Model: SCT013-000
Current clamp for AC voltage. The output of the sensor is a current related to input AC current (100A:0.05A ratio).
Specifications:
Input current: 0-100 A
Output current: 0-50 mA
Maximum measurable cable diameter: 13 mm
For mo..
€7.00
Ex Tax:€5.79
Model: SCT013-000V
Current clamp for AC voltage .
Specifications:
Input current: 0-100 A
Output voltage: 0-1 V
Maximum suitable cable diameter: 13 mm
For more information see the datasheet under the tab "Downloads"...
€7.00
Ex Tax:€5.79
Model: SCT013-005
Current clamp for AC voltage . ..
€7.00
Ex Tax:€5.79
Model: SCT013-010
Current clamp for AC voltage . ..
€7.00
Ex Tax:€5.79
Model: SCT013-030
Current clamp for AC voltage .
Specifications:
Input current: 0-30 A
Output voltage: 0-1 V
Maximum suitable cable diameter: 13 mm
For more information see the datasheet under the tab "Downloads"...
€7.00
Ex Tax:€5.79
Model: SCT013-050
Current clamp for AC voltage . ..
€7.00
Ex Tax:€5.79
Model: ACS712-20A
A simple current sensor that can measure both DC and AC current. When the measured current is zero, the output voltage is half the supply voltage.
See the following pages for examples using a similar module: Measure AC current by interfacing ACS71..
€4.00
Ex Tax:€3.31
Model: GY-712-30A
A simple current sensor that can measure both DC and AC current. When the measured current is zero, the output voltage is half the supply voltage.
See the following pages for examples using a similar module: Measure AC current by interfacing ACS71..
€4.00
Ex Tax:€3.31
Model: ACS712-5A
A simple current sensor that can measure both DC and AC current. When the measured current is zero, the output voltage is half the supply voltage.
See the following pages for examples using a similar module: Measure AC current by interfacing ACS71..
€4.00
Ex Tax:€3.31
Model: ACS724MOD50A
A simple current sensor that can measure both DC and AC current. When the measured current is zero, the output voltage is half the supply voltage.
See the following pages for examples using a similar module: Measure AC current by interfacing ACS71..
€4.00
Ex Tax:€3.31
Model: ADS1115MOD
An ADC module that can measure voltage with high resolution. In addition, the module also has a built-in adjustable signal amplifier to be able to measure small voltages...
€5.50
Ex Tax:€4.55
Model: DFROBOT-DFR0316
Brand: DFRobot
An ADC module that can measure voltage with high resolution. In addition, the module also has a built-in signal amplifier to be able to measure small voltages...
€12.00
Ex Tax:€9.92
Model: DFROBOT-SEN0098-V2
A current sensor from DFRobot that can measure both AC and DC current...
€14.50
Ex Tax:€11.98
Model: GY-MCP3421
An analog to digital converter (ADC) module...
€5.00
Ex Tax:€4.13
Model: INA219B
With this current and voltage meter you can easily measure the consumption of something or, for example, protect something from too high a current.
The easy thing about this module is that it has a power meter and voltmeter in 1, so you do not need ..
€5.00
Ex Tax:€4.13
Model: INA226
With this current and voltage meter you can easily measure the power consumption of something or, for example, to protect something from too high a current.
The convenience of this module is that it has a current meter and voltage meter in one, so y..
€6.50
Ex Tax:€5.37
Model: INA3221
With this current and voltage sensor you can easily measure the consumption of something. The convenience of this module is that it has a current and voltage sensor in one, so you do not need two separate modules to measure consumption. In addition, ..
€3.25
Ex Tax:€2.69
Model: M5STACK-U069
Brand: M5Stack
This is a module with a 16-bit analog to digital converter for M5StickC. The module works via I2C communication.
Specifications:
Measuring voltage range: 0~12VDC
Chip: ADS1100
Resolution: 16-bit
I2C address: 0x48
2x LEGO® compatible ..
€11.00
Ex Tax:€9.09
Model: M5STACK-U013
Brand: M5Stack
This is a module with a 16-bit analog to digital converter for M5Stack. The module works via I2C communication.
Specifications:
Measuring voltage range: 0~12VDC
Chip: ADS1100
Resolution: 16-bit
I2C address: 0x48
2x LEGO® compatible h..
€7.00
Ex Tax:€5.79
Model: M5STACK-U013-V11
Brand: M5Stack
This is a module with an analog to digital converter (ADC) from M5Stack. The module works via I2C communication and allows you to modify the sample rate, enabling you to achieve various ADC resolutions...
€8.50
Ex Tax:€7.02
Model: M5STACK-U162
The AIN4-20mA Unit is a module that can read sensors that provide an analog signal between 4-20mA. The analog signal is converted by the built-in microcontroller (STM32G030) to a digital value that can be read out via I2C. The module supports both se..
€9.50
Ex Tax:€7.85
Model: M5STACK-U086
Brand: M5Stack
This is an isolated current sensor module with a Grove connection for M5Stack. The module contains a 16-bit ADC (analog to digital) converter, namely the ADS1115. The sensor is factory calibrated with the calibration data stored in the built-in EEPRO..
€12.00
Ex Tax:€9.92
Model: M5STACK-U148
Brand: M5Stack
A handy module from M5Stack to monitor the power consumption of another Unit via the built-in current sensor. The other unit can also be switched off completely via the built-in MOSFET switch...
€6.50
Ex Tax:€5.37
Model: M5STACK-U087
Brand: M5Stack
This is an isolated voltage sensor module with a Grove connection for M5Stack. The module contains a 16-bit ADC (analog to digital) converter, the ADS1115. The sensor is factory calibrated with the calibration data stored in the built-in EEPROM. The ..
€20.00
Ex Tax:€16.53
Model: MCP3008
The MCP3008 chip has an 8-channel ADC with 10-bit resolution. With the SPI interface, a sample rate of 200ksps is possible. This could for example be used to add analog inputs to your Raspberry Pi.
Specifications:
Supply voltage: 2.7-5.5V DC..
€4.00
Ex Tax:€3.31
Model: OL-BB-ADS1220
An ADC module that can measure voltage with high resolution. In addition, the module also has a built-in temperature sensor and a built-in signal amplifier to be able to measure small voltages...
€18.75
Ex Tax:€15.50
Model: OS-ACS712MOD20A
A simple current sensor from Open-Smart that can measure both DC and AC current.
Specifications:
Supply voltage: 4.5 - 5.5V DC
Signal voltage: 0.5 - 4.5V
Current sensor:
Measuring range: -20 - 20A
Accuracy: ±2%
Measuring meth..
€4.00
Ex Tax:€3.31
Model: OS-ACS712MOD30A
A simple current sensor from Open-Smart that can measure both DC and AC current.
Specifications:
Supply voltage: 4.5 - 5.5V DC
Signal voltage: 0.5 - 4.5V
Current sensor:
Measuring range: -30 - 30A
Accuracy: ±2%
Measuring meth..
€4.00
Ex Tax:€3.31
Model: OS-ACS712MOD5A
A simple current sensor from Open-Smart that can measure both DC and AC current.
Specifications:
Supply voltage: 4.5 - 5.5V DC
Signal voltage: 1.5 - 3.5V
Current sensor:
Measuring range: -5 - 5A
Accuracy: ±2%
Measuring method: Hall effe..
€3.75
Ex Tax:€3.10
Model: PCF8591
This module has 4 analog to digital (A/D) converters, 1 digital to analog (D/A) converter and 3 built-in sensors: A light sensor, a temperature sensor and a potentiometer. The sensors are connected via the included 2P jumpers, if a built-in sensor is..
€3.50
Ex Tax:€2.89
Model: WS-17539
Brand: Waveshare
A HAT for the Raspberry Pi with which the current, voltage and therefore also the power can be measured on 4 different channels. The module also supports bi-directional current, which means that the IN+ and IN- may be reversed. The voltage is measure..
€18.00
Ex Tax:€14.88
-for-raspberry-pi-default-600x600.jpg "Waveshare Sense HAT (B) for Raspberry Pi")
Model: WS-16864
Brand: Waveshare
With this HAT you provide your Raspberry Pi with various sensors that communicate via I2C. The HAT is designed for the Raspberry Pi Zero, but also works with other models. In addition, the module can also be used with other microcontrollers such as a..
€36.50
Ex Tax:€30.17
Showing 1 to 38 of 38 (1 Pages)