TDA7498 2x100W Audio Amplifier

The TDA7498 chip has long been a player on the market of Class-D amplifiers. This standard variant of the TDA7498 chip is the version with a maximum of 2x 100W stereo output (at 6 Ohm). This amplifier is quite powerful. This requires a large battery or power supply that can provide sufficient power and voltage. This makes this amplifier less suitable for case and crate radio devices.

Specifications:

• Works between 15V and 34V DC (34V 6.5A recommended)
• Cooling block for optimum cooling
• Works with impedances between 6 and 8 ohms (8 Ohms recommended)
• Potentiometer present (for volume control only, the potentiometer has no built-in switch)
• RCA audio input
• 3 Pins audio input (cable not included)
• Amplification adjustable in 4 steps with two dip switches (see image for explanation)
• Thermal protection for overheating
• Reverse polarity protection with a diode
• Protection against too high currents (short circuit)
• LED at power connector indicating the status of the amplifier (on/off)
• 2x 100W @ 34V 6.5A (6 Ohm)
• 2x 75W @ 28V 6A (6 Ohm)
• 2x 80W @ 34V 5.5A  (8 Ohm)
• 2x 50W @ 25V 4.5A  (8 Ohm)
• Dimensions: 90mm x 64mm x 23mm

Note: We do not recommend using this amplifier in combination with 4 Ohm speakers. The components on the amplifier are calculated on 6 and 8 Ohm speakers.

Additional information: Datasheet TDA7498

What do you get:
1x TDA7498 2x100W Audio Amplifier