Model: 12VREL16L-SD
An easy to use low active relay module with 16 relays in total. In addition, this module also contains a voltage converter to power the circuit and possibly an external microcontroller.
Specifications:
Supply voltage: 12V DC (via VCC pin)
..
€14.00
Ex Tax:€11.57
Model: 12VRELHL-30A
..
€6.00
Ex Tax:€4.96
Model: 12VREL2HL-30A
..
€7.50
Ex Tax:€6.20
Model: 12VREL4HL-30A
..
€10.00
Ex Tax:€8.26
Model: 12VRELADJ
A relay with an adjustable delay that works on 12V. As soon as the relay is powered with 12V, it takes a few (adjustable) seconds before the relay switches. The relay will only switch back when the input voltage disappears (see images).
Specificat..
€2.50
Ex Tax:€2.07
Model: 12VRELADJ-1H-NONCADJ
A relay with an adjustable delay that works on 12V. As soon as the relay is powered with 12V, it takes a few (adjustable) seconds before the relay switches. The time can be set between 0.1s and 1 hour. In addition, this relay module can also be set t..
€5.00
Ex Tax:€4.13
New
Model: 24VREL8HL-30A
..
€18.00
Ex Tax:€14.88
Model: 5VRELHA
A simple module with one relay.
This version works on 5V. The input works on 0V and 5V (active high).
The relay therefore switches if there is a signal of 5V on the input ("IN") and does nothing (not switched) with a signal of 0V.
Specifica..
€2.50
Ex Tax:€2.07
Model: 5VRELHL
An easy to use relay module that can be set to high- or low-active.
Specifications:
Supply voltage: 5V DC
Signal voltage: 3.3-5V
Current per relay (when switched on): ~70mA
Signal current ("IN" pin): ~5mA
Maximum voltage through..
€2.50
Ex Tax:€2.07
Model: 5VREL2HL
An easy to use relay module that can be set to high- or low-active.
Pinout:
DC+: 5V supply voltage
DC-: Ground/GND
IN1-IN2: Signal pins
NO: Relay normally open
COM: Relay common
NC: Relay normally closed..
€4.50
Ex Tax:€3.72
Model: 5VREL2L
A moduele with two relays on board.
This version works on 5V. The input works on 0V and 5V (Active low).
The relay therefore switches if there is a 0V signal on the input ("IN") and does nothing (not switched) with a signal of 5V.
Specifica..
€4.50
Ex Tax:€3.72
Model: 5VREL4HL
An easy to use relay module that can be set to high- or low-active.
Pinout:
DC+: 5V supply voltage
DC-: Ground/GND
IN1-IN4: Signal pins
NO: Relay normally open
COM: Relay common
NC: Relay normally closed..
€7.00
Ex Tax:€5.79
Model: 5VREL4
A module with four relays on board.
This version works on 5V. The input works on 0V and 5V (Active low).
The relay therefore switches if there is a 0V signal on the input ("IN") and does nothing (not switched) with a signal of 5V.
Specifica..
€7.00
Ex Tax:€5.79
Model: 5VREL8HL
An easy to use relay module that can be set to high- or low-active.
Specifications:
Supply voltage: 5V DC
Signal voltage: 3.3-5V
Current per relay (when switched on): ~70mA
Signal current ("IN" pins): ~5mA
Maximum voltage throug..
€10.00
Ex Tax:€8.26
Model: 5VREL8
A module with eight relays on board.
This version works on 5V. The input works on 0V and 5V (active low).
The relay therefore switches if there is a 0V signal on the input ("IN") and does nothing (not switched) with a signal of 5V.
Specific..
€10.00
Ex Tax:€8.26
Model: 5VREL1HL-30A
..
€6.00
Ex Tax:€4.96
Model: 5VREL4HL-30A
..
€10.00
Ex Tax:€8.26
Model: 5VREL2HL-30A
..
€7.50
Ex Tax:€6.20
-1-channel-low-active-detail-600x600.jpg "5V Relay Module for ESP-01(S) - 1 Channel - Low-active")
2-4 Weeks
Model: 5VRELL-ESP01
A relay module specially made to be switched by an ESP-01(S) module.
Note: An ESP-01(S) module is not included...
€2.50
Ex Tax:€2.07
Model: 5VSOLIDREL1H
A solid state relay (SSR) works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Relay type: G3MB-202P
Supply..
€4.00
Ex Tax:€3.31
Model: 5VSOLIDREL1L
A solid state relay works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Uses 5V G3MB-202P Solid State relay ..
€4.00
Ex Tax:€3.31
Model: 5VSOLIDREL2L
A solid state relay works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Uses 5V G3MB-202P Solid State relay ..
€5.50
Ex Tax:€4.55
Model: 5VSOLIDREL4H
A solid state relay works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Uses 5V G3MB-202P Solid State relay ..
€8.00
Ex Tax:€6.61
Model: 5VSOLIDREL4L
A solid state relay works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it is not subject to mechanical wear.
Specifications:
Uses 5V G3MB-202P Solid State relay th..
€8.00
Ex Tax:€6.61
Model: 5VSOLIDREL8H
A solid state relay (SSR) works the same as a standard (mechanical) relay. However, a solid state relay can be switched on and off much more often because it does not experience mechanical wear.
Specifications:
Relay type: G3MB-202P
Supply..
€12.00
Ex Tax:€9.92
Model: A000110
This Arduino 4 Relays Shield is a board with four individually controlled relays.
Specifications:
Operating voltage: 5V
Coil current: 35 mA (for each relay that is switched on, so 140 mA with all relays switched on)
Max. current pe..
€28.00
Ex Tax:€23.14
Model: DFROBOT-DFR0144
Brand: DFRobot
A relay shield suitable for Arduino Uno (compatible) boards. In addition to the relays, this shield also has an adapter for an Xbee module and a number of servo connectors...
€15.50
Ex Tax:€12.81
Model: DFROBOT-DFR0996
A latching relay module from DFRobot that works on both 3.3V and 5V. This relay holds its last set state, even when powered off.
Note: Due to the PCB design, this module is not safe for switching mains voltage...
€7.00
Ex Tax:€5.79
Model: LILYGO-H630
An expansion module for the T-RelayS3. The module is easy to connect via the included cable. In total, a maximum of 3 can be connected in sequence for a total of 24 relays (including the 6 of the T-RelayS3)...
€18.50
Ex Tax:€15.29
Model: LILYGO-H561
The T-Relay-8 is a handy relay module with Wi-Fi and Bluetooth. This module has 8 relays and an ESP32-Wrover.
Note: This board does not have a built-in USB to serial converter, to program the board the following converter is needed: TTGO T-U2T..
€23.50
Ex Tax:€19.42
Model: LILYGO-H629
The T-RelayS3 is a handy relay module with Wi-Fi and Bluetooth. This module contains 6 relays and an ESP32-S3 microcontroller. The module comes with a housing that can be mounted on a DIN rail. In addition, the design offers the possibility to easily..
€39.50
Ex Tax:€32.64
Model: LILYGO-H559
LilyGO's T-SimHat is an expansion module/HAT for LilyGO's T-SIM series and is suitable for the SIM7000, A7670 and A7608 series. This hat comes with a relay and a connection for CAN and RS485...
€12.50
Ex Tax:€10.33
Model: LILYGO-H516
The T-Relay is a handy relay module with Wi-Fi and Bluetooth. This module has 4 relays and an ESP32-Wrover.
See the following page for more information and examples: LilyGO T-Relay Github
Note: This board does not have a built-in USB to serial ..
€15.00
Ex Tax:€12.40
Model: M5STACK-M124
Brand: M5Stack
A relay module from M5Stack that is suitable for switching mains voltage...
€15.00
Ex Tax:€12.40
Model: M5STACK-M121-V11
Brand: M5Stack
A relay module from M5Stack with 4 channels. The relays are controlled via an STM32F030 microcontroller, which in turn can be controlled by an M5Core via I2C...
€14.00
Ex Tax:€11.57
Model: M5STACK-U097
Brand: M5Stack
A relay module for M5Stack products.
Specifications:
Relay:
Maximum switching voltage: 250V AC or 28V DC
Maximum switching current:
Resistive load: 10A
Number of channels: 4
Communication: I2C
I2C ad..
€16.50
Ex Tax:€13.64
Model: M5STACK-U140
Brand: M5Stack
A solid state relay from M5Stack, suitable for switching DC voltages up to 220V DC...
€22.50
Ex Tax:€18.60
Model: M5STACK-U023
Brand: M5Stack
This is a mini relay module for M5Stack.
Specifications:
Maximum voltage through relay: 220V AC or 30V DC
Maximum current through relay: 3A
2x LEGO® compatible holes
1x 3 Pin HT3.96 connection (for the relay pins)
1x Grove connection..
€6.00
Ex Tax:€4.96
Model: M5STACK-U122
Brand: M5Stack
This is a solid state relay (SSR) Unit from M5Stack. An SSR works the same as a standard (mechanical) relay. However, an SSR can be turned on and off much more often because it does not experience mechanical wear. Another important difference is that..
€9.50
Ex Tax:€7.85
Model: HK19F-DC5V-SHG
A loose relay to place on a printed circuit board.
Specifications (brief):
Voltage (relay): 5V
Current (relay): approximately 30mA
Maximum switching voltage: 250VAC
Maximum switching current: 2A (at 30VDC), 1A (at 125VAC), 500mA (at 25..
€1.50
Ex Tax:€1.24
Model: HK4100F-DC5V-SHG
A loose relay to place on a printed circuit board.
Specifications (brief):
Voltage (relay): 5V
Current (relay): approximately 30mA
Maximum switching voltage: 300VAC
Maximum switching current: 3A (at 250VAC)
Model: HK4100F-DC5V-..
€1.00
Ex Tax:€0.83
Model: SEEED-103020012
A high active relay module with 1 channel from Seeed Studio. By simply applying a 5V signal to the SIG pin, the relay changes state.
Specifications:
Supply voltage: 5V DC
Signal voltage: 5V
Relay:
Maximum switching voltage: 250V AC..
€13.00
Ex Tax:€10.74
Model: SEEED-103020133
A relay module from Seeed Studio with accompanying enclosure. The relays are easy to control individually via I2C.
Specifications:
Supply voltage: 5V DC
Signal voltage: 3.3V
Communication: I2C
Default I2C address: 0x11 or 0x12
Relay:..
€18.50
Ex Tax:€15.29
Model: SLA-05VDC-SL-C
A relay to place on a printed circuit board...
€2.00
Ex Tax:€1.65
Model: SMI-05VDC-SL-2C
A relay to place on a printed circuit board...
€1.75
Ex Tax:€1.45
Model: SMI-12VDC-SL-2C
A relay to place on a printed circuit board...
€1.75
Ex Tax:€1.45