Model: SOILMOISWCABLE
With this sensor you measure the humidity of the soil. The sensor distinguishes itself from other soil moisture sensors by the capacitive measurement instead of a resistance measurement. This makes the sensor more resistant to corrosion which is why ..
€4.00
Ex Tax:€3.31
Model: SOILMOISBUZZ
Independent soil moisture sensor with built-in buzzer that gives a warning when the humidity is low.
The sensor distinguishes itself from other soil moisture sensors by the capacitive measurement instead of a resistance measurement. This makes the..
€4.50
Ex Tax:€3.72
Model: CHIRP!I2CWCABLE
This is the I2C variant of the Chirp! Plant Watering Alarm. This variant has no buzzer, but can be read out via I2C. Examples are available for Arduino and Raspberry Pi, among others.
The sensor differs from other soil moisture sensors by the capa..
€14.50
Ex Tax:€11.98
Discontinued
Model: CHIRP!BUZZER
An independent soil moisture sensor from Chirp! with built-in buzzer that gives a warning (chirp) when the soil moisture level is low. The threshold of the moisture level can be set with the button. This soil moisture sensor lasts a long time on a bu..
€14.00
Ex Tax:€11.57
Model: DFROBOT-DFR0300
Brand: DFRobot
There is no product description available yet. See the following page for information about this product: DFRobot Gravity Analog pH Sensor Kit V2
Note: This product can not be returned if the sealed packaging has been opened...
€85.00
Ex Tax:€70.25
Model: DFROBOT-SEN0161-V2
Brand: DFRobot
There is no product description available yet. See the following page for information about this product: DFRobot Gravity Analog pH Sensor Kit V2
Note: This product can not be returned if the sealed packaging has been opened...
€46.00
Ex Tax:€38.02
Model: DFROBOT-SEN0169-V2
Brand: DFRobot
Note: This product can not be returned if the sealed packaging has been opened...
€69.50
Ex Tax:€57.44
New
Model: DFROBOT-SEN0114
Brand: DFRobot
This soil moisture sensor from DFRobot makes it possible to read the moisture in the soil, ideal for monitoring your garden and/or plant!..
€3.50
Ex Tax:€2.89
Model: DFROBOT-SEN0257
Brand: DFRobot
This water pressure sensor from DFRobot can easily be used in combination with a microcontroller...
€22.00
Ex Tax:€18.18
Model: DFROBOT-SEN0575
Brand: DFRobot
A rain sensor from DFRobot. This sensor uses a small internal tray that collects rainwater until it tilts and sends a pulse to the sensor. By measuring the pulses from the tilting tray, this sensor can accurately determine the amount of rain in mm.
..
€33.00
Ex Tax:€27.27
Model: DFROBOT-SEN0554
A analog turbidity sensor from DFRobot. This sensor is to be mounted on two sides of a see through container, without making contact with the liquid...
€9.50
Ex Tax:€7.85
Model: FM-PS2216
A flow sensor suitable for measuring small flows of liquids (water). The water connections are almost exactly 6mm, so it is directly suitable with our 3.5mm hose: Hose 3.5mm
In addition, it can also be used with our 6mm hose with an extra clip: Hose..
€4.00
Ex Tax:€3.31
Model: HK1100C-1.2MPA
With this sensor you can easily measure water pressure. Based on the output voltage, the water pressure can be calculated with the following equation:
P = 15 Vout/Vcc - 1.5
Where P is the water pressure (in bar), Vout is the output voltage and ..
€11.00
Ex Tax:€9.09
Model: KS0510
With this sensor you measure soil moisture. The sensor differs from other soil moisture sensors because of its capacitive measurement instead of a resistance measurement. In addition, the adapter PCB is separate from the sensor PCB, making it less li..
€4.00
Ex Tax:€3.31
Model: KS0049
An analog soil moisture sensor...
€4.00
Ex Tax:€3.31
Model: Keyestudio-KS0203
A steam and rain sensor module from Keyestudio. This sensor measures the amount of liquid on the measuring surface to detect steam or water.
Note: The pin headers and components on the PCB are not waterproof...
€3.00
Ex Tax:€2.48
Model: M5STACK-U019
Brand: M5Stack
This is a module with a soil moisture sensor for M5Stack.
Specifications:
Analog and digital output (high/low)
Type of soil moisture sensor: Resistive
Adjustable threshold value for digital output via potentiometer
2x LEGO® compati..
€4.00
Ex Tax:€3.31
Model: M5STACK-U101
Brand: M5Stack
The Watering Unit from M5Stack is a capacitive soil moisture sensor module. In addition, this unit also contains a water pump that can be connected to a water source with the supplied hose. For example, with this module you can easily react to l..
€15.00
Ex Tax:€12.40
Model: MW-FS-2.0
With this sensor you can easily measure the flow of liquids (water). The water connections are suitable for a 6mm hose: Hose 6mm
Pinout:
Red: Vcc/plus (supply voltage)
Black: GND/min
Yellow: Signal
See the following page for a ..
€4.00
Ex Tax:€3.31
Model: RAINSENSOR
An adjustable rain sensor to measure if water flows along a surface.
Has a digital output and analog output. With the potentiometer you can set the threshold value.
Specifications:
Voltage: 3.3-5V DC (Vcc and GND, is shown on printed circui..
€2.50
Ex Tax:€2.07
Model: SEEED-114992871
This SenseCAP sensor from Seeed Studio can measure the humidity, temperature and electrical conductivity (EC) of soil. In addition, it can be used wirelessly at a great distance with LoRaWAN. Due to the dust-proof and splash-proof housing, this senso..
€160.00
Ex Tax:€132.23
-600x600.jpg "Soil Humdity Sensor Module")
Model: BODEMVOCHT
The module can be ajusted so that it gives a high signal at a certain level of humidity. Besides that, this module also has an analog pin to measure a variable output. You can mesaure the humidity by sticking the two points into the soil.
Specific..
€3.00
Ex Tax:€2.48
Model: SOILCABLE1.2M
The module can be adjusted so that it gives a high signal at a certain moisture level . Besides that, this module also has an analog pin to measure a variable output.
Specifications:
Voltage: 3.3 - 12V DC
Current (in use): <20mA
..
€7.00
Ex Tax:€5.79
Model: YTF-01
A standard solenoid valve with water flow sensor. With this, for example, the water flow in a hose or pipe can be measured and regulated.
The output of the sensor gives 9.4 pulses per second with a duty cycle of approximately 50% for every liter o..
€10.50
Ex Tax:€8.68
Model: SONOFF-MS01
Note: This link is for the soil moisture sensor for the TH Elite/Origin. This product has a different connector, otherwise it is identical...
€14.00
Ex Tax:€11.57
Model: WATERLVLSENSOR
A water level sensor that allows you to measure the height of water in a container for example.
Has an analog output with which the level can be determined roughly.
Specifications:
Voltage: 3.3-5V DC (+ and -, is listed on printed ci..
€1.50
Ex Tax:€1.24
Model: YF-S201C
With this sensor you can easily measure the flow of liquids (water).
The sensor has a standard 1/2" coupling (21mm) on both sides and is therefore easy to connect to, for example, a Gardena garden system (see images)(Gardena coupling not included)..
€4.00
Ex Tax:€3.31
Model: YF-2103-1.2-180DEG
With this sensor you can easily measure the flow of liquids (water). The water connections are suitable for a 6mm hose: Hose 6mm
Pinout:
Red: Vcc/plus (supply voltage)
Black: GND/min
Yellow: Signal
See the following page for a tutor..
€4.00
Ex Tax:€3.31
Model: YF-2103-3.5-0DEG
With this sensor you can easily measure the flow of liquids (water). The water connections are suitable for a 6mm hose: Hose 6mm
Pinout:
Red: Vcc/plus (supply voltage)
Black: GND/min
Yellow: Signal
See the following page for a ..
€4.00
Ex Tax:€3.31
Model: YF-B1
With this sensor you can easily measure the flow of liquids (water).
The output of the sensor gives 11 pulses per second with a duty cycle of approximately 50% for every liter of liquid that passes through it per minute: Q [L/min] = fpulse[Hz ]/11..
€6.00
Ex Tax:€4.96
Model: YF-B10
With this sensor you can easily measure the flow of liquids (water).
Pinout:
Red: Vcc/plus (supply voltage)
Black: GND/min
Yellow: Signal
See the following page for a tutorial with a similar sensor: How to Use Water Flow Sensor - Ar..
€10.50
Ex Tax:€8.68
Model: YF-B6
With this sensor you can easily measure the flow of liquids (water).
The output of the sensor gives 6.6 pulses per second with a duty cycle of approximately 50% for every liter of liquid that passes through it per minute: Q [L/min] = fpulse[Hz ]/6..
€6.75
Ex Tax:€5.58
Model: YF-B6TEMP
With these sensors you can easily measure the flow and temperature of liquids (water).
The output of the sensor gives 6.6 pulses per second with a duty cycle of approximately 50% for every liter of liquid that passes through it per minute: Q [L/mi..
€8.50
Ex Tax:€7.02
Model: YF-B7
With these sensors you can easily measure the flow and temperature of liquids (water).
The output of the sensor gives 11 pulses per second with a duty cycle of approximately 50% for every liter of liquid that passes through it per minute: Q [L/min..
€7.00
Ex Tax:€5.79
Model: YF-C01
With this sensor you can easily detect the flow of liquids (water).
*Note: The product states that a maximum of 220V can be switched, but we do not recommend this for safety reasons...
€6.50
Ex Tax:€5.37
Model: YF-C02
This switch switches when water flows through it.
Specifications:
Maximum switching voltage: 30V*
Maximum switching current: 500mA
Maximum contact resistance: 1Ω
Contact: Normally open (NO)
Minimum flow rate (to close circuit): ~1.5L..
€8.00
Ex Tax:€6.61
Model: YF-S401
With this sensor you can easily measure the flow of liquids (water).
The sensor has a 7mm coupling on both sides and is therefore easy to connect to a 6mm hose.
The output of the sensor gives 98 pulses per second with a duty cycle of appro..
€4.00
Ex Tax:€3.31
Showing 1 to 48 of 48 (1 Pages)