Nextion Intelligent NX4827P043 HMI IPS Display 4.3 Inch 480x272 with Capacitive Touchscreen

Availability: Directly available from warehouse in Eindhoven
SKU: 006521

Based on 0 review(s) - Write a review

€56.50

Ex Tax: €46.69

10 or more €56.00

20 or more €55.50

50 or more €55.00

100 or more €54.50

200 or more €54.00

Qty

Add to Cart

Add to wishlist

20+ pieces in stock

Description
Reviews

Complete HMI display with touchscreen. This display can be controlled serially via a UART port and also has GPIO outputs that can be controlled via the Nextion software. The graphical interface of this module can be programmed via an SD card or via the UART connection. Determine yourself how the display looks and program the interface with the touchscreen yourself.

The Nextion Intelligent displays have a number of advantages over the enhanced Nextion screens:

More powerful hardware in terms of MCU, flash storage and SRAM
Options to play audio, video and animation
Supports more advanced software features and functions such as transparent components, loading effects, drag and drop functionalities etc.

See the following page for more information: GitHub

Note: It is important that you use a good quality power supply, the display will get damaged quickly if the power supply provides a too low voltage.

Please login or register to review

Reviews Over Nextion Intelligent NX4827P043 HMI IPS Display 4.3 Inch 480x272 with Capacitive Touchscreen

Average Rating:

This product has 0 review(s) in total.

Tags: Nextion Intelligent NX4827P043 HMI IPS Display 4.3 Inch 480x272 with Capacitive Touchscreen , NX4827P043_011C-IPS , Nextion

Specifications

General
Brand	Nextion
Manufacturer model/SKU	NX4827P043_011C-IPS
Minimum operating humidity [%R.H.]	10
Maximum operating humidity [%R.H.]	90
Minimum operating temperature [°C]	-20
Maximum operating temperature [°C]	70
Features	Display Microcontroller Touchscreen SD-card adapter Battery holder Audio amplifier RTC
General physical appearance
Main color	Red
Weight [g]	103
Dimension X [mm]	120
Dimension Y [mm]	74
Mounting options	Mounting hole(s)
Diameter mounting hole(s) [mm]	3.2
Form factor	Module (general)
General electrical properties
Minimum supply voltage [V DC]	4.7
Maximum supply voltage [V DC]	6.5
Minimum recommended supply current [A]	1.0
Minimum IO-pin input voltage [V]	3
Maximum IO-pin input voltage [V]	6.5
IO-pin output voltage [V]	Equal to supply voltage
Maximum IO-pin source current [mA]	1
Maximum IO-pin sink current [mA]	1
Internal memory
SRAM [KB]	512
Flash memory [MB]	120
EEPROM [B]	1024
EEPROM type	Built-in
Communication
Hardware interface(s)	UART PWM GPIO
Number of IO-pins	8
Maximum available hardware PWM channels	2
Default baudrate	9600
Supported SD card size	Micro SD
Supported SD File Format	FAT32
Maximum supported SD capacity [GB]	32
Display
Type	IPS
Screen diagonal [inch]	4.3
Number of pixels long side	480
Number of pixels short side	272
Display shape	Rectangular
Pixel colors	RGB
Touchscreen
Touch type	Capacitive
Multi-touch support	Yes
RTC
Back-up battery/capacitor	Optional
Audio amplifier
Amplifier chip	NS8002
Number of (normal) channels	1
Maximum power per (normal) channel [W]	1.5
Minimum speaker impedance per (normal) channel [Ω]	3
Maximum speaker impedance per (normal) channel [Ω]	8
Battery holder
Suitable battery form factor	Button cell 1220
Suitable number of batteries	1
Connectors
Power supply connector(s)	JST-XH (compatible) male
IO-connector(s)	JST-XH (compatible) male
Speaker connector(s)	Molex Picoblade (compatible) male
Package contents
Package contents	1x Display module 1x Micro USB to pin header adapter 1x JST-XH 4p to DuPont cable

Product FAQ

Can I power the device with an Arduino or other development board?

This is not possible in most cases. Most development boards (including Uno, Mega, NodeMCU, D1 Mini V3, etc.) have a diode between the 5V pin and the USB input that lowers the voltage. If the voltage from the 5V pin is lower than the required minimum of the device (see specifications) then it cannot function properly. In addition, many development boards can only provide little power. This can also cause it to malfunction. Using an insufficient power supply can even damage the device. Therefore, make sure that you use a suitable power supply and that it is connected correctly. It is advised to verify the supply voltage by measuring it.

The HMI is not functioning properly. What causes this?

In most cases, this is caused by insufficient power supply condition. Nextion HMIs require a good quality power supply. When the power supply provides too little current, has too low a voltage and/or generates too much ripple, several problems can arise, such as:

Flashing
Blurred screen
Freeze
Damage to the HMI

A good quality CE-approved power supply is required that can supply enough current and has the correct voltage. If necessary, measure the voltage directly on the Vcc and GND pins of the HMI.