Model: ZJY-096-IPS-TFT-8P-ST7735
A small IPS-TFT display based on the ST7735S driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library. Use the following line of code to initialize the..
€6.00
Ex Tax:€4.96
Model: ZJY105S0800TG01-GC9A01
A IPS-TFT display based on the GC9A01 driver.
Instructions display:
To get the display working you can use the Adafruit-GC9A01A library. This library works with the Adafruit-GFX-Library...
€7.00
Ex Tax:€5.79
Model: ZJY-114-IPS-LCD-8P-ST7789V
A IPS-TFT display based on the ST7789V driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library...
€6.00
Ex Tax:€4.96
Model: ZJY-IPS128-8P-GC9A01
A round IPS-TFT display based on the GC9A01 driver.
Instructions display:
To get the display working you can use the Adafruit-GC9A01A library. This library works with the Adafruit-GFX-Library...
€7.00
Ex Tax:€5.79
Model: ZJY130S0800TG01-ST7789
A IPS-TFT display based on the ST7789 driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library...
€6.50
Ex Tax:€5.37
Model: ZJY-TFT144-ST7735
A small TFT display based on the ST7735S driver. This version of the display works at 3.3V.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library. This library m..
€6.00
Ex Tax:€4.96
Model: ZJY-TFT144-5V-ST7735
A small TFT display based on the ST7735S driver. This version of the display works at 5V.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library. This library may..
€6.50
Ex Tax:€5.37
Model: ZJY147S10Z0TG01
A IPS display based on the ST7789V3 driver. The module also contains another chip (GT30L32) (and associated pins) that provides the display with additional fonts, but we have no additional information about this.
Instructions display:
To get the ..
€7.50
Ex Tax:€6.20
Model: ZJY-IPS-1.54
An IPS-TFT display based on the ST7789V driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library...
€7.25
Ex Tax:€5.99
Model: ZJY169S10Z0TG01-ST7789V2
A IPS-TFT display based on the ST7789V2 driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library...
€7.50
Ex Tax:€6.20
Model: ZJY169S0800TG01
A IPS-TFT display based on the ST7789V2 driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library. This library may need to be installed separately...
€7.50
Ex Tax:€6.20
Model: ZJY180-TV2.0
A TFT display with resistive touchscreen based on the ST7735S driver.
Instructions display and touchscreen:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library.
For the touchscreen..
€7.75
Ex Tax:€6.41
Model: ZJY190S0800TG01-ST7789V2
A IPS-TFT display based on the ST7789V2 driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library...
€7.00
Ex Tax:€5.79
Model: ZJY200S10Z0TG01-ST7789V2
An IPS-TFT display based on the ST7789V2 driver.
Instructions display:
To get the display working you can use the Adafruit-ST7735-Library. This library works with the Adafruit-GFX-Library...
€8.50
Ex Tax:€7.02
Model: 2.2TFT176x220
A 2.2-inch TFT display with 176*220 (RGB) pixels that can be placed directly on an Arduino Mega or Uno (see pictures)
The required library can be found here under the tab "Downloads". This is an older library of the UTFT library that still has suppo..
€8.00
Ex Tax:€6.61
Model: 2.2TFT240x320
A 2.2 inch TFT display.
Pin description for SD card and SPI flash pins:
SD_CS: Chip select signal (for SD card)
SD_MOSI: SPI MOSI signal (for SD card and SPI flash chip)
SD_MISO: SPI MISO signal (for SD card and SPI flash chip)
SD_SCK:..
€11.00
Ex Tax:€9.09
Model: ZJY-TFT240-11P-TOUCH-ILI9341
A TFT display with resistive touchscreen based on the ILI9341 driver.
Instructions display and touchscreen:
To get the display working you can use the Adafruit_ILI9341 library. This library works with the Adafruit-GFX-Library.
For the touchscree..
€9.50
Ex Tax:€7.85
Model: ZJY-TFT280-11P-TOUCH-ILI9341
A TFT display with resistive touchscreen based on the ILI9341 driver.
Instructions display and touchscreen:
To get the display working you can use the Adafruit_ILI9341 library. This library works with the Adafruit-GFX-Library.
For the touchscree..
€11.00
Ex Tax:€9.09
Model: 3.5TFT320X480ILI9486
This display can be mounted on an Arduino Mega or Due. It has a fairly high resolution of 320*480 pixels and is also quite large with 3.5 inch LCD size.
The display is already equipped with level converters and therefore ready to use on an Arduino M..
€14.00
Ex Tax:€11.57
Model: 3.5TFT320X480TOUCHRPI
This display can be mounted directly on a Raspberry Pi 1, 2, 3 or 4, but requires additional installation of drivers. The display has a resolution of 320*480 pixels and is 3.5 inches diagonally. A resistive touchscreen is mounted on top of the displa..
€15.00
Ex Tax:€12.40
Model: ZJY350S110TTG11-ILI9488
A TFT display with resistive touchscreen.
Instructions display and touchscreen:
To get the display working you can use the TFT_eSPI library. For the touchscreen functionality the XPT2046_Touchscreen library can be used.
To use the TFT_eSPI lib..
€13.00
Ex Tax:€10.74
Model: ZJY-TFT400-11P-TOUCH-ILI9488
A TFT display with resistive touchscreen based on the ILI9488 driver.
Instructions display and touchscreen:
To get the display working you can use the TFT_eSPI library. For the touchscreen functionality the XPT2046_Touchscreen library can be used..
€20.00
Ex Tax:€16.53
Model: ZJY-TFT400-11P-TOUCH-ST7796
A TFT display with resistive touchscreen based on the ST7796S driver.
Instructions display and touchscreen:
To get the display working you can use the Adafruit_ST7796S_kbv library. This library works with the Adafruit-GFX-Library.
For the touchs..
€19.50
Ex Tax:€16.12
Model: 5LCD800X480TOUCHRPI
This display can be mounted on a Raspberry Pi 1, 2, 3 or 4 via an HDMI connector, but requires additional driver installation.
The display has a resolution of 800*480 pixels and is diagonally 5 inches. On top of the display is a resistive touchscree..
€34.50
Ex Tax:€28.51
2-4 Weeks
Model: 7LCD1024X600TOUCHRPI
This display can be connected to a Raspberry Pi 1, 2, 3 of 4 via an HDMI cable, but requires additional installation of drivers.
We have only tested the display in combination with a Raspberry Pi 3B with the Raspbian operating system accordin..
€55.00
Ex Tax:€45.45
Model: ASX00039
This display shield can be used to easilly expand the Arduino GIGA Wi-Fi R1 with a graphical interface.This module has a 3.97-inch TFT display with capacitive touchscreen. Other features of the display shield include a built-in microphone, RGB LED an..
€73.00
Ex Tax:€60.33
Model: DFROBOT-DFR0995
A small IPS-LCD display from DFRobot with curved edges. The display can be easily connected to DFRobot development boards that have a GDI (FFC) connector...
€12.00
Ex Tax:€9.92
Model: LILYGO-H566
A small display from LilyGO.
See the following page for an Arduino library for this display: Arduino_GFX..
€7.00
Ex Tax:€5.79
Model: LILYGO-H552
A small display from LilyGO...
€5.50
Ex Tax:€4.55
Model: LILYGO-H655
This is a display shield for the LilyGO T-Beam with touchscreen...
€20.50
Ex Tax:€16.94
Model: M5STACK-U120
Brand: M5Stack
This Color LCD Unit is a display module from M5Stack. The module contains a separate microcontroller that controls the display. This microcontroller can then be controlled via I2C in order to control the display. The software of the microcontroller c..
€19.00
Ex Tax:€15.70
Model: OPIPM
Brand: Orange Pi
The Orange Pi Portable Monitor is connected via HDMI or USB-C to a telephone or a (game) computer (such as an Orange Pi, Windows computer, Playstation or the Switch).
Note: No power adapter is included...
€87.50
Ex Tax:€72.31
Model: SEEED-104030087
An expansion module with numerous features for the XIAO series (or other development board with the same pin layout) from Seeed Studio.
Note: The battery for the RTC is not charged when the module is powered.
Note: No XIAO is included...
€25.00
Ex Tax:€20.66
Model: SH-LCD
A display module that can be used as a shield for the TinyPICO, TinyS2, TinyS3, TinyC6 and ProS3...
€11.50
Ex Tax:€9.50
Model: WS-15868
Brand: Waveshare
With this display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed.
See the following page for more information: 0.96 inch SPI IPS-TFT-LCD Display Module..
€7.50
Ex Tax:€6.20
Model: WS-19653
Brand: Waveshare
This 0.96 inch Waveshare display HAT is connected via the SPI interface of Raspberry Pi. The HAT has an integrated joystick and two push buttons.
Note: No Raspberry Pi Pico is included...
€7.50
Ex Tax:€6.20
Model: WS-18231
Brand: Waveshare
With this display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed.
See the following page for more information: 1.14 inch SPI IPS-TFT-LCD Display Module..
€8.50
Ex Tax:€7.02
Model: WS-19340
Brand: Waveshare
This 1.14 inch Waveshare display HAT is connected via the SPI interface of Raspberry Pi. The HAT has an integrated joystick and two push buttons.
Note: No Raspberry Pi Pico is included...
€8.50
Ex Tax:€7.02
Model: WS-19192
Brand: Waveshare
With this round display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed.
See the following page for more information: 1.28 inch Round SPI IPS-TFT-LCD Display Module..
€14.00
Ex Tax:€11.57
Model: WS-15867
Brand: Waveshare
With this display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed.
Specifications:
Supply voltage: 3.3V DC
Signal voltage: 3.3V
Display:
Display diagonal: 1.3 inch
Resolution..
€9.50
Ex Tax:€7.85
Model: WS-19650
Brand: Waveshare
This 1.3 inch Waveshare display HAT is connected via the SPI interface of Raspberry Pi Pico. The HAT has an integrated joystick and four tactile push buttons.
Note: No Raspberry Pi Pico is included...
€8.50
Ex Tax:€7.02
Model: WS-14972
Brand: Waveshare
This 1.3 inch Waveshare display is connected via the SPI interface of Raspberry Pi. The HAT has an integrated joystick and three tactile push buttons
For more information, see the following page: 1.3 inch LCD HAT..
€14.50
Ex Tax:€11.98
Model: WS-19576
Brand: Waveshare
This 1.44 inch Waveshare display HAT is connected via the SPI interface of Raspberry Pi Pico. The HAT has four tactile push buttons.
Note: No Raspberry Pi Pico is included...
€9.00
Ex Tax:€7.44
Model: WS-13891
Brand: Waveshare
This 1.44 inch Waveshare display is connected via the SPI interface of Raspberry Pi. The HAT has an integrated joystick and three tactile push buttons
For more information, see the following page: 1.44 inch LCD HAT..
€13.00
Ex Tax:€10.74
Model: WS-18079
Brand: Waveshare
With this display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed.
See the following page for more information: 1.54 inch SPI IPS-TFT-LCD Display Module..
€10.00
Ex Tax:€8.26
Model: WS-19579
Brand: Waveshare
This display is ideal to use as Hat for Raspberry Pi Pico.
Note: No Raspberry Pi Pico is included...
€9.00
Ex Tax:€7.44
Model: WS-13892
Brand: Waveshare
With this display for Arduino, Raspberry Pi, STM32, or other microcontroller, images and/or animations can be displayed.
See the following page for more information: 1.8 inch SPI TFT-LCD Display Module..
€9.50
Ex Tax:€7.85
Model: WS-18096
This display from Waveshare with touchscreen is connected to a computer (such as a Raspberry Pi or Windows computer) via HDMI and USB...
€109.00
Ex Tax:€90.08