€0.60
Ex Tax:€0.50
Model: PCB4x6DUB
An experimental circuit board for placing and soldering components.
This variant is double-sided and can therefore be soldered from both sides.
Ideal for small hobby projects!
Distance between holes: 2.54mm (default)
Diameter holes..
€0.70
Ex Tax:€0.58
Model: PCB5x7
An experiment PCB to place and solder components on. This is ideal for small hobby projects.
Specifications:
Distance between holes: 2.54mm
Hole diameter: 1mm
Dimensions: 5 x 7cm
Note: This circuit board may be a bit crooked/hollow...
€0.60
Ex Tax:€0.50
Model: PCB5x7DOUBLEHOLES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has double islands (see image).
Specifications:
Distance between holes: 2.54mm
Hole diameter: 1mm
Dimensions: 5 x 7cm
Note: Th..
€0.65
Ex Tax:€0.54
Model: PCB5x7DUB
An experimental circuit board to place and solder components on. This variant is double-sided and can therefore be soldered from both sides. Ideal for small hobby projects!
Specifications:
Color PCB: Green
PCB type: Double sided
Distance..
€0.80
Ex Tax:€0.66
Model: PCB5x7DIVERSELANES
An experiment PCB to place and solder components on. This is ideal for small hobby projects.
This version has several lanes and islands. (see image)
Specifications:
Distance between holes: 2.54mm
Hole diameter: 1mm
Dimensions: 5 x 7cm
..
€0.65
Ex Tax:€0.54
Model: PCB6.5x14.5
An experiment PCB to place and solder components on. This is ideal for small hobby projects.
Specifications:
Distance between holes: 2.54mm
Hole diameter: 1mm
Dimensions: 6.5 x 14.5cm
Note: This circuit board may be a bit crooked/ho..
€0.90
Ex Tax:€0.74
Model: PCB6.5x14.5LANES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has lanes over the entire length (see image).
Specifications:
Distance between holes: 2.54mm
Hole diameter: 1mm
Dimensions: 6.5 x 1..
€2.00
Ex Tax:€1.65
Model: PCB7x9
An experiment PCB to place and solder components on. This is ideal for small hobby projects.
Specifications:
Distance between holes: 2.54mm
Hole diameter: 1mm
Dimensions: 7 x 9cm
Note: This circuit board may be a bit crooked/hollow...
€1.00
Ex Tax:€0.83
Model: PCB7x9DOUBLEHOLES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has double islands (see image).
Specifications:
Distance between holes: 2.54mm
Hole diameter: 1mm
Dimensions: 7 x 9cm
Note: Th..
€0.65
Ex Tax:€0.54
Model: PCB7x9DUBHOLESLANES
An experimental circuit board to place and solder components on. This is ideal for small hobby projects. This version has double islands with two surrounding lanes (see picture).
Note: Due to the production process, some copper splinters may occur..
€2.00
Ex Tax:€1.65
Model: PCB7x9DUB
An experimental circuit board for placing and soldering components.
This variant is double-sided and can be soldered from both sides.
Ideal for small hobby projects!
Distance between holes: 2.54mm (default)
Diameter holes: 1mm
..
€1.50
Ex Tax:€1.24
Model: PCB7x9ENK
An experimental PCB for placing and soldering components.
This variant is single-sided and can therefore be soldered from both sides.
Ideal for small hobby projects!
Distance between holes: 2.54mm (default)
Diameter holes: 1mm..
€1.50
Ex Tax:€1.24
Model: PCB9.5X9.5DUBACCESS
An experimental circuit board for placing and soldering components. This variant is double-sided and can therefore be soldered from both sides. Ideal for small hobby projects!
Specifications:
Distance between holes: 2.54mm (default)
Diamet..
€4.00
Ex Tax:€3.31
Model: PCB9x15
An experiment PCB to place and solder components on. This is ideal for small hobby projects.
Specifications:
Distance between holes: 2.54mm
Hole diameter: 1mm
Dimensions: 9 x 15cm
Note: This circuit board may be a bit crooked/hollow..
€2.00
Ex Tax:€1.65
Model: PCB9x15DOUBLEHOLES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has double islands (see image).
Specifications:
Distance between holes: 2.54mm
Hole diameter: 1mm
Dimensions: 9 x 15cm
Note: T..
€2.50
Ex Tax:€2.07
Model: PCB9x15DUB
An experimental circuit board for placing and soldering components.
This variant is double-sided and can be soldered from both sides.
Ideal for small hobby projects!
Distance between holes: 2.54mm (default)
Diameter holes: 1mm..
€2.50
Ex Tax:€2.07
Model: PCB9x15LANES
An experiment PCB to place and solder components on. This is ideal for small hobby projects. This version has lanes over the entire length (see image).
Specifications:
Distance between holes: 2.54mm
Hole diameter: 1mm
Dimensions: 9 x 15c..
€2.00
Ex Tax:€1.65
Model: PCB9x15TRIHOLESLANES
An experimental circuit board to place and solder components on. This is ideal for small hobby projects. This version has double islands with two surrounding lanes (see picture).
Note: Due to the production process, some copper splinters may occur..
€2.75
Ex Tax:€2.27
Model: HT-DEVBP
This breakout board is compatible with the Heltec CT62 and wireless shell modules.
Note: There is no HT-CT62 or Wireless Shell module on it yet (photo 2 and 3 are just examples)...
€7.00
Ex Tax:€5.79
Model: M5STACK-K039
Brand: M5Stack
The M5Stack ATOMIC Proto Kit is a DIY proto kit designed for the M5ATOM series. The module can be connected directly via the 9 pins on an M5ATOM. The kit consists of a PCB with connection material and a housing with accessories.
Specificatio..
€15.00
Ex Tax:€12.40
Model: M5STACK-A077
Brand: M5Stack
The M5Stack ATOMIC Proto Kit is a DIY proto kit designed for the M5ATOM series. The module can be connected directly via the 9 pins on an M5ATOM. The kit has 2 PCBs included and a housing. Each PCB has 60 holes on which certain components can be sold..
€4.75
Ex Tax:€3.93
