Model: M5STACK-C008-C
Brand: M5Stack
The Atom Echo from M5Stack is a compact development board based on an ESP32 chipset. Among other things, it has Wi-Fi and Bluetooth. In addition, this module also has a built-in push button, microphone and speaker.
The board has a USB-C connection..
€15.50
Ex Tax:€12.81
Model: M5STACK-C008
Brand: M5Stack
The Atom Lite from M5Stack is a compact development board based on an ESP32 chipset. It includes, amongst other things, Wi-Fi, Bluetooth and a built-in push button.
The board has a USB-C connection with which it can be programmed and/or powe..
€10.50
Ex Tax:€8.68
Model: M5STACK-C008-B
Brand: M5Stack
The Atom Matrix from M5Stack is a compact development board based on an ESP32 chipset. It includes, amongst others, WiFi, Bluetooth and a LED matrix with a built-in push button.
The board has a USB-C connection with which it can be programme..
€16.50
Ex Tax:€13.64
Model: M5STACK-C123
Brand: M5Stack
M5Stack's Atom S3 is a compact microcontroller with ESP32-S3 chip, 0.85 inch display, accelerometer and gyroscope...
€17.00
Ex Tax:€14.05
Model: M5STACK-C124
Brand: M5Stack
M5Stack's Atom S3 is a compact microcontroller with ESP32-S3 chip, infrared emitter and programmable buttons...
€11.00
Ex Tax:€9.09
Model: M5STACK-K024-B
Brand: M5Stack
This is an extensive M5Stack experiment kit with many different modules.
This kit includes the M5Core. Furthermore, there are motors, sensors and many more modules all bundled on a large printed circuit board.
With the included DuPont cables you..
€180.00
Ex Tax:€148.76
New
Model: BTT-PI4B-ADAPTER-V1.0
An adapter board for the Raspberry Pi CM4 or CB1 board from BigTreeTech to a RPi 4B layout.
The adapter board has a 40-pin GPIO header, multiple USB en Micro HDMI ports, a Micro-SD card slot and Ethernet connector.
This board also includes CSI..
€18.00
Ex Tax:€14.88
Model: BC-110990844
These are the standard coreless DC motors used for the Crazyflie 2.1 DIY drone. Of course, these motors can also be used for other purposes...
€13.00
Ex Tax:€10.74
Model: BC-114990121
This is the standard battery holder deck used in the Crazyflie 2.1 DIY drone.
Package contents:
1x Battery Holder Deck..
€6.00
Ex Tax:€4.96
Model: BC-114993410
The Crazyflie 2.1 Brushless is a versatile open source drone development platform that weighs only 37 grams and fits in the palm of your hand. In addition, this 2.1 Brushless version is equipped with brushless motors giving it higher payload, ag..
€499.00
Ex Tax:€412.40
Model: BC-114993295
The Crazyflie 2.1+ is a versatile open source drone development platform that weighs only 27 grams and fits in the palm of your hand. In addition, the 2.1+ version has an improved battery and propellers that allow you to fly up to 15% longer.
Not ..
€255.00
Ex Tax:€210.74
Model: BC-114993067
Crazyradio 2.0 is an open USB radio dongle with long range...
€45.00
Ex Tax:€37.19
Model: BC-114992766
This is the standard Li-Po battery for the Crazyflie 2.1 DIY drone is used. Of course, this battery can also be used for other purposes.
Note: Before connecting, always check that the polarity of the battery plug matches the polarity of the connec..
€8.00
Ex Tax:€6.61
Model: BC-110990444
These are the motor mounts for the standard 7mm coreless DC motors used for the Crazyflie 2.1 DIY drone.
Package contents:
4x Motor mount..
€10.00
Ex Tax:€8.26
Model: BC-110990162
These are the propellers for the standard 7mm coreless DC motors used for the Crazyflie 2.1 DIY drone.
Package contents:
4x Propeller CW (clockwise)
4x Propeller CCW (counterclockwise)..
€8.00
Ex Tax:€6.61
Model: BC-114991425
This is a spare parts bundle for the Crazyflie 2.1 DIY drone. This bundle is ideal for making sure you always have spare parts in case something needs to be replaced.
Package contents:
2x 7mm Coreless DC Motor
8x Motor Mount for 7mm Corele..
€25.00
Ex Tax:€20.66
Model: M5STACK-U006
Brand: M5Stack
This is an expansion hub unit for multiple Grove connections for M5Stack.
Note: Data transfer when connecting multiple I2C slave units/modules with the same address can cause problems...
€4.25
Ex Tax:€3.51
Model: M5STACK-A138
Brand: M5Stack
These headers feature a pitch of 1.27mm they are specifically designed to integrate with an M5Stamp S3...
€4.50
Ex Tax:€3.72
Model: M5STACK-A073
Brand: M5Stack
This M5Stack RFID card is compatible with S50 Mifare readers.
Specifications:
Operating frequency: 13.56MHz
Storage: 1KB
Detection distance: <10mm (depending on the reader)
Operating temperature: -20 - 50°C
Dimensions: 85.5 x 54 x..
€3.00
Ex Tax:€2.48
Model: M5STACK-U080
Brand: M5Stack
The 18650C Hat is a base with a built-in 2000mAh Li-ion battery for the M5StickC*. This provides the M5StickC with a much larger battery capacity. The module is built in such a way that another Hat can be placed on it. The battery can be charged via ..
€10.00
Ex Tax:€8.26
Model: M5STACK-M124
Brand: M5Stack
A relay module from M5Stack that is suitable for switching mains voltage...
€15.00
Ex Tax:€12.40
Model: M5STACK-A088-A
Brand: M5Stack
A cable and connector set from M5Stack which is well suited for serial communication such as RS232 or RS485 due to the shielding...
€4.50
Ex Tax:€3.72
2-4 Weeks
Model: M5STACK-U003
Brand: M5Stack
This is a LED module with 3 RGB LEDs and a Grove connection for the M5Stack.
Specifications:
3 Individually programmable RGB LEDs
2x LEGO® compatible holes
2x Grove connection (1x Grove cable included)
Package content:
..
€6.50
Ex Tax:€5.37
Model: M5STACK-M121-V11
Brand: M5Stack
A relay module from M5Stack with 4 channels. The relays are controlled via an STM32F030 microcontroller, which in turn can be controlled by an M5Core via I2C...
€14.00
Ex Tax:€11.57
Model: M5STACK-U097
Brand: M5Stack
A relay module for M5Stack products.
Specifications:
Relay:
Maximum switching voltage: 250V AC or 28V DC
Maximum switching current:
Resistive load: 10A
Number of channels: 4
Communication: I2C
I2C ad..
€16.50
Ex Tax:€13.64
Model: M5STACK-A071
Brand: M5Stack
The M5Stack 485T is a T-shape connector for RS485 communication with two detachable 4-pins terminal blocks and a 4-pins terminal plug. This module connects multiple devices to the same RS485 bus. Many M5Stack products are compatible with this connect..
€3.75
Ex Tax:€3.10
Model: M5STACK-M138
Brand: M5Stack
The 4EncoderMotor Module is a 4-channel DC motor driver module from M5Stack. The motor voltage can be selected via a switch so that it is either 5V (max 10W total) or equal to the supply voltage. The module also contains an extra voltage converter th..
€17.50
Ex Tax:€14.46
Model: M5STACK-M122
Brand: M5Stack
This M5Stack 4IN8OUT module can switch 8 different things with the built-in MOSFETS. In addition, the module also has 4 connectors to connect passive pressure switches...
€21.00
Ex Tax:€17.36
Model: M5STACK-U125
Brand: M5Stack
This is a buck converter module with a DC jack and a Grove connection from M5Stack.
Specifications:
Input voltage: 6 - 24V DC
Output voltage: 5V DC
Maximum output current: 1A
Chip: ME3116AM6G
Type: Non-isolated buck (step-down)
Con..
€5.50
Ex Tax:€4.55
Model: M5STACK-U154
Brand: M5Stack
A module from M5Stack with 8 potentiometers that can be read out via I2C...
€14.00
Ex Tax:€11.57
Model: M5STACK-U165
Brand: M5Stack
The 8Servos Unit from M5Stack is a powerful servo driver for 8 servos where the power consumption of the servos (combined) can be measured. It is controlled by an STM32F030F4 microcontroller and uses I2C communication. The unit is ideal for robotics ..
€9.00
Ex Tax:€7.44
