New
Waveshare ESP32-S3 with 1.85 inch Round IPS Display with Touchscreen and IMU - with Speakers
- Availability: Directly available from warehouse in Eindhoven
- SKU: 007779
€33.75
Ex Tax: €27.89
A development board from Waveshare based on a ESP32-S3 microcontroller by Espressif with multiple sensors. Thanks to the built-in USB connector, it is easy to program. Things can be shown on the built-in IPS display and with the touchscreen, an extensive user interface can be created. For extra connectivity, the board has multiple wireless communication interfaces (including Wi-Fi/Bluetooth). Finally, the board has a battery connector where a Li-Po/Li-ion battery (not included) can be connected, which can also be charged via the board.
See the following page for more information: Wiki
Reviews Over Waveshare ESP32-S3 with 1.85 inch Round IPS Display with Touchscreen and IMU - with Speakers
This product has 0 review(s) in total.
Report this review.
Tags:
Microcontroller Boards
, With Bluetooth
, Waveshare ESP32-S3 with 1.85 inch Round IPS Display with Touchscreen and IMU - with Speakers
, 007779
, Waveshare
, 28514
, Battery charger
, Display
, Microcontroller (MCU)
, Touchscreen
, SD-card adapter
, Audio amplifier
, RTC
, Speaker/buzzer
, Acceleration sensor
, Gyroscope
, I2C
, I2S
, SPI
, UART
, PWM
, ADC
, GPIO
, USB CDC
, Wi-Fi
, Bluetooth
Specifications
| General | |
| Brand | Waveshare |
| Manufacturer model/SKU | 28514 |
| Model revision | Rev2.0 |
| Features | RTC Display Gyroscope Touchscreen Speaker/buzzer Audio amplifier Battery charger SD-card adapter Acceleration sensor Microcontroller (MCU) |
| General physical appearance | |
| Main color | Black |
| Weight [g] | 26 |
| Dimension X [mm] | 55 |
| Dimension Y [mm] | 55 |
| Mounting options | Screw thread |
| Thread size | M2 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 |
| Maximum supply voltage [V DC] | 5 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 40 |
| Maximum IO-pin sink current [mA] | 28 |
| MCU | |
| Manufacturer | Espressif |
| Chip series | ESP32-S3 |
| Maximum clock frequency [MHz] | 240 |
| Number of cores | 2 |
| Internal memory | |
| SRAM [KB] | 512 |
| PSRAM [MB] | 8 |
| Flash memory [MB] | 16 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC I2C I2S PWM SPI GPIO UART USB CDC |
| Available GPIO pins | 10, 11, 19, 20, 43, 44 |
| Number of IO-pins | 6 |
| Maximum available hardware PWM channels | 6 |
| Maximum available analog input pins (ADC) | 4 |
| DAC chip | PCM5101A |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 3 |
| Maximum available hardware I2C interfaces | 2 |
| Maximum available hardware SPI interfaces | 1 |
| USB to serial converter | Integrated into microcontroller |
| Supported SD card size | Micro SD |
| Wireless communication | |
| Interface(s) | Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | ESP32-S3 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32-S3 |
| Bluetooth version | 5.0 |
| Supported Bluetooth standard(s) | LE |
| Display | |
| Type | IPS |
| Driver | ST77916 |
| Screen diagonal [inch] | 1.85 |
| Number of pixels long side | 360 |
| Number of pixels short side | 360 |
| Display shape | Round |
| Pixel colors | RGB |
| Touchscreen | |
| Touchscreen controller | CST816 |
| Touch type | Capacitive |
| Multi-touch support | Yes |
| Acceleration sensor | |
| Sensor chip/SoC | QMI8658C |
| Degrees of freedom (DOF) | 3 |
| Maximum measuring range [±g] | 16 |
| Maximum resolution [bit] | 16 |
| Gyroscope | |
| Sensor chip/SoC | QMI8658A |
| Degrees of freedom (DOF) | 3 |
| Maximum measuring range [±°/s] | 2048 |
| Maximum resolution [bit] | 16 |
| RTC | |
| RTC chip | PCF85063A |
| Back-up battery/capacitor | Optional (JST-SH connector) |
| Audio amplifier | |
| Amplifier chip | APA2068 |
| Number of (normal) channels | 2 |
| Maximum power per (normal) channel [W] | 2.6 |
| Battery circuit | |
| Battery charger chip/SoC | ETA6098 |
| Supported battery chemistry | Li-Po Li-ion |
| Maximum charging voltage [V] | 4.2 |
| Maximum charging current [mA] | 2000 |
| Adjustable charging current | No |
| Protection circuit | No |
| Connectors | |
| Power supply connector(s) | USB-C female |
| IO-connector(s) | USB-C female JST-SH (compatible) male |
| Battery connector(s) | Molex Picoblade (compatible) male |
| Speaker connector(s) | Molex Picoblade (compatible) male |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna IPEX MHF 1/uFL male (requires modification) |
| Package contents | |
| Package contents | 1x Speaker 1x Display module 2x JST-SH to DuPont compatible cable 4p |