Model: 0.1UF310VAC-SUPPRESSIONCAP
A suppression capacitor that can be used to filter mains voltage.
Specifications:
Capacity: 0.1uF (100nF)
Capacity tolerance: ±10%
Maximum voltage: 310V AC
Security class: X2
Capacitor type: Polypropylene (film)
Working temperature..
€0.40
Ex Tax:€0.33
Model: 0.22UF310VAC-SUPPRESSIONCAP
A suppression capacitor that can be used to filter mains voltage.
Specifications:
Capacity: 0.22uF (220nF)
Capacity tolerance: ±10%
Maximum voltage: 310V AC
Security class: X2
Capacitor type: Polypropylene (film)
Working temperatur..
€0.50
Ex Tax:€0.41
Model: 100KPOT-3296
A small potentiometer with more turns for extra precision.
Specifications:
Resistance: 100kΩ
Resistance taper: Linear
Number of channels: 1
Dimensions: 9.5 x 4.5 x 10mm..
€0.45
Ex Tax:€0.37
Model: 100KPOT-3362
A small potentiometer with one turn.
Specifications:
Resistance: 100kΩ
Resistance taper: Linear
Number of channels: 1
Dimensions: 7 x 7 x 5mm (without pins)..
€0.45
Ex Tax:€0.37
Model: RV09-100K
A single-turn linear potentiometer. The footprint is compatible with RV09 potentiometers from Taiwan Alpha and RK09K potentiometers from Alps. If you want to use this potentiometer on a breadboard, you can cut off the large pins on the side (which ar..
€0.35
Ex Tax:€0.29
Model: 100KPOTSTD
Standard single-turn potentiometer.
Specifications:
Resistance: 100kΩ
Resistance taper: Linear
Number of channels: 1
Length turning part and screw thread: 20mm
Length tread: 6.5mm
Thread type: M7x0.75mm
Pin distance: 5mm
Pac..
€0.50
Ex Tax:€0.41
Model: 100NF50VCER
The default 100nF decoupling capacitor. Wonder why you need this so often? Check out this wikipedia page.
This is a standard ceramic capacitor with a pin spacing of 5.08mm.
..
€0.10
Ex Tax:€0.08
Model: 10KPOT-3296
A small potentiometer with more turns for extra precision...
€0.45
Ex Tax:€0.37
Model: 10KPOT-3362
A small potentiometer with one turn...
€0.45
Ex Tax:€0.37
Model: 10KPOT3386P
A small potentiometer with one turn...
€0.45
Ex Tax:€0.37
Model: RK097N-B10K
A 1 channel linear potentiometer.
For a suitable potentiometer button, see this category: Knobs
Specifications:
Modelnumber: RK097N B10K
Linearpotentiometer: 10KΩ
The length of the potentiometer (turning part and screw thread) is..
€0.80
Ex Tax:€0.66
Model: 10KPOTAUDIO1CHSWITCH
A potentiometer that is very suitable for controlling the volume of audio. The potentiometer has a build-in switch (turn counterclockwise to turn the switch off).
For a suitable potentiometer knob, see this category: Knobs
Specifications:
..
€1.00
Ex Tax:€0.83
Model: 10KPOTAUDIO2CH
A potentiometer that is very suitable for controlling the volume of audio.
For a suitable potentiometer knob, see this category: Knobs
Specifications:
Resistance: 10kΩ
Maximum power: 0.05W
Resistance taper: Linear
Number of channels..
€1.00
Ex Tax:€0.83
Model: RV09-10K
A linear potentiometer of 10KΩ with one turn and handy knob.
The footprint is compatible with RV09 potentiometers from Taiwan Alpha and RK09K potentiometers from Alps.
See the images for the dimensions of this potentiometer.
If you want to use..
€0.35
Ex Tax:€0.29
Model: 10KSLIDEPOT45MM
This slide potentiometer is linear and therefore usually not suitable for audio applications.
See following page for matching potentiometer knobs: Knobs
Specifications:
Resistance: 10kΩ
Resistance taper: Linear
Number of channels..
€1.50
Ex Tax:€1.24
Model: 10KSLIDEPOT75MM
This slide potentiometer is linear and therefore usually not suitable for audio applications.
See following page for matching potentiometer knobs: Knobs
Specifications:
Resistance: 10kΩ
Resistance taper: Linear
Number of channels..
€1.75
Ex Tax:€1.45
Model: 10KSLIDEPOT88MM
This slide potentiometer is linear and therefore usually not suitable for audio applications.
See following page for matching potentiometer knobs: Knobs
Specifications:
Resistance: 10kΩ
Resistance taper: Linear
Number of channels..
€2.00
Ex Tax:€1.65
Model: 10KSLIDEPOT45MM2CH
This slide potentiometer is linear and therefore usually not suitable for audio applications.*
See following page for matching potentiometer knobs: Knobs
Specifications:
Resistance: 10kΩ
Resistance taper: Linear
Number of channels: 2
..
€1.75
Ex Tax:€1.45
Model: 10KSLIDEPOT60MM2CH
This slide potentiometer is linear and therefore usually not suitable for audio applications.
See following page for matching potentiometer knobs: Knobs
Specifications:
Resistance: 10kΩ
Resistance taper: Linear
Number of channels..
€1.75
Ex Tax:€1.45
Model: 10KSLIDEPOT75MMCH2
This slide potentiometer is linear and therefore usually not suitable for audio applications.*
See following page for matching potentiometer knobs: Knobs
Specifications:
Resistance: 10kΩ
Resistance taper: Linear
Number of channel..
€2.00
Ex Tax:€1.65
Model: 10KSLIDEPOT75MM2CHLOG
This 2-channel slide potentiometer is logarithmic and therefore suitable for audio applications.
The standard slide potentiometer buttons with a 4mm long hole are suitable for this potentiometer.
For dimensions and pinout see the images.
For an ..
€2.00
Ex Tax:€1.65
Model: 10KPOTSTD
Standard single-turn potentiometer.
Specifications:
Resistance: 10kΩ
Resistance taper: Linear
Number of channels: 1
Length turning part and screw thread: 20mm
Length tread: 6.5mm
Thread type: M7x0.75mm
Pin distance: 5mm
Pack..
€0.50
Ex Tax:€0.41
Model: 10KPOT15MM
Standard single-turn potentiometer.
See the following category for suitable knobs: Knobs, Caps and Covers..
€0.50
Ex Tax:€0.41
Model: 10KDOUBLEPOTSTD
A double potentiometer with one rotation.
This potentiometer is linear and therefore not suitable for audio applications.
The thread is approximately 6.5 mm thick.
The length of the potentiometer (turning part and screw thread) is 15 mm. The pin d..
€0.80
Ex Tax:€0.66
Model: POTTHUMBW-B103-1CH
A potentiometer with one-turn and a built-in thumbwheel.
Specifications:
Resistance: 10kΩ
Resistance taper: Linear
Number of channels: 1
Number of pins: 3
Thumbwheel diameter: 16mm
Thumbwheel thickness: 2mm
Package contents:
..
€0.50
Ex Tax:€0.41
Model: POTTHUMBW-B103-2CH
A potentiometer with one turn and a built-in thumbwheel.
Specifications:
Resistance: 10kΩ
Resistance taper: Linear
Number of channels: 2
Number of pins: 5
Thumbwheel diameter: 16mm
Thumbwheel thickness: 2mm
Package contents:
..
€0.50
Ex Tax:€0.41
Model: RESISTORSET
Specifications:
1% Metal film wire resistance
1/4 Watt
About 20 pieces per resistance value
This set contains the following values:
10Ω
22Ω
47Ω
100Ω
150Ω
200Ω
220Ω
270Ω
330Ω
470Ω
510Ω
680Ω
1KΩ
2KΩ
2.2K..
€5.00
Ex Tax:€4.13
Model: RESISTORSET2W
Specifications:
1% Metal film wire resistance
2 Watt
About 10 pieces per resistance value
This set contains the following values:
22Ω
51Ω
100Ω
1KΩ
62KΩ
82KΩ
100KΩ
120K&Omega..
€7.00
Ex Tax:€5.79
Model: 14PSOCKET
Easy to use as a spacer. E.g. if you want to put a chip on a printed circuit board and prevent the chip from overheating during soldering.
It is also useful if you know in advance that it is possible that your chip can go wrong. With an IC foot you ..
€0.35
Ex Tax:€0.29
Model: 16PSOCKETDBL
This IC foot is suitable for soldering on both sides (from top and bottom)..
€0.70
Ex Tax:€0.58
Model: 16PSOCKET
Easy to use as chip holder. For example to place a chip on a prototyping board and want to prevent overheating from soldering.
It is also useful to quickly replace the chip when the IC is broken...
€0.40
Ex Tax:€0.33
New
Model: X49SD16MSD2SC
A standard 16MHz crystal in a HC49 package. This crystal can be used with eg an ATmega328P chip. This crystal requires two 18pF, 20pF or 22pF capacitors to work...
€0.50
Ex Tax:€0.41
Model: 18PSOCKET
Easy to use as a spacer. E.g. if you want to put a chip on a printed circuit board and prevent the chip from overheating during soldering.
It is also useful if you know in advance that it is possible that your chip can go wrong. With an IC foot you ..
€0.45
Ex Tax:€0.37
Model: INDUCTORSET
Specifications:
1/4 Watt
10 units per inductor value
This set contains the following values:
1uH
10h
22h
33uH
47uH
100uH
150uH
220uH
330uH
470uH
560uH
1mH..
€4.50
Ex Tax:€3.72
Model: 0805SMDRESISTORSET
Specifications:
0805 SMD
About 50 pieces per resistance value
Tolerance: 5%
Power rating: 1/8W
This set contains the following values:
1Ω
7.5Ω
10Ω
22Ω
39Ω
47Ω
68Ω
75Ω
100Ω
130Ω
150Ω
220Ω
360Ω
470Ω
68..
€9.50
Ex Tax:€7.85
Model: FM62429
A volume controller with 2 channels in a 8-pins dip format.
An example schematic (Application Example) can be found in the datasheet of the M62429 (Compatible with the FM62429).
How to control the volume with an Ar..
€0.90
Ex Tax:€0.74
Model: 20PSOCKET
Easy to use as a spacer. E.g. if you want to put a chip on a printed circuit board and prevent the chip from overheating during soldering.
It is also useful if you know in advance that it is possible that your chip can go wrong. With an IC foot you ..
€0.50
Ex Tax:€0.41
Model: 20PSOCKETDBL
This IC foot is suitable for soldering on both sides (from top and bottom)..
€0.75
Ex Tax:€0.62
Discontinued
Model: 22PF50VCER
The standard 22pF capacitor needed in combination with a 16MHz crystal.
This is a standard ceramic capacitor with a pin distance of 2.54mm...
€0.10
Ex Tax:€0.08
Model: 24PSOCKET
Easy to use as a spacer. E.g. if you want to put a chip on a printed circuit board and prevent the chip from overheating during soldering.
It is also useful if you know in advance that it is possible that your chip can go wrong. With an IC foot you ..
€0.50
Ex Tax:€0.41
Model: 28PSOCKET
Easy to (for example) move the ATmega328P of your UNO to a soldered PCB...
€0.50
Ex Tax:€0.41
Model: 32KTC38
A 32.768kHz crystal in a cylinder shaped package (TC38) with a diameter of 3mm and a length of 8mm. This crystal is mainly used for timing purposes.
For more information see the datasheet under the tab "Downloads"...
€0.50
Ex Tax:€0.41
Model: 3MMLEDHOLMET
An LED holder for a 3mm LED.
Dimensions for mounting hole: 6mm
Instructions for mounting the LED:
Drill hole.
Insert LED into metal piece.
Insert the plastic piece through the pins of the LED and press it into the metal piece (this wi..
€0.25
Ex Tax:€0.21
Model: 3MMLEDHOLPTIC
An LED holder for a 3mm LED.
Dimensions for mounting hole: 5mm..
€0.20
Ex Tax:€0.17
Model: 4.7KΩSMD
Sold by piece.
Specifications:
5% 0805 SMD resistor
4.7KΩ
1/8 Watt..
€0.05
Ex Tax:€0.04
Model: 50KPOTAUDIOLOG2CH
A potentiometer that is very suitable for controlling the volume of audio.
For a suitable potentiometer knob, see this category: Knobs
Specifications:
Resistance: 50kΩ
Maximum power: 0.025W
Resistance taper: Logarithmic
Number of ch..
€1.00
Ex Tax:€0.83
Model: POTBOARD
A small board with a potentiometer that you can put between the audio input and the amplifier to control the volume.
There is also a cable included so you can connect the TA2024 Audio Amplifier with it. Soldering is not needed!
See the followin..
€2.50
Ex Tax:€2.07
Model: 5MMLEDHOLMET
A LED holder for a 5mm LED.
Dimensions for mounting hole: 8mm
Instructions for mounting the LED:
Drill hole.
Insert the LED into the metal piece.
Insert the plastic piece through the pins of the LED and press it into the metal piece (..
€0.35
Ex Tax:€0.29
Model: 5MMLEDHOLPTIC
An LED holder for a 5mm LED.
Dimensions for mounting hole: 7mm..
€0.25
Ex Tax:€0.21
New
Model: 5MMLEDHOLD10X
A set of LED holders for 5mm LEDs...
€0.50
Ex Tax:€0.41