Menu
Your Cart

Displays - page 3

Model: NX4832T035_011R-IM150918001
Complete HMI display with touchscreen. This screen can be controlled serially via a UART input. The graphical interface of this module can also be programmed via an SD card. Determine how the screen looks and program the interface with the touchsc..
€41.50
Ex Tax:€34.30
Model: NX4827T043_011R
Complete HMI display with touchscreen. This screen can be controlled serially via a UART input. The graphical interface of this module can also be programmed via an SD card. Determine how the screen looks and program the interface with the touchsc..
€62.00
Ex Tax:€51.24
Model: NX1060P101_011C-I
Note: The length of the pixels on the long side (1024 pixels) are 1.042x longer compared to the short side (600 pixels). This can cause images to look stretched or pressed. There is currently no compensation for this problem in the software and so th..
€160.00
Ex Tax:€132.23
Model: NX1060P101_011R-I
Note: The length of the pixels on the long side (1024 pixels) are 1.042x longer compared to the short side (600 pixels). This can cause images to look stretched or pressed. There is currently no compensation for this problem in the software and so th..
€144.25
Ex Tax:€119.21
Model: NX8048P070-011C
Note: The length of the pixels on the long side (800 pixels) are 1.076x longer compared to the short side (480 pixels). This can cause images to look stretched or pressed. There is currently no compensation for this problem in the software and so the..
€98.50
Ex Tax:€81.41
Model: NX8048P070-011C-Y_CASE
Note: The length of the pixels on the long side (800 pixels) are 1.076x longer compared to the short side (480 pixels). This can cause images to look stretched or pressed. There is currently no compensation for this problem in the software and s..
€110.00
Ex Tax:€90.91
Model: NX8048P070-011R
Note: The length of the pixels on the long side (800 pixels) are 1.076x longer compared to the short side (480 pixels). This can cause images to look stretched or pressed. There is currently no compensation for this problem in the software and so the..
€84.25
Ex Tax:€69.63
Model: NX8048P070-011R-Y_CASE
Note: The length of the pixels on the long side (800 pixels) are 1.076x longer compared to the short side (480 pixels). This can cause images to look stretched or pressed. There is currently no compensation for this problem in the software and so the..
€104.00
Ex Tax:€85.95
Model: NXIOADAPTER
This IO adapter gives you the possibility to easily access the GPIO pins on your Nextion display. Note: This IO adapter can only be used with Nextion Enhanced and Intelligent displays...
€3.50
Ex Tax:€2.89
Model: NX8048T070_011R
Complete HMI display with touchscreen. This screen can be controlled serially via a UART input. The graphical interface of this module can also be programmed via an SD card. Determine how the screen looks and program the interface with the touchsc..
€58.00
Ex Tax:€47.93
Model: 5110LCDRED
A 84*84 pixels LCD display. For more information see: Nokia 5110/3310 Monochrome LCD Pay attention to the pin-out as shown in the picture! (order from left to right can vary in manuals!) The name/function of the pins is shown on the product...
€4.00
Ex Tax:€3.31
Model: OPIPM Brand: Orange Pi
The Orange Pi Portable Monitor is connected via HDMI or USB-C to a telephone or a (game) computer (such as an Orange Pi, Windows computer, Playstation or the Switch). Note: No power adapter is included...
€93.00
Ex Tax:€76.86
Model: RAK-110021
The RAK14000 as an E-ink display module from RAKwireless for the modular WisBlock platform. The module comes with an 2.13 inch E-ink display and a membrane keypad with 3 buttons...
€20.00
Ex Tax:€16.53
Model: RAK-110024
The RAK14000 as an E-ink display module from RAKwireless for the modular WisBlock platform. The module comes with an 2.13 inch E-ink display and a membrane keypad with 3 buttons...
€18.00
Ex Tax:€14.88
Model: RAK-110004
The is a display module from RAKwireless for the modular WisBlock platform. Note: Unlike most other RAKwireless products, this module still needs to be soldered (the pins in the picture are not pre-soldered, but are included)...
€7.00
Ex Tax:€5.79
Model: RAMPS1.4LCD12864
This LCD screen can be used in combination with the RAMPS 1.4 board and has a 128*64 pixels LCD screen, buttons, rotary encoder, a buzzer and an SD card reader. A Cable and RAMPS 1.4 adapter are included with this board...
€9.50
Ex Tax:€7.85
Model: RAMPS1.4LCD20X4
This LCD screen can be used in combination with the RAMPS 1.4 board and has a 20*4 characters LCD screen, buttons, rotary encoder, a buzzer and an SD card reader. A Cable and RAMPS 1.4 adapter are included with this board...
€7.00
Ex Tax:€5.79
Model: SEEED-104020132
A segment display module from Seeed Studio. With the built-in Grove connection and supplied Grove cable, the module can easily be connected to the microcontroller boards from Seeed Studio or other microcontrollers with Grove connectors. Specificat..
€8.50
Ex Tax:€7.02
Model: SEEED-104020133
A segment display module from Seeed Studio. With the built-in Grove connection and supplied Grove cable, the module can easily be connected to the microcontroller boards from Seeed Studio or other microcontrollers with Grove connectors. Specificat..
€13.25
Ex Tax:€10.95
Model: SEEED-104030001
An LCD display from Seeed Studio with a unique RGB backlight. The characters are printed on the screen in black. With the built-in Grove connection and supplied Grove cable, the module can easily be connected to the microcontroller boards from Seeed ..
€18.75
Ex Tax:€15.50
Model: SEEED-104020248
A module with an OLED display from Seeed Studio. With the built-in Grove connection and included Grove cable, the module can easily be connected to the microcontroller boards from Seeed Studio. See the following page for more information: Seeed St..
€8.00
Ex Tax:€6.61
Model: SEEED-104020249
A module with an OLED display from Seeed Studio. With the built-in Grove connection and included Grove cable, the module can easily be connected to the microcontroller boards from Seeed Studio...
€8.00
Ex Tax:€6.61
Model: SEEED-104020208
A module with a 0.96 inch OLED display (SSD1315 driver) with white text from Seeed Studio. For more information, see the following page: Grove - OLED Display 0.96" (SSD1315)..
€9.00
Ex Tax:€7.44
Model: SEEED-104020250
A module with an OLED display from Seeed Studio. With the built-in Grove connection and included Grove cable, the module can easily be connected to the microcontroller boards from Seeed Studio...
€16.00
Ex Tax:€13.22
Model: SEEED-104030087
An expansion module with numerous features for the XIAO series (or other development board with the same pin layout) from Seeed Studio. Note: The battery for the RTC is not charged when the module is powered. Note: No XIAO is included...
€24.00
Ex Tax:€19.83
Model: SEGMENT1_0.56
Segment displays are often used in clocks or for indicating numbers in general, eg. to display a voltage. This variant is fairly minimal with only 1 character, but for many applications 1 digit/letter is enough to indicate a status. Here red LE..
€0.75
Ex Tax:€0.62
Model: SEGMENT4DP0.56
Segment displays are often used in clocks or for indicating numbers in general, eg. to display a voltage. This variant is has a colon in the middle. The colon is often used to display counting seconds. (on-off-on-off etc.) The same rules apply ..
€1.50
Ex Tax:€1.24
Model: TM1637-RED4MINI
A ready-to-use segment display that is controlled by a TM1637 LED Driver. This allows you to easily control the segment display using only two pins on your Arduino (instead of 12 pins for 4 characters) For more information on how to use this TM16..
€2.50
Ex Tax:€2.07
Model: MAX7219RED8DEC
A segment display that is controlled by a MAX7219 LED Driver. This allows you to easily control the segment display using only three pins on your Arduino (instead of 16 pins for 8 characters) Specifications: Voltage: 3.3-5V (power and signa..
€3.50
Ex Tax:€2.89
Model: SEGMENT4_0.36
Segment displays are often used in clocks or for indicating numbers in general, eg to display a voltage. This variant is also provided with a colon in the middle. The colon is often used to display counting seconds. (on-off-on-off etc.) Here re..
€1.25
Ex Tax:€1.03
Model: TM1638MOD
An TM1638 LED 8 segment display with 8 LEDs and 8 buttons. The pinout is indicated on the board. Specifications: Voltage(power and signal): 5V DC For more examples: TM1638 with an Arduino and this GitHub library..
€4.00
Ex Tax:€3.31
Model: SH-LCD
A display module that can be used as a shield for the TinyPICO, TinyS2, TinyS3, TinyC6 and ProS3...
€11.00
Ex Tax:€9.09
Model: WS-10507 Brand: Waveshare
With this display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed. See the following page for more information: 0.95 inch SPI RGB OLED (A) Display Module..
€12.00
Ex Tax:€9.92
Model: WS-10514 Brand: Waveshare
With this display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed. See the following page for more information: 0.95 inch SPI RGB OLED (B) Display Module..
€12.00
Ex Tax:€9.92
Model: WS-15868 Brand: Waveshare
With this display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed. See the following page for more information: 0.96 inch SPI IPS-TFT-LCD Display Module..
€7.50
Ex Tax:€6.20
Model: WS-19653 Brand: Waveshare
This 0.96 inch Waveshare display HAT is connected via the SPI interface of Raspberry Pi. The HAT has an integrated joystick and two push buttons. Note: No Raspberry Pi Pico is included...
€7.50
Ex Tax:€6.20
Model: WS-18231 Brand: Waveshare
With this display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed. See the following page for more information: 1.14 inch SPI IPS-TFT-LCD Display Module..
€8.50
Ex Tax:€7.02
Waveshare 1.14 inch SPI IPS-TFT-LCD Display 240*135 pixels - for Raspberry Pi Pico
2-4 Weeks
Model: WS-19340 Brand: Waveshare
This 1.14 inch Waveshare display HAT is connected via the SPI interface of Raspberry Pi. The HAT has an integrated joystick and two push buttons. Note: No Raspberry Pi Pico is included...
€8.50
Ex Tax:€7.02
Model: WS-19192 Brand: Waveshare
With this round display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed. See the following page for more information: 1.28 inch Round SPI IPS-TFT-LCD Display Module..
€14.00
Ex Tax:€11.57
Model: WS-15867 Brand: Waveshare
With this display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed. Specifications: Supply voltage: 3.3V DC Signal voltage: 3.3V Display: Display diagonal: 1.3 inch Resolution..
€9.50
Ex Tax:€7.85
Model: WS-19650 Brand: Waveshare
This 1.3 inch Waveshare display HAT is connected via the SPI interface of Raspberry Pi Pico. The HAT has an integrated joystick and four tactile push buttons. Note: No Raspberry Pi Pico is included...
€8.50
Ex Tax:€7.02
Model: WS-14972 Brand: Waveshare
This 1.3 inch Waveshare display is connected via the SPI interface of Raspberry Pi. The HAT has an integrated joystick and three tactile push buttons For more information, see the following page: 1.3 inch LCD HAT..
€14.50
Ex Tax:€11.98
Showing 101 to 150 of 240 (5 Pages)
1
false
true
true
Remove
Change
tr