Model: TPA3110BTCASE
A compact but powerful amplifier with Bluetooth...
€5.50
Ex Tax:€4.55
Model: PAM8403GR
This is a compact stereo amplifier. You can connect up to two speakers, for example these speakers: Small Speaker - 4Ω 3W.
Specifications:
Supply voltage: 2.5-5.5V DC
Maximum power: 2x3W (4Ω)
Dimensions PCB: 18 x 21mm
Package conten..
€1.50
Ex Tax:€1.24
Model: PAM8403RED
This is a compact stereo amplifier. You can connect up to two speakers, for example these speakers: Small Speaker - 4Ω 3W.
This red variant has an "SW" pin. When this pin is connected to the GND, the amplifier will be turned off. By default this p..
€2.00
Ex Tax:€1.65
Model: PAM8403THUMB
Very suitable in combination with small, medium and even large speakers!
3W may not sound like much, but if you use 5V and 4Ohm speakers, a lot of sound will come out for such a small board!
It is based on the Class-D audio amplifier principle, and..
€3.50
Ex Tax:€2.89
Model: PAM8403VC2
This is a compact stereo amplifier. You can connect up to two speakers, for example these speakers: Small Speaker - 4Ω 3W.
There is a potentiometer with switch to adjust the volume and to turn the amplifier on/off.
Specifications:
Supply ..
€3.00
Ex Tax:€2.48
Model: PAM8406VCSCREW
Suited for small, medium and even large speakers!..
€5.00
Ex Tax:€4.13
Model: BTAUDIORECEIVER-CT14
This Stereo CT14 bluetooth audio receiver with 2x5W amplifier is a simple bluetooth module with which audio can be played via bluetooth from, for example, a laptop or phone on the audio pins that are present on this board.
This module does not need ..
€4.00
Ex Tax:€3.31
Model: BTAUDIORECEIVER-MH-M38
This MH-M38 Bluetooth audio receiver with 2x5W amplifier is a simple Bluetooth module with which audio can be played via Bluetooth from, for example, a laptop or telephone. The audio is outputted the audio pins that are present on the board. It is al..
€4.50
Ex Tax:€3.72
Model: SWPAM8406VC
Suited for small, medium and even large speakers! A power of 6W might not seem as a lot, but if you use 5.5V a set of 2 Ohm speakers, this board can deliver quite some sound! The board is based on the Class-D audio amplifier principle and is therefor..
€4.75
Ex Tax:€3.93
Model: PAM8610
This is an incredibly powerful amplifier for its size. Partly due to the separate class-D design of PAM (Power Analog Microelectronics), which means that no coils are needed, it can be built in almost anywhere. You can control the volume with the pot..
€8.00
Ex Tax:€6.61
Model: PAM8610PRINTV2
This incredibly powerful amplifier is only 29mm x 25mm x 2.5mm!
This is due to the special class-D design of Power analog microelectronics which means no coils are required.
This makes it possible to build it in almost everywhere.
It is also equ..
€5.00
Ex Tax:€4.13
Model: ZXACC-EXTSG-V12
An audio amplifier module that can be placed as a shield on the Smart Panlee 7 inch Serial Screen.
Note: No cables are included, they can be ordered separately here:
Molex Picoblade (compatible) cable 2p (for connecting speaker)
Molex..
€3.50
Ex Tax:€2.89
Model: TDA2030DIYKIT
With this do-it-yourself kit based on the TDA2030 chip you can make your own amplifier!
Specifications:
Voltage: 9-15VDC
TDA2030 chip
Speaker impedance: 4 to 8 ohms
Output power: 2x 14W (with 4 ohm speakers), 2x 9W (with 8 ohm sp..
€6.00
Ex Tax:€4.96
On request
Model: TDA74982X100W
The TDA7498 chip has long been a player on the market of Class-D amplifiers. This standard variant of the TDA7498 chip is the version with a maximum of 2x 100W stereo output (at 6 Ohm). This amplifier is quite powerful. This requires a large battery ..
€18.00
Ex Tax:€14.88
Model: TDA7498E2X160W
The TDA7498E chip has long been a player on the market of Class-D amplifiers. The "E" variant of the TDA7498 chip is the most powerful version of this chip with up to 2x 160W stereo or 1x 220W mono output.
This amplifier is incredibly powerful. This..
€30.00
Ex Tax:€24.79
On request
Model: TEENSYPROPSHIELD
With this shield for Teensy 3.2 and Teensy LC you expand the microcontroller with the following features:
Accelerometer (FXOS8700)
Gyroscope (FXAS21002)
Air pressure sensor and altimeter (MLP3115)
8MB Flash memory
Fast LED driver
2W A..
€20.50
Ex Tax:€16.94
Model: TEENSYPROPSHIELDLC
With this shield for Teensy 3.2 and Teensy LC you expand the microcontroller with the following features:
8MB Flash memory
Fast LED driver
2W Audio amplifier (LM48310)
For more information, see the following page: Prop Shield With..
€10.00
Ex Tax:€8.26
Model: TPA3116SUB
This TPA3116 amplifier is the mono version of the TPA3116 2x50W Audio amplifier and is ideal for a subwoofer.
Specifications:
Works between 12V and 24V DC (many combinations possible)
Very new and advanced chip from Texas Instrumen..
€12.00
Ex Tax:€9.92
Model: TPA3116BASSTREBLE-2.1
This 2.1 TPA3116 amplifier can supply up to 50W with two channels and a channel up to 100W. The format is still relatively compact and is ideal for crate and crate radio devices that also have an extra subwoofer speaker.
Specifications:
Works ..
€22.00
Ex Tax:€18.18
Model: TPA3116BT5.0-2.1
This 2.1 TPA3116 amplifier with Bluetooth 5.0 can supply up to 50W on two channels and one channel up to 100W. The size is still relatively compact and is ideal for crate radios that also have an extra subwoofer speaker.
Specifications:
..
€24.00
Ex Tax:€19.83
Model: TPA3116
This TPA3116 amplifier has the same compact size as the TA2024 and is therefore very suitable for crate radio's/DIY Boomboxes! The main difference is the power of this amplifier. Besides the huge power, this amplifier is suited for 5V, 12V and even 2..
€14.00
Ex Tax:€11.57
Model: TPA3116BT4.2BMT
This 2.1 TPA3116 amplifier with Bluetooth 4.2 can supply up to 50W on two channels. The size is relatively compact and is ideal for crate radios.
Specifications:
Works between 12V and 24V DC
Bluetooth 4.2 with approx. 8m range
Ve..
€18.00
Ex Tax:€14.88
Discontinued
Model: TPA3116BT5.0FMUSBSD
This TPA3116 amplifier with Bluetooth 5.0 and various other functions can deliver up to 50W on two channels. The format is relatively compact and is ideal for in crate and crate radio devices.
Specifications:
Works between 10V and 24V DC&n..
€16.00
Ex Tax:€13.22
Model: TPA3116BT4.0
This TPA3116 amplifier has about the same compact size of the TA2024 and is therefore ideal for in crate and crate radio and the like!
There is, however, a big difference between, and that is the power of this amplifier of course.
In addition to it..
€20.00
Ex Tax:€16.53
Unknown
Model: TPA3116BASSTREBLE
This TPA3116 amplifier also has a bass, midtone and treble control. It's a bit bigger than our normal TPA3116 amplifier and the TA2024, but it's still ideal for a crate radio etc.!
We recommend our 24V power supply to get the most out of the ampl..
€17.00
Ex Tax:€14.05
Model: TPA3118-2X30W
This amplifier based on the TPA3118 chip can deliver up to 2x30W with two channels and is ideal for box and crate radios!..
€11.00
Ex Tax:€9.09
Model: SW-HF220-V1.0
This amplifier based on the TPA3118 chip can deliver up to 2x30W with two channels and is ideal for box and crate radios!..
€11.50
Ex Tax:€9.50
Model: SH-AUDIO-I2S
An audio shield for the TinyPICO, TinyS2/S3/C6 or ProS3 development boards. The shield contains an internal buzzer and can be connected to an external speaker, adjustable via the switch. Furthermore, the shield has an SD card slot and a connector for..
€13.00
Ex Tax:€10.74
Model: WS-18833
A USB sound card with amplifier, ideal for connecting a small speaker to your PC or Raspberry Pi. Because the module uses the standard USB Audio protocol, no driver needs to be installed. The module is plug-and-play in combination with the following ..
€8.50
Ex Tax:€7.02
2-4 Weeks
Model: WS-15668
Brand: Waveshare
With this audio HAT from Waveshare it is possible to easily connect a speaker or headphones to a Raspberry Pi. In addition, stereo sound can also be recorded with the built-in microphones.
Specifications:
Supply voltage: 5V DC
Signal volta..
€20.00
Ex Tax:€16.53
Showing 1 to 31 of 31 (1 Pages)