Model: BME280MOD
A very compact barometer that works with I2C or SPI. The BME280 is an 3-in-1 module that can measure temperature, pressure and humidity.
For more information see the datasheet under the tab "Downloads".
The module can only be powered with..
€5.50
Ex Tax:€4.55
Model: BME280LVLCNV
A very compact barometer that works with I2C. The BME280 is an 3-in-1 module that can measure temperature pressure and humidty
For more information see the datasheet under the tab "Downloads".
This version includes a level converter and voltage..
€6.50
Ex Tax:€5.37
Model: BME680LVLCNV
This module has four sensors in one that can measure temperature, air pressure, humidity and air quality. The module has a built-in level converter making it easy to use with both 3.3V and 5V microcontrollers.
Specifications:
Supply voltage:..
€11.00
Ex Tax:€9.09
On request
Model: BMP180
A very compact barometer that works with I2C. The BMP180 is the better successor of the BMP085.
The module can be supplied through the VCC pin with 3.3V or 5V. It also has a 3.3V output ("3.3" pin). The I2C only works with 3.3V and needs a level s..
€4.00
Ex Tax:€3.31
Model: BMP280
A very compact barometer that works via I2C or SPI. The BMP280 is the better successor to the BMP180 with buildin temperature sensor and pressure sensor.
For more information see the datasheet under the tab "Downloads".
The module can only be f..
€4.00
Ex Tax:€3.31
Model: BMP388
A very compact temperature and air pressure sensor (barometer). The BMP388 is the successor to the BMP280. The module has a built-in level converter making it easy to use with both 3.3V and 5V microcontrollers.
Specifications:
Supply voltage..
€7.50
Ex Tax:€6.20
New
Model: DFROBOT-SEN0372
Brand: DFRobot
A compact BMP280 barometer and temperature sensor from DFRobot...
€6.75
Ex Tax:€5.58
Model: GY-MS5803-01BA
A very compact barometer and temperature sensor in one. The sensor chip is designed to perform underwater measurements and is therefore waterproof on top (note: the PCB itself is not water resistant).
See the following page for an Arduino IDE libr..
€15.50
Ex Tax:€12.81
Model: GY-MS5803-14BA
A very compact barometer and temperature sensor in one. The sensor chip is designed to perform underwater measurements and is therefore waterproof on top (note: the PCB itself is not water resistant).
See the following page for an Arduino IDE libr..
€21.50
Ex Tax:€17.77
Model: GY-MS5837-02BA
A very compact barometer and temperature sensor in one. The sensor chip is designed to perform underwater measurements and is therefore waterproof on top (note: the PCB itself is not water resistant). The built-in level converter makes it suitable fo..
€12.50
Ex Tax:€10.33
Model: GY-MS5837-30BA
A very compact barometer and temperature sensor in one. The sensor chip is designed to perform underwater measurements and is therefore waterproof on top (note: the PCB itself is not water resistant). The built-in level converter makes it suitable fo..
€18.00
Ex Tax:€14.88
Model: M5STACK-U090
Brand: M5Stack
This is a barometric air pressure sensor module with a Grove connection for M5Stack. The module works via I2C communication.
Specifications:
Sensor: BMP280
Measuring range air pressure: 300-1100hPa
Air pressure resolution: 0.16hPa
..
€6.00
Ex Tax:€4.96
Model: M5STACK-U053-D
Brand: M5Stack
Note: When the ENV Hat is used in combination with an M5Stick that is continuously on or being charged, it is possible that the temperature read out is higher than reality. This is due to heat development of the (charging) chip of the M5Stick...
€15.50
Ex Tax:€12.81
On request
Model: M5STACK-U001-C
Brand: M5Stack
The ENV III Unit is an upgrade of the ENV II and ENV Unit. This module has a temperature, humidity and air pressure sensor with a Grove connection for M5Stack.
The difference between the ENV III Unit and the ENV II Unit is that this one uses the Q..
€7.75
Ex Tax:€6.41
Model: M5STACK-U001-D
Brand: M5Stack
The ENV IV Unit uses the BMP280 air pressure sensor, and the more accurate SHT40 (compared to the SHT30 on previous versions of the ENV Unit)...
€6.50
Ex Tax:€5.37
Model: M5STACK-U169
Brand: M5Stack
The ENV Pro Unit is a compact environmental sensor using the BME688 sensor. It measures air quality, temperature, humidity, and atmospheric pressure...
€23.00
Ex Tax:€19.01
Model: M5STACK-M135
Brand: M5Stack
A GNSS module from M5Stack that also has various sensors. The module is made for the M5Core, there is optional space for an M5Stamp module for extra connectivity...
€56.00
Ex Tax:€46.28
Model: M5STACK-U171
Brand: M5Stack
The IMU Pro Mini Unit from M5Stack contains various sensors to measure movement and the environment...
€9.00
Ex Tax:€7.44
2-4 Weeks
Model: RAK-100010
Een barometric pressure sensor module from RAKwireless for the modular WisBlock system...
€6.00
Ex Tax:€4.96
Model: RAK-100008
A sensor module from RAKwireless based on a BM680...
€16.00
Ex Tax:€13.22
Model: RPISENSEHAT
The Sense HAT is an extensive module with numerous sensors made for a Raspberry Pi single board computer (SBC)...
€35.00
Ex Tax:€28.93
New
Model: RPISENSEHATV2
The Sense HAT is an extensive module with numerous sensors made for a Raspberry Pi single board computer (SBC). This V2 version has an additional light (color) sensor.
Note: Because the PCB becomes warm, the temperature sensors will not accurately..
€39.75
Ex Tax:€32.85
Model: WS-20232
Brand: DFRobot
This environment sensor module from Waveshare is made for the Raspberry Pi Pico or other microcontrollers that use the same pin layout. This allows you to measure movement, temperature, humidity, light and air quality.
Note: No Raspberry Pi Pico i..
€35.00
Ex Tax:€28.93
-for-raspberry-pi-default-600x600.jpg "Waveshare Sense HAT (B) for Raspberry Pi")
Model: WS-16864
Brand: Waveshare
With this HAT you provide your Raspberry Pi with various sensors that communicate via I2C. The HAT is designed for the Raspberry Pi Zero, but also works with other models. In addition, the module can also be used with other microcontrollers such as a..
€36.50
Ex Tax:€30.17
Model: WMD1MHP303B
A barometric module/shield for the Wemos D1 Mini.
Works with I2C interface. Module can measure temperature and pressure.
Specifications:
Measuring range pressure: 300-1200 hPa
Measurement range temperature: -40-85 °C
Precision pres..
€3.50
Ex Tax:€2.89
Showing 1 to 31 of 31 (1 Pages)