Model: XYD-HEATERTHERMISTOR-P1
This heater and thermistor is suitable for the Bambu Lab P1P and P1S..
€5.75
Ex Tax:€4.75
Model: XYD-HEATERTHERMISTOR-X1
This heater and thermistor is suitable for the Bambu Lab X1 and X1C...
€2.75
Ex Tax:€2.27
Model: MK8EXTRUDER
Aluminum MK8 Bowden Extruder for 3D printers. This is an upgrade to the original plastic extruder included with most 3D printers.
Compatible with most Creality and Ender printers. For other printers check compatibility.
Is suitable for filament..
€8.00
Ex Tax:€6.61
Model: HOTENDVOLCANOV612V-1.75MM
Complete hotend with fans for a 3D printer. The hotend is well suited for high speed printing due to the longer melting zone. Keep in mind that this also creates more stringing than with a standard V6 hotend.
Specifications:
Suitable filamen..
€31.00
Ex Tax:€25.62
Discontinued
Model: HOTENDVOLCANOV624V-1.75MM
Complete hotend with fans for a 3D printer. The hotend is well suited for high speed printing due to the longer melting zone. Keep in mind that this also creates more stringing than with a standard V6 hotend.
Specifications:
Suitable filamen..
€31.00
Ex Tax:€25.62
Model: DDGEXTRUDER-E3D-BTCOMP
Dual Drive Gear Extruder for 3D printers. This is an upgrade to the original plastic extruder included with most 3D printers. This extruder has a double drive for trouble-free material feeding, so that the filament will no longer slip. In addition, i..
€16.00
Ex Tax:€13.22
Model: HC12V40W1M
Heating element for 3D printers. This concerns a 12V/40W heater cartridge.
Specifications:
Voltage: 12V
Wattage: 40W
Cable length: 1 meter
Cartridge length: 20mm
Cartridge diameter: 6mm..
€2.50
Ex Tax:€2.07
Model: HC24V40W1M
Heating element for 3D printers. Concerns a 24V/40W heater cartridge.
Specifications:
Voltage: 24V
Wattage: 40W
Cable length: 1 meter
Cartridge length: 20mm
Cartridge diameter: 6mm..
€2.50
Ex Tax:€2.07
Model: 1.75MK8-12VBOWDEN
Complete hotend for a 3D printer. The hotend is a good replacement for a CR-10, among others...
€10.00
Ex Tax:€8.26
Discontinued
Model: 1.75MK8-24VBOWDEN
Complete hotend for a 3D printer. The hotend is a good replacement for an Ender 3 (pro), Ender 5, etc...
€10.00
Ex Tax:€8.26
Model: V5-HOTEND-1.75
Complete hotend for a 3D printer. The hotend is a good replacement for the hotend on an Anycubic i3 Mega.
Note: This hotend is delivered assembled, but the nozzle must still be tightened when the hotend is heated to prevent leaks...
€10.00
Ex Tax:€8.26
Model: EXTRBOWV6-1.75MM
Complete hotend with bowden tube for a 3D-printer. This hotend is suitable for 1.75mm filament.
Specifications:
Heater cartridge:
Supply voltage: 12V DC
Maximal current: 2.5A
Thermistor: NTC 3950 100kΩ
Nozzle:
Materi..
€10.00
Ex Tax:€8.26
Model: EXTRDIRV6-1.75MM
Complete direct drive hotend for a 3D-printer. This hotend is suitable for 1.75mm filament.
Specifications:
Heater cartridge:
Supply voltage: 12V DC
Maximal current: 2.5A
Thermistor: NTC 3950 100kΩ
Nozzle:
Material: ..
€10.00
Ex Tax:€8.26
Model: LDO-ORBITER-V2.0
This lightweight extruder is ideal for a direct drive setup. Because of the planetery gearbox, despite the small Nema 14 pancake stepper motor, it is a powerful extruder. The Orbiter 2.0 is lighter, more powerful and more compact than the Orbiter 1.5..
€62.00
Ex Tax:€51.24
Model: NTC100KCABLE
A default NTC of 100K(1% accuracy) sealed in glas and connected with a 100cm cable. This NTC is suited to operate for 3D printers.
The end of the cables are loose cables to connect the NTC to the desired controller.
Specifications:
Resistor..
€1.50
Ex Tax:€1.24
Model: NTC100KCARTRIDGE
This is a temperature thermistor cartridge for 3D printer hotends. This sensor is compatible with some E3D/clone E3D hotend blocks.
Check whether your hotend block is compatible with this cartridge. You cannot use this cartridge with a hot end block..
€3.00
Ex Tax:€2.48
Model: LDO-ORBITER-V1.5
This lightweight extruder is ideal for a direct drive setup. Due to the planetery gearbox, it is a powerful extruder despite the small Nema 14 pancake stepper motor.
Specifications:
Stepper motor:
Maximum RMS current per phase: 0.85A
..
€46.00
Ex Tax:€38.02
Model: ORBITER-V2.0
This lightweight extruder is ideal for a direct drive setup. Because of the planetery gearbox, despite the small Nema 14 pancake stepper motor, it is a powerful extruder. The Orbiter 2.0 is lighter, more powerful and more compact than the Orbiter 1.5..
€55.00
Ex Tax:€45.45
Model: PC4-01
A standard PC4 coupling, for a 4mm PTFE tube. This coupling has no through-feed, so the PTFE tube cannot pass through it.
Specifications:
Model: PC4-01
Thread: 1/8NPT x 6mm
Suitable PTFE tube outer diameter: 4mm
Package contents:
..
€1.00
Ex Tax:€0.83
Model: PC4-01T
A standard PC4 coupling, for a 4mm PTFE tube. This coupling has a feedthrough, so the PTFE tube can go through it.
Specifications:
Model: PC4-01
Thread: 1/8NPT x 6mm
Suitable PTFE tube outer diameter: 4mm
Package contents:
1x ..
€1.00
Ex Tax:€0.83
Model: PC4-M6
A standard PC4 coupling, for a 4mm PTFE tube. This coupling has no throughput, so the PTFE tube cannot pass through it.
Specifications:
Model: PC4-M6
Thread: M6 x 5mm
Suitable PTFE tube outer diameter: 4mm
Suitable filament diameter: 1..
€1.00
Ex Tax:€0.83
Model: NLRDMK82401
Complete hotend for a 3D printer. The hotend is a good replacement for an Ender 3 (pro), Ender 5, etc...
€12.50
Ex Tax:€10.33
Model: SILCOVERMK8
Silicone sock for an MK8 hotend.
The sock ensures better heat insulation of the heating element and ensures that excessive filament does not stick to the heater block as quickly...
€1.75
Ex Tax:€1.45
Model: TZ3.0-HOTEND
This TZ 3.0 hotend can be used with a Bambu Lab X1 and P1 printers, and has interchangeable nozzles. Also, the construction of this hotend is a lot sturdier, making it less likely to break down.
Depending on your printer, there are different model..
€39.50
Ex Tax:€32.64
-0.4mm-600x600.jpg "TZ-A1 Hotend for Bambu Lab A1 (Mini)")
Model: TZ-A1-HOTEND-0.4
This TZ-A1 hotend can be used with a Bambu Lab A1 (mini) printer, and has interchangeable nozzles. This hotend allows you to use cheaper nozzles, and not have to replace an entire hotend if your nozzle is clogged.
You can find the nozzles here: TZ..
€16.00
Ex Tax:€13.22
Showing 1 to 25 of 25 (1 Pages)