Brand: M5Stack
Model: M5STACK-U216
The M5Stack NFC Unit can read, write, and emulate NFC/RFID tags and cards...
€9.25
Ex Tax:€7.64
The Fnirsi SAG-55 is a very handy hot air gun that can be used for desoldering components...
€54.00
Ex Tax:€44.63
Note: No antenna is included. ..
€20.00
Ex Tax:€16.53
A soldering tip that is suitable for a.o. Fnirsi HS-02A soldering irons...
€5.75
Ex Tax:€4.75
A soldering tip that is suitable for a.o. Fnirsi HS-02A soldering irons...
€5.75
Ex Tax:€4.75
A soldering tip that is suitable for a.o. Fnirsi HS-02A soldering irons...
€5.75
Ex Tax:€4.75
A soldering tip that is suitable for a.o. Fnirsi HS-02A soldering irons...
€5.75
Ex Tax:€4.75
A soldering tip that is suitable for Fnirsi HS-02A soldering station with passive tips...
€5.75
Ex Tax:€4.75
A soldering tip that is suitable for a.o. Fnirsi HS-02A soldering irons...
€5.75
Ex Tax:€4.75
Brand: M5Stack
Model: M5STACK-A173
A watch accessory kit from M5Stack for the M5Stick series.
Note: M5Stick is not included...
€6.00
Ex Tax:€4.96
Model: SE-INKPLATE6-MOTION
..
€179.95
Ex Tax:€148.72
Model: SE-INKPLATE6-FLICK
..
€179.95
Ex Tax:€148.72
Model: SE-INKPLATE6-COLOR
..
€129.95
Ex Tax:€107.40
Model: SE-INKPLATE6
..
€109.95
Ex Tax:€90.87
Model: SE-INKPLATE5-GEN2
..
€74.95
Ex Tax:€61.94
Model: SE-ENCLOSURE-INKPLATE6-MOTION
A simple enclosure for the Inkplate 6MOTION display.
Note: Inkplate 6MOTION is not included...
€24.95
Ex Tax:€20.62
Model: SE-ENCLOSURE-INKPLATE6-FLICK
A simple enclosure for the Inkplate 6FLICK display...
€24.95
Ex Tax:€20.62
Model: SE-ENCLOSURE-INKPLATE6-COLOR
A simple enclosure for the Inkplate 6COLOR display...
€24.95
Ex Tax:€20.62
Model: SE-ENCLOSURE-INKPLATE6
A simple enclosure for the Inkplate 6 display...
€24.95
Ex Tax:€20.62
Model: SE-ENCLOSURE-INKPLATE5-GEN2
A simple enclosure for the Inkplate 5Gen2 display...
€19.95
Ex Tax:€16.49
A soldering iron with adjustable temperature from Fnirsi.Note: No power supply is included. Ideally, a USB PD/QC charger with a minimum output of 100W..
€42.50
Ex Tax:€35.12
This filament can be used with the AzureFilm master spool, but is also compatible with Bambu Lab refill rolls...
€14.90
Ex Tax:€12.31
Model: OMGUSB
A USB-C breakout module from Unexpected Maker for programming the OMGS3. Pogo pins are included, which can be soldered onto the programming module; th..
€10.75
Ex Tax:€8.88
Model: OMGS3-01
Note: the board does not have a USB connector. To program the board, the OMGUSB can be used...
€16.50
Ex Tax:€13.64
This product is a separate WS2812B LED that you have to solder yourself. The color of the LED is controlled by the built-in chip. You can place a lot ..
€51.75
Ex Tax:€42.77
Model: SE-ENCLOSURE-INKPLATE2
A simple enclosure for the Inkplate 2 display...
€13.75
Ex Tax:€11.36
Model: RAK-100064
A rotary encoder module from RAKwireless for the modular WisBlock system...
€7.25
Ex Tax:€5.99
Model: SE-INKPLATE2
..
€29.95
Ex Tax:€24.75
Model: RAK-205008
This LoRa tracker from RAKwireless initially looks like a simple sticker but has number of features such as a tracker function, built-in battery (not ..
€26.00
Ex Tax:€21.49
Model: RAK-100214
An FRAM storage module from RAKwireless for the modular WisBlock system...
€7.75
Ex Tax:€6.41
Model: RAK-100017
An EEPROM storage module from RAKwireless for the modular WisBlock system...
€12.25
Ex Tax:€10.12
Model: RAK-100058
A relay module from RAKwireless for the modular WisBlock system.
Note: The images show only an NO contact, but the module actually has both NO and ..
€9.00
Ex Tax:€7.44
Model: RAK-100099
A CAN bus interface module from RAKwireless for the modular WisBlock system...
€10.50
Ex Tax:€8.68
A distance sensor from PONO that uses dToF (direct Time of Flight) to measure a relatively long distance. Furthermore, the sensor features a waterproo..
€61.00
Ex Tax:€50.41
A disconnect cable luge...
€6.00
Ex Tax:€4.96
Model: RAK-100003
An RS485 module from RAKwireless for the modular WisBlock system...
€7.25
Ex Tax:€5.99
Model: RAK-100095
A power over ethernet (PoE) module for the RAK13800 ethernet module from RAKwireless.
Note: RAK13800 ethernet module is not included...
€18.75
Ex Tax:€15.50
Model: RAK-100076
An ethernet module from RAKwireless for the modular WisBlock system.
The ethernet module can also be expanded with PoE with the RAK19018 PoE Module..
€9.75
Ex Tax:€8.06
Model: OPENTHERMADP
The OpenTherm Master Adapter is development board based on a ESP32-S3 microcontroller. OpenTherm is a standardized protocol used between a thermostat ..
€14.50
Ex Tax:€11.98
Brand: M5Stack
Model: M5STACK-U209
A module from M5Stack with a Time-of-Flight ToF distance sensor for the modular chain system...
€10.50
Ex Tax:€8.68
Model: Keyestudio-KS0168
A motor module with a small propeller from Keyestudio...
€3.50
Ex Tax:€2.89
This filament can be used with the AzureFilm master spool, but is also compatible with Bambu Lab refill rolls...
€14.90
Ex Tax:€12.31
This filament can be used with the AzureFilm master spool, but is also compatible with Bambu Lab refill rolls...
€14.90
Ex Tax:€12.31
This filament can be used with the AzureFilm master spool, but is also compatible with Bambu Lab refill rolls...
€14.90
Ex Tax:€12.31
This filament can be used with the AzureFilm master spool, but is also compatible with Bambu Lab refill rolls...
€14.90
Ex Tax:€12.31
This filament can be used with the AzureFilm master spool, but is also compatible with Bambu Lab refill rolls...
€14.90
Ex Tax:€12.31
The SN74HC74N is a dual D-type positive-edge triggered flip-flop with asynchronous set and reset...
€0.80
Ex Tax:€0.66
The SN74HC595N is an 8-bit serial-in/parallel-out (SIPO) shift register with output latch, commonly used in digital logic applications...
€0.80
Ex Tax:€0.66
The SN74HC283N is a 4-bit binary full adder, commonly used in digital logic applications...
€0.90
Ex Tax:€0.74
The SN74HC273N is an octal D-type flip-flop with a common clock and an asynchronous reset...
€0.85
Ex Tax:€0.70
The SN74HC245N is an octal bus transceiver with 3-state outputs, commonly used in digital logic applications...
€0.80
Ex Tax:€0.66
The SN74HC165N is an 8-bit parallel-in/serial-out (PISO) shift register, commonly used in digital logic applications...
€0.80
Ex Tax:€0.66
The SN74HC161N is a 4-bit synchronous binary counter with asynchronous reset, commonly used in digital logic applications for counting...
€0.80
Ex Tax:€0.66
A GNSS HAT for Raspberry Pi from Waveshare, based on the MAX-M8Q chip. The HAT is designed for a Raspberry Pi, but also works with microcontrollers su..
€29.50
Ex Tax:€24.38
Model: AE036
A case with integrated heatsink for Radxa SBCs, like the ROCK 5A, ROCK 5C(+), Cubie Q6A, and Cubie A7A...
€12.00
Ex Tax:€9.92
Polymaker HT-PLA Pro is a high-performance PLA filament that combines exceptional heat resistance (up to 150°C), increased impact strength, and easy p..
€25.99
Ex Tax:€21.48
Polymaker HT-PLA Pro is a high-performance PLA filament that combines exceptional heat resistance (up to 150°C), increased impact strength, and easy p..
€25.99
Ex Tax:€21.48
Model: PIONEER-TS-A6971F
This A-Series Pioneer speaker features carefully selected materials to enhance bass and treble while delivering Pioneer's Open & Smooth sound conc..
€83.00
Ex Tax:€68.60
Model: GOOBAY-76275
An Ultra High Speed HDMI cable from Goobay. This Active Optical Cable (AOC) uses fiberglass for fast and stable data transfer, also over long distance..
€39.50
Ex Tax:€32.64
Model: DL-J13G3-F08S15ATJ
..
€8.25
Ex Tax:€6.82
Model: DL-J13G3-F04S15ATJ
..
€7.00
Ex Tax:€5.79
Model: PONO-US4000LSG-M20
A waterproof distance sensor from PONO that utilizes Ultrasonic Time-of-Flight (ToF) technology to measure distances up to 4m through water, communica..
€51.50
Ex Tax:€42.56
Model: 5MMLEDHOLD100X
A set of LED holders for 5mm LEDs...
€3.00
Ex Tax:€2.48
Model: 5MMLEDHOLD10X
A set of LED holders for 5mm LEDs...
€0.50
Ex Tax:€0.41
Model: RAK-110218
A GNSS location module from RAKwireless for the modular WisBlock system...
€12.25
Ex Tax:€10.12
Model: JSTPAF-DPF-5P30CM
A JST-PA to DuPont compatible cable.
Note: The cable is suitable for Panasonic and Toshiba devices, but the colors don't logically correspond with ..
€2.40
Ex Tax:€1.98
Model: GOOBAY-76274
An Ultra High Speed HDMI cable from Goobay. This Active Optical Cable (AOC) uses fiberglass for fast and stable data transfer, also over long distance..
€33.75
Ex Tax:€27.89
A connector cable for the 16mm metal push buttons with LED. The connector has 5 pins, and is not compatible with the RGB LED push buttons...
€0.75
Ex Tax:€0.62
The SKR 3 is a very comprehensive motherboard for your 3D printer, on which you can use Marlin, Klipper or RepRap Firmware...
€67.25
Ex Tax:€55.58
A Time of Flight distance sensor module from Seeed Studio with grove connector. ..
€9.50
Ex Tax:€7.85
Model: RAK-100002
An adapter module from RAKwireless for the modular WisBlock system. The module has a QWIIC (=STEMMA QT/JST-SH) interface, 2 Grove connectors, and pinh..
€8.25
Ex Tax:€6.82
Model: RAK-110098
A particle matter sensor module from RAKwireless for the modular WisBlock system...
€40.50
Ex Tax:€33.47
Model: RAK-100053
A Time of Flight distance sensor module from RAKwireless for the modular WisBlock system...
€10.50
Ex Tax:€8.68
Model: RAK-110043
A gas sensor module from RAKwireless for the modular WisBlock system...
€13.00
Ex Tax:€10.74
Model: GOOBAY-77846
A versatile tool set with bit holder, bit set, side cutter, needle-nose pliers, and several screwdrivers in a handy storage case...
€14.50
Ex Tax:€11.98
This Ethernet development board from Waveshare is based on the ESP32-S3 chip and supports Wi-Fi, Bluetooth and Ethernet with PoE. Furthermore, this de..
€19.50
Ex Tax:€16.12
This filament can be used with the AzureFilm master spool, but is also compatible with Bambu Lab refill rolls...
€14.90
Ex Tax:€12.31