Model: I2C0.49OLEDWHITE
A 0.49 inch I2C OLED display with 64*32 white pixels and very good viewing angles of at least 160 degrees...
€6.75
Ex Tax:€5.58
Model: I2C0.91OLEDBLUE
A 0.91 inch I2C OLED display with 128*32 blue pixels and very good viewing angles of at least 160 degrees.
See the following page for a library for the Arduino IDE: Adafruit SSD1306..
€6.50
Ex Tax:€5.37
Model: I2C0.91OLEDWHITE
A 0.91 inch I2C OLED display with 128*32 white pixels and very good viewing angles of at least 160 degrees.
See the following page for a library for the Arduino IDE: Adafruit SSD1306..
€6.50
Ex Tax:€5.37
Model: ZJY-096-IPS-TFT-8P-ST7735
A small IPS-TFT display based on the ST7735S driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library. Use the following line of code to initialize the..
€6.00
Ex Tax:€4.96
Model: I2C0.96OLEDBLUE
A 0.96 inch I2C OLED display with 128*64 blue pixels and very good viewing angles of at least 160 degrees.
See the following pages for libraries for the Arduino IDE:
Adafruit SSD1306
u8g2..
€7.00
Ex Tax:€5.79
Model: 0.96OLEDBLUE
A 0.96 inch OLED display of 128*64 blue pixels and very good viewing angles of at least 160 degrees.
To connect the display you can follow the Adafruit manual for the majority.
The required library and manual can be found here...
€7.00
Ex Tax:€5.79
Model: I2C0.96OLEDBLUEYEL
A 0.96 inch I2C OLED display with 128*64 blue and yellow pixels and very good viewing angles of at least 160 degrees.
See the following pages for libraries for the Arduino IDE:
Adafruit SSD1306
u8g2..
€7.00
Ex Tax:€5.79
Model: I2C0.96OLEDWHITE
A 0.96 inch I2C OLED display with 128*64 white pixels and very good viewing angles of at least 160 degrees.
See the following pages for libraries for the Arduino IDE:
Adafruit SSD1306
u8g2..
€7.00
Ex Tax:€5.79
Model: 0.96OLEDWHITE
A 0.96 inch OLED display of 128*64 white pixels and very good viewing angles of at least 160 degrees.
To connect the display you can follow the Adafruit manual for the majority.
The required library and manual can be found here...
€7.00
Ex Tax:€5.79
Model: ZJY105S0800TG01-GC9A01
A IPS-TFT display based on the GC9A01 driver.
Instructions display:
To get the display working you can use the Adafruit-GC9A01A library. This library works with the Adafruit-GFX-Library...
€7.00
Ex Tax:€5.79
Model: ZJY-114-IPS-LCD-8P-ST7789V
A IPS-TFT display based on the ST7789V driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library...
€6.00
Ex Tax:€4.96
Model: ZJY-IPS128-8P-GC9A01
A round IPS-TFT display based on the GC9A01 driver.
Instructions display:
To get the display working you can use the Adafruit-GC9A01A library. This library works with the Adafruit-GFX-Library...
€7.00
Ex Tax:€5.79
Model: ZJY130S0800TG01-ST7789
A IPS-TFT display based on the ST7789 driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library...
€6.50
Ex Tax:€5.37
Model: I2C1.3OLEDBLUE
A 1.3 inch I2C OLED display with 128*64 blue pixels and very good viewing angles of at least 160 degrees.
To get the display working you can use the olikraus U8G2 library. This can also be installed via the Arduino IDE. Search for "U8G2" at Manag..
€8.00
Ex Tax:€6.61
Model: I2C1.3OLEDWHITE
A 1.3 inch I2C OLED display with 128*64 white pixels and very good viewing angles of at least 160 degrees.
Pin
Description
GND
Ground/min/earth
VCC
3.3V or 5V power supply
SCL
I2C SCL..
€8.00
Ex Tax:€6.61
Model: ZJY-TFT144-ST7735
A small TFT display based on the ST7735S driver. This version of the display works at 3.3V.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library. This library m..
€6.00
Ex Tax:€4.96
Model: ZJY-TFT144-5V-ST7735
A small TFT display based on the ST7735S driver. This version of the display works at 5V.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library. This library may..
€6.50
Ex Tax:€5.37
Model: ZJY147S10Z0TG01
A IPS display based on the ST7789V3 driver. The module also contains another chip (GT30L32) (and associated pins) that provides the display with additional fonts, but we have no additional information about this.
Instructions display:
To get the ..
€7.50
Ex Tax:€6.20
Model: ZJY-IPS-1.54
An IPS-TFT display based on the ST7789V driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library...
€7.25
Ex Tax:€5.99
Model: ZJY169S10Z0TG01-ST7789V2
A IPS-TFT display based on the ST7789V2 driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library...
€7.50
Ex Tax:€6.20
Model: ZJY169S0800TG01
A IPS-TFT display based on the ST7789V2 driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library. This library may need to be installed separately...
€7.50
Ex Tax:€6.20
Model: ZJY180-TV2.0
A TFT display with resistive touchscreen based on the ST7735S driver.
Instructions display and touchscreen:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library.
For the touchscreen..
€7.75
Ex Tax:€6.41
Model: ZJY190S0800TG01-ST7789V2
A IPS-TFT display based on the ST7789V2 driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library...
€7.00
Ex Tax:€5.79
Model: ZJY200S10Z0TG01-ST7789V2
An IPS-TFT display based on the ST7789V2 driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library...
€8.50
Ex Tax:€7.02
Model: ZJY-2.08OLEDBLUE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: U8G2 Library
In the examples there are many possible drivers, however th..
€12.50
Ex Tax:€10.33
Model: ZJY-2.08OLEDWHITE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: U8G2 Library
In the examples there are many possible drivers, however th..
€12.00
Ex Tax:€9.92
Model: 2.2TFT176x220
A 2.2-inch TFT display with 176*220 (RGB) pixels that can be placed directly on an Arduino Mega or Uno (see pictures)
The required library can be found here under the tab "Downloads". This is an older library of the UTFT library that still has suppo..
€8.00
Ex Tax:€6.61
Model: 2.2TFT240x320
A 2.2 inch TFT display.
Pin description for SD card and SPI flash pins:
SD_CS: Chip select signal (for SD card)
SD_MOSI: SPI MOSI signal (for SD card and SPI flash chip)
SD_MISO: SPI MISO signal (for SD card and SPI flash chip)
SD_SCK:..
€11.00
Ex Tax:€9.09
Model: ZJY-2.23OLEDBLUE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€12.00
Ex Tax:€9.92
Model: ZJY-2.23OLEDGREEN
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€11.50
Ex Tax:€9.50
Model: ZJY-2.23OLEDORANGE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€10.50
Ex Tax:€8.68
Model: ZJY-2.23OLEDWHITE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€13.50
Ex Tax:€11.16
Model: ZJY-2.23OLEDYELLOW
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€11.50
Ex Tax:€9.50
Model: ZJY-TFT240-11P-TOUCH-ILI9341
A TFT display with resistive touchscreen based on the ILI9341 driver.
Instructions display and touchscreen:
To get the display working you can use the Adafruit_ILI9341 library. This library works with the Adafruit-GFX-Library.
For the touchscree..
€9.50
Ex Tax:€7.85
Model: ZJY-2.42OLEDBLUE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€15.50
Ex Tax:€12.81
Model: ZJY-2.42OLEDGREEN
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€13.00
Ex Tax:€10.74
Model: ZJY-2.42OLEDWHITE
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€15.50
Ex Tax:€12.81
Model: ZJY-2.42OLEDYELLOW
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by defaul..
€13.00
Ex Tax:€10.74
Model: ZJY-TFT280-11P-TOUCH-ILI9341
A TFT display with resistive touchscreen based on the ILI9341 driver.
Instructions display and touchscreen:
To get the display working you can use the Adafruit_ILI9341 library. This library works with the Adafruit-GFX-Library.
For the touchscree..
€11.00
Ex Tax:€9.09
Model: ZJY-E-PAPER-2.9-BWR
This E-Paper display can easily be controlled with e.g. an ESP32 microcontroller.
You can use the following Library for this display: Adafruit_EPD
The example code ThinkInk_tricolor has an example for a 2.9" screen with SSD1680 chip, you can us..
€12.00
Ex Tax:€9.92
Model: ZJY312I0500WG11-SSD1362
A OLED display based on the SSD1362 driver. The display has a resolution of 256*64 pixels.
To get the display working you can use the U8g2 library...
€17.50
Ex Tax:€14.46
Model: 3.5TFT320X480ILI9486
This display can be mounted on an Arduino Mega or Due. It has a fairly high resolution of 320*480 pixels and is also quite large with 3.5 inch LCD size.
The display is already equipped with level converters and therefore ready to use on an Arduino M..
€14.00
Ex Tax:€11.57
Model: 3.5TFT320X480TOUCHRPI
This display can be mounted directly on a Raspberry Pi 1, 2, 3 or 4, but requires additional installation of drivers. The display has a resolution of 320*480 pixels and is 3.5 inches diagonally. A resistive touchscreen is mounted on top of the displa..
€15.00
Ex Tax:€12.40
Model: ZJY350S110TTG11-ILI9488
A TFT display with resistive touchscreen.
Instructions display and touchscreen:
To get the display working you can use the TFT_eSPI library. For the touchscreen functionality the XPT2046_Touchscreen library can be used.
To use the TFT_eSPI lib..
€13.00
Ex Tax:€10.74
Model: ZJY-TFT400-11P-TOUCH-ILI9488
A TFT display with resistive touchscreen based on the ILI9488 driver.
Instructions display and touchscreen:
To get the display working you can use the TFT_eSPI library. For the touchscreen functionality the XPT2046_Touchscreen library can be used..
€20.00
Ex Tax:€16.53
Model: ZJY-TFT400-11P-TOUCH-ST7796
A TFT display with resistive touchscreen based on the ST7796S driver.
Instructions display and touchscreen:
To get the display working you can use the Adafruit_ST7796S_kbv library. This library works with the Adafruit-GFX-Library.
For the touchs..
€19.50
Ex Tax:€16.12
Model: 5LCD800X480TOUCHRPI
This display can be mounted on a Raspberry Pi 1, 2, 3 or 4 via an HDMI connector, but requires additional driver installation.
The display has a resolution of 800*480 pixels and is diagonally 5 inches. On top of the display is a resistive touchscree..
€34.50
Ex Tax:€28.51
2-4 Weeks
Model: 7LCD1024X600TOUCHRPI
This display can be connected to a Raspberry Pi 1, 2, 3 of 4 via an HDMI cable, but requires additional installation of drivers.
We have only tested the display in combination with a Raspberry Pi 3B with the Raspbian operating system accordin..
€55.00
Ex Tax:€45.45
Model: AZ-107SS7-07SC
A mechanical 7-segment display from Alfa-Zeta. This display consists of 7 mechanical segments with a black and a white side. These segments can be switched very quickly using built-in electromagnets to display different characters. Each coil can be c..
€13.00
Ex Tax:€10.74
Model: ASX00039
This display shield can be used to easilly expand the Arduino GIGA Wi-Fi R1 with a graphical interface.This module has a 3.97-inch TFT display with capacitive touchscreen. Other features of the display shield include a built-in microphone, RGB LED an..
€73.00
Ex Tax:€60.33