Model: 12VREL16L-SD
An easy to use low active relay module with 16 relays in total. In addition, this module also contains a voltage converter to power the circuit and possibly an external microcontroller.
Specifications:
Supply voltage: 12V DC (via VCC pin)
..
€14.00
Ex Tax:€11.57
Model: 12VRELHL-30A
..
€6.00
Ex Tax:€4.96
Model: 12VREL2HL-30A
..
€7.50
Ex Tax:€6.20
Model: 12VREL4HL-30A
..
€10.00
Ex Tax:€8.26
Model: 12VRELADJ
A relay with an adjustable delay that works on 12V. As soon as the relay is powered with 12V, it takes a few (adjustable) seconds before the relay switches. The relay will only switch back when the input voltage disappears (see images).
Specificat..
€2.50
Ex Tax:€2.07
Model: 12VRELADJ-1H-NONCADJ
A relay with an adjustable delay that works on 12V. As soon as the relay is powered with 12V, it takes a few (adjustable) seconds before the relay switches. The time can be set between 0.1s and 1 hour. In addition, this relay module can also be set t..
€5.00
Ex Tax:€4.13
New
Model: 24VREL8HL-30A
..
€18.00
Ex Tax:€14.88
Model: 5VRELHA
A simple module with one relay.
This version works on 5V. The input works on 0V and 5V (active high).
The relay therefore switches if there is a signal of 5V on the input ("IN") and does nothing (not switched) with a signal of 0V.
Specifica..
€2.50
Ex Tax:€2.07
Model: 5VRELHL
An easy to use relay module that can be set to high- or low-active.
Specifications:
Supply voltage: 5V DC
Signal voltage: 3.3-5V
Current per relay (when switched on): ~70mA
Signal current ("IN" pin): ~5mA
Maximum voltage through..
€2.50
Ex Tax:€2.07
Model: 5VREL2HL
An easy to use relay module that can be set to high- or low-active.
Pinout:
DC+: 5V supply voltage
DC-: Ground/GND
IN1-IN2: Signal pins
NO: Relay normally open
COM: Relay common
NC: Relay normally closed..
€4.50
Ex Tax:€3.72
Model: 5VREL2L
A moduele with two relays on board.
This version works on 5V. The input works on 0V and 5V (Active low).
The relay therefore switches if there is a 0V signal on the input ("IN") and does nothing (not switched) with a signal of 5V.
Specifica..
€4.50
Ex Tax:€3.72
Model: 5VREL4HL
An easy to use relay module that can be set to high- or low-active.
Pinout:
DC+: 5V supply voltage
DC-: Ground/GND
IN1-IN4: Signal pins
NO: Relay normally open
COM: Relay common
NC: Relay normally closed..
€7.00
Ex Tax:€5.79
Model: 5VREL4
A module with four relays on board.
This version works on 5V. The input works on 0V and 5V (Active low).
The relay therefore switches if there is a 0V signal on the input ("IN") and does nothing (not switched) with a signal of 5V.
Specifica..
€7.00
Ex Tax:€5.79
Model: 5VREL8HL
An easy to use relay module that can be set to high- or low-active.
Specifications:
Supply voltage: 5V DC
Signal voltage: 3.3-5V
Current per relay (when switched on): ~70mA
Signal current ("IN" pins): ~5mA
Maximum voltage throug..
€10.00
Ex Tax:€8.26
Model: 5VREL8
A module with eight relays on board.
This version works on 5V. The input works on 0V and 5V (active low).
The relay therefore switches if there is a 0V signal on the input ("IN") and does nothing (not switched) with a signal of 5V.
Specific..
€10.00
Ex Tax:€8.26
Model: 5VREL1HL-30A
..
€6.00
Ex Tax:€4.96
Model: 5VREL4HL-30A
..
€10.00
Ex Tax:€8.26
Model: 5VREL2HL-30A
..
€7.50
Ex Tax:€6.20
-1-channel-low-active-detail-600x600.jpg "5V Relay Module for ESP-01(S) - 1 Channel - Low-active")
2-4 Weeks
Model: 5VRELL-ESP01
A relay module specially made to be switched by an ESP-01(S) module.
Note: An ESP-01(S) module is not included...
€2.50
Ex Tax:€2.07
Model: 5VSOLIDREL1H
A solid state relay (SSR) works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Relay type: G3MB-202P
Supply..
€4.00
Ex Tax:€3.31
Model: 5VSOLIDREL1L
A solid state relay works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Uses 5V G3MB-202P Solid State relay ..
€4.00
Ex Tax:€3.31
Model: 5VSOLIDREL2L
A solid state relay works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Uses 5V G3MB-202P Solid State relay ..
€5.50
Ex Tax:€4.55
Model: 5VSOLIDREL4H
A solid state relay works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Uses 5V G3MB-202P Solid State relay ..
€8.00
Ex Tax:€6.61
Model: 5VSOLIDREL4L
A solid state relay works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it is not subject to mechanical wear.
Specifications:
Uses 5V G3MB-202P Solid State relay th..
€8.00
Ex Tax:€6.61
Model: 5VSOLIDREL8H
A solid state relay (SSR) works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Relay type: G3MB-202P
Supply..
€12.00
Ex Tax:€9.92
Model: A000110
This Arduino 4 Relays Shield is a board with four individually controlled relays.
Specifications:
Operating voltage: 5V
Coil current: 35 mA (for each relay that is switched on, so 140 mA with all relays switched on)
Max. current pe..
€28.00
Ex Tax:€23.14
Model: DFROBOT-DFR0144
Brand: DFRobot
A relay shield suitable for Arduino Uno (compatible) boards. In addition to the relays, this shield also has an adapter for an Xbee module and a number of servo connectors...
€15.50
Ex Tax:€12.81
Model: DFROBOT-DFR0996
A latching relay module from DFRobot that works on both 3.3V and 5V. This relay holds its last set state, even when powered off.
Note: Due to the PCB design, this module is not safe for switching mains voltage...
€7.00
Ex Tax:€5.79
Model: LILYGO-H630
An expansion module for the T-RelayS3. The module is easy to connect via the included cable. In total, a maximum of 3 can be connected in sequence for a total of 24 relays (including the 6 of the T-RelayS3)...
€18.50
Ex Tax:€15.29
Model: LILYGO-H561
The T-Relay-8 is a handy relay module with Wi-Fi and Bluetooth. This module has 8 relays and an ESP32-Wrover.
Note: This board does not have a built-in USB to serial converter, to program the board the following converter is needed: TTGO T-U2T..
€23.50
Ex Tax:€19.42
Model: LILYGO-H629
The T-RelayS3 is a handy relay module with Wi-Fi and Bluetooth. This module contains 6 relays and an ESP32-S3 microcontroller. The module comes with a housing that can be mounted on a DIN rail. In addition, the design offers the possibility to easily..
€39.50
Ex Tax:€32.64
Model: LILYGO-H559
LilyGO's T-SimHat is an expansion module/HAT for LilyGO's T-SIM series and is suitable for the SIM7000, A7670 and A7608 series. This hat comes with a relay and a connection for CAN and RS485...
€12.50
Ex Tax:€10.33
Model: LILYGO-H516
The T-Relay is a handy relay module with Wi-Fi and Bluetooth. This module has 4 relays and an ESP32-Wrover.
See the following page for more information and examples: LilyGO T-Relay Github
Note: This board does not have a built-in USB to serial ..
€15.00
Ex Tax:€12.40
Model: M5STACK-M124
Brand: M5Stack
A relay module from M5Stack that is suitable for switching mains voltage...
€15.00
Ex Tax:€12.40
Model: M5STACK-M121-V11
Brand: M5Stack
A relay module from M5Stack with 4 channels. The relays are controlled via an STM32F030 microcontroller, which in turn can be controlled by an M5Core via I2C...
€14.00
Ex Tax:€11.57
Model: M5STACK-U097
Brand: M5Stack
A relay module for M5Stack products.
Specifications:
Relay:
Maximum switching voltage: 250V AC or 28V DC
Maximum switching current:
Resistive load: 10A
Number of channels: 4
Communication: I2C
I2C ad..
€16.50
Ex Tax:€13.64
Model: M5STACK-U140
Brand: M5Stack
A solid state relay from M5Stack, suitable for switching DC voltages up to 220V DC...
€22.50
Ex Tax:€18.60
Model: M5STACK-U023
Brand: M5Stack
This is a mini relay module for M5Stack.
Specifications:
Maximum voltage through relay: 220V AC or 30V DC
Maximum current through relay: 3A
2x LEGO® compatible holes
1x 3 Pin HT3.96 connection (for the relay pins)
1x Grove connection..
€6.00
Ex Tax:€4.96
Model: M5STACK-U122
Brand: M5Stack
This is a solid state relay (SSR) Unit from M5Stack. An SSR works the same as a standard (mechanical) relay. However, an SSR can be turned on and off much more often because it does not experience mechanical wear. Another important difference is that..
€9.50
Ex Tax:€7.85
Model: SEEED-103020012
A high active relay module with 1 channel from Seeed Studio. By simply applying a 5V signal to the SIG pin, the relay changes state.
Specifications:
Supply voltage: 5V DC
Signal voltage: 5V
Relay:
Maximum switching voltage: 250V AC..
€13.00
Ex Tax:€10.74
Model: SEEED-103020133
A relay module from Seeed Studio with accompanying enclosure. The relays are easy to control individually via I2C.
Specifications:
Supply voltage: 5V DC
Signal voltage: 3.3V
Communication: I2C
Default I2C address: 0x11 or 0x12
Relay:..
€18.50
Ex Tax:€15.29
Model: WS-20218
Brand: Waveshare
A nicely finished relay module from Waveshare that is specially made for the Raspberry Pi Pico (or microcontrollers with the same pin layout). Both the power supply and the signals for the relays are galvanically isolated.
Note: Raspberry Pi Pico ..
€18.00
Ex Tax:€14.88
Model: WS-15423
Brand: Waveshare
With this relay module for Raspberry Pi, devices can be switched. Switching is done via eight pre-set GPIO pins of the Raspberry Pi or via the external pin headers or screw terminals with another microcontroller such as an Arduino or ESP. In the latt..
€20.00
Ex Tax:€16.53
Model: WS-11638
Brand: Waveshare
With this relay module for Raspberry Pi, devices can be switched. Switching is done via three preset GPIO pins of the Raspberry Pi, which can be adjusted with jumper wires if necessary.
Specifications:
Maximum voltage through relay: 250V AC ..
€15.50
Ex Tax:€12.81
Model: WMD1MRELAYSHIELD
A shield with relay for the (Wemos) D1 Mini.
The asterisk on a pin indicates that the shield works via this pin.
Pin headers are included with this shield (as shown)
For more information, see this page: Relay Shield
Note: Because Wemos..
€3.50
Ex Tax:€2.89
Showing 1 to 49 of 49 (1 Pages)