B-Stock
B-Stock
Discontinued
Model: DATALOGSHIELD
A shield with an RTC and SD card holder/reader (SD card is connected directly to the Arduino via the shield). This allows you to easily log data with time stamps and put it on an SD card. There is a 3.3V level converter on the shield so you can ..
€6.00
Ex Tax:€4.96
New
Model: DFROBOT-DFR0229
Brand: DFRobot
A micro SD card module from DFRobot that is compatible with 5V microcontrollers bacause of the built-in resistor dividers. The pinout is also fully compatible with the expansion shield from DFRobot...
€4.25
Ex Tax:€3.51
Model: AT24C256MOD
EEPROM module with 256 Kbits of memory space. The module has the I2C pull-up pins built in.
This module has passed the inputs and outputs of the chip to headers and jumpers:
Pin
Function
VCC
Input voltage (2.7-5...
€2.00
Ex Tax:€1.65
Model: GOOBAY58261
An SD card reader from Goobay that has both a USB-A and a USB-C connector. The card reader has 2 card slots, one slot for a normal SD card, and one slot for a micro SD card. Both cards can be read at the same time...
€16.50
Ex Tax:€13.64
Model: LILYGO-H610
LilyGO's TF (SD card) Shield is a shield suitable for LilyGO's T-Display series. This version has female pin headers, making it suitable for a T-Display with male headers...
€4.50
Ex Tax:€3.72
Model: LILYGO-H609
LilyGO's TF (SD card) Shield is a shield suitable for LilyGO's T-Display series. This version has male pin headers, making it suitable for a T-Display with female headers, or one without headers...
€4.50
Ex Tax:€3.72
Model: LILYGO-H485
A small adapter module that makes it possible to easily use an SD card with the LilyGO TTGO T5 4.7 inch E-paper E-ink ESP32...
€2.50
Ex Tax:€2.07
Model: M5STACK-K044
Brand: M5Stack
The Atomic TF-CARD is an M5Atom compatible module for reading TF cards (Compatible with microSD) up to 16GB. The reader contains 2 parts: The TF-CARD reader module and the M5Atom Lite (included).
This module allows the ATOM Matrix or ATOM Lite to ..
€14.00
Ex Tax:€11.57
Model: M5STACK-A135
Brand: M5Stack
An SD (TF) card reader from M5Stack for the Atom series...
€6.00
Ex Tax:€4.96
Model: microSDADAP
An SD card adapter that works with SPI. The module operates on 5V power supply and can be controlled with 3.3V or 5V signals using the built-in level shifter. This module supports micro SD and SDHC with a maximum storage capacity of 32GB.
The pins a..
€3.00
Ex Tax:€2.48
Model: OP-EMMC-256GB
Brand: Orange Pi
An eMMC data storage module from Orange Pi. This module with eMMC 5.1 standard features data transfer speeds upo to 400MB/s and has a built in power loss protection...
€34.50
Ex Tax:€28.51
Model: OPEMMC-32G
Brand: Orange Pi
An eMMC data storage module from Orange Pi. This module with eMMC 5.1 standard features data transfer speeds upo to 400MB/s and has a built in power loss protection...
€11.00
Ex Tax:€9.09
Model: OPEMMC-64G
Brand: Orange Pi
An eMMC data storage module from Orange Pi. This module with eMMC 5.1 standard features data transfer speeds upo to 400MB/s and has a built in power loss protection...
€16.00
Ex Tax:€13.22
Model: VA001-128GB
An eMMC 5.1 data storage module from Radxa...
€49.50
Ex Tax:€40.91
Model: VA001-16GB
An eMMC 5.1 data storage module from Radxa...
€11.50
Ex Tax:€9.50
Model: VA001-32GB
An eMMC 5.1 data storage module from Radxa...
€18.00
Ex Tax:€14.88
Model: VA001-64GB
An eMMC 5.1 data storage module from Radxa...
€31.00
Ex Tax:€25.62
Model: RA004
A USB module from Radxa to read eMMC modules from, amongst others, Radxa and Orange Pi...
€8.00
Ex Tax:€6.61
Model: RAK-100031
A micro SD card module from RAKwireless for the modular WisBlock system...
€5.00
Ex Tax:€4.13
Model: SDADAP
An SD card adapter that works with SPI. The module works with with a 3.5V of 5V supply and needs to be controlled with 3.3V signals.
The pins are shown on the PCB:
Pin
Description
(2x) GND
Ground, min
+..
€2.50
Ex Tax:€2.07
On request
Model: TEENSYPROPSHIELD
With this shield for Teensy 3.2 and Teensy LC you expand the microcontroller with the following features:
Accelerometer (FXOS8700)
Gyroscope (FXAS21002)
Air pressure sensor and altimeter (MLP3115)
8MB Flash memory
Fast LED driver
2W A..
€20.50
Ex Tax:€16.94
Model: TEENSYPROPSHIELDLC
With this shield for Teensy 3.2 and Teensy LC you expand the microcontroller with the following features:
8MB Flash memory
Fast LED driver
2W Audio amplifier (LM48310)
For more information, see the following page: Prop Shield With..
€10.00
Ex Tax:€8.26
Model: TEENSYWIZ820SDCARD
With this adapter you can connect a WIZ820io or WIZ850io ethernet module and/or a micro SD card to your Teensy.
For more information, see this page: WIZ820io & Micro SD Card Adapter
Note: This product does not include pin headers...
€8.00
Ex Tax:€6.61
Model: SH-LOGGER
An RTC shield for the TinyPICO, TinyS2/S3/C6 or ProS3 development boards. Furthermore, the shield has an SD card slot, two STEMMA QT/Qwicc connectors and a connector for a Li-ion/Li-Po battery (module has no charging circuit). The button on the modul..
€14.00
Ex Tax:€11.57
Model: WS-26583
This PCIe to M.2 adapter board from Waveshare can be used to connect an NVMe M.2 SSD to the Raspberry Pi 5. The board has built-in vents for possible cooling fans and contains a power monitoring chip.
Note: Raspberry Pi 5 and SSD are not included...
€8.50
Ex Tax:€7.02
Model: WMD1MSDSHIELD
A shield with microSD card adapter for the (Wemos) D1 Mini.
The required pins are listed on the PCB.
Pin headers are included with this shield (as shown)
For more information, see this page: Micro SD Card Shield
Note: Because Wemos regular..
€2.50
Ex Tax:€2.07
Showing 1 to 28 of 28 (1 Pages)