Model: DRAGINO-LSN50V2-8-868M16
Dragino's LSN50 is a long-range LoRa sensor node. It is designed for outdoor use and is powered by a built-in Li/SOCl2 battery for long life.
Note: The network keys can be found in the box. This product cannot therefore be returned if the packagin..
€65.00
Ex Tax:€53.72
New
Model: HTCC-AB02S-HF
The CubeCell is a compact, Arduino-compatible LoRaWAN development board with support for Li-ion/Li-Po powering and charging. This version has a built-in Air530Z GNSS (GPS) module. In addition, the board has an OLED display and you can directly connec..
€25.50
Ex Tax:€21.07
Model: HTCC-AB02
The CubeCell is a compact, Arduino-compatible LoRaWAN development board with support for Li-ion/Li-Po powering and charging. In addition, you can directly connect a solar panel for both powering the board and charging the Li-ion/Li-Po battery...
€19.50
Ex Tax:€16.12
Model: HTCC-AB01_V2-868MHZ
The CubeCell is a compact, Arduino-compatible LoRaWAN development board with support for Li-ion/Li-Po powering and charging. In addition, you can directly connect a solar panel for both powering the board and charging the Li-ion/Li-Po battery...
€17.50
Ex Tax:€14.46
New
Model: HT-N5262-HF
The Mesh Node T114 is an energy-efficient development board based on the nRF52840 microcontroller and an SX1262 LoRa module...
€34.50
Ex Tax:€28.51
Model: HT-SUFFICIENTIOHUB-HF
The Sufficient IoT Hub from Heltec is a development board with, among other things, LoRa connectivity that runs on a Linux distribution...
€37.50
Ex Tax:€30.99
Model: HT-VME213-HF
Heltec's Vision Master is a versatile development board based on the ESP32-S3. The microcontroller is compatible with Arduino, PlatformIO and MicroPython and supports Bluetooth, Wi-Fi and LoRa. This makes it ideal for developing electronic tags and o..
€23.00
Ex Tax:€19.01
Model: HT-VME290-HF
Heltec's Vision Master is a versatile development board based on the ESP32-S3. The microcontroller is compatible with Arduino, PlatformIO and MicroPython and supports Bluetooth, Wi-Fi and LoRa. This makes it ideal for developing electronic tags and o..
€24.00
Ex Tax:€19.83
Model: HT-VMT190-HF
This Heltec Vision Master T190 is a microcontroller based on an ESP32-S3 with a built-in IPS-TFT display and a LoRa module. The microcontroller is compatible with Arduino, PlatformIO and MicroPython and supports Bluetooth and Wi-Fi...
€21.00
Ex Tax:€17.36
Model: HTIT-WB32LAF_V3.1-433MHZ
This Heltec microntroller board has an OLED screen and supports both Wi-Fi, Bluetooth and LoRa (433MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po ..
€23.50
Ex Tax:€19.42
2-4 Weeks
Model: HTIT-WB32LA_V3-868MHZ
This Heltec microntroller board has an OLED screen and supports both Wi-Fi, Bluetooth and LoRa (868MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po ..
€22.00
Ex Tax:€18.18
New
Model: HT-WIRELESSPAPER433
This E-Ink display from Heltec has an ESP32-S3 and can be connected via Bluetooth, Wi-Fi and LoRa...
€19.00
Ex Tax:€15.70
Model: HT-WIRELESSPAPER868
The Wireless Paper from Heltec is based on an ESP32-S3 microcontroller with an E-paper/E-ink screen. The USB to serial converter makes it easy to program, also like an Arduino. The board has a USB-C connection with which it can be programmed and/or p..
€19.00
Ex Tax:€15.70
Model: HTIT-WSL-HF_V3
This Heltec microntroller board has many IO pins, and supports both Wi-Fi, Bluetooth and LoRa (868MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po p..
€19.50
Ex Tax:€16.12
New
Model: HTIT-WS-HF_V3
This Heltec microntroller board has many IO pins, and supports both Wi-Fi, Bluetooth and LoRa (868MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po p..
€21.50
Ex Tax:€17.77
Model: HT-WIRELESS-TRACKER-HF
A development board from Heltec based on ESP32-S3 which also goes by the name of HTIT-Tracker. This board supports Wi-Fi, Bluetooth, LoRa and GNSS. Furthermore, the board features a TFT display and Li-ion/Li-Po powering and charging. The board has a ..
€24.50
Ex Tax:€20.25
Model: LILYGO-Q310
The TTGO LoRa32 from LilyGO is a microcontroller based on an ESP32 with a built-in LoRa chip and an OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be prog..
€20.00
Ex Tax:€16.53
Model: LILYGO-H496
..
€34.00
Ex Tax:€28.10
Model: LILYGO-Q402
The T-Beam from LilyGO is a microcontroller based on an ESP32 including a built-in LoRa chip and a GNSS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be progra..
€40.00
Ex Tax:€33.06
Model: LILYGO-Q391
The T-Beam from LilyGO is a microcontroller based on an ESP32 including a built-in LoRa chip and a GNSS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be progra..
€40.50
Ex Tax:€33.47
Model: LILYGO-Q389
The T-Beam from LilyGO is a microcontroller based on an ESP32 including a built-in LoRa chip and a GNSS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be progra..
€34.75
Ex Tax:€28.72
Model: LILYGO-H616
The T-Beam-S3 from LilyGO is a microcontroller based on an ESP32-S3 including a built-in LoRa chip, a GNSS module and several sensors.
The T-Beam can also be use with the SoftRF software: SoftRF..
€53.00
Ex Tax:€43.80
Model: LILYGO-H615
The T-Beam-S3 from LilyGO is a microcontroller based on an ESP32-S3 including a built-in LoRa chip, a GNSS module and several sensors.
The T-Beam can also be use with the SoftRF software: SoftRF..
€84.00
Ex Tax:€69.42
Model: LILYGO-H623
T-Deck is a development board based on an ESP32-S3 microcontroller. The keyboard and LoRaWi-Fi/Bluetooth connectivity make it very suitable for sending messages wirelessly.
Note: Unlike most Grove products, the Grove connector on the T-Deck has a ..
€73.00
Ex Tax:€60.33
Model: LILYGO-K146
A wristband based on an S78G System in Chip (SiP) that integrates a number of chips into one, including a microcontroller, LoRa chip and GNSS (GPS) chip.
Note: The same wristband is used as for the TTGO T-Wristband modules, however, this product i..
€41.00
Ex Tax:€33.88
Model: LILYGO-K215
The T-Watch S3 from LilyGO is a development smartwatch based on an ESP32-S3 microcontroller. The watch has numerous sensors and in addition to Wi-Fi and Bluetooth, this watch also supports LoRa...
€56.50
Ex Tax:€46.69
Model: LILYGO-K214
The T-Watch S3 from LilyGO is a development smartwatch based on an ESP32-S3 microcontroller. The watch has numerous sensors and in addition to Wi-Fi and Bluetooth, this watch also supports LoRa...
€55.00
Ex Tax:€45.45
Model: LILYGO-H658
A 2.4GHz LoRa development board from LilyGO based on ESP32-S3 with built-in 0.96 inch OLED display.
Note: In this version of the board, the LoRa chip has a Power Amplifier (PA). The software setting for the transmitting power cannot exceed 5dBm, o..
€30.00
Ex Tax:€24.79
Model: LILYGO-H595
A LoRa development board of LilyGO including a 0.96 inch OLED display...
€23.00
Ex Tax:€19.01
Model: LILYGO-K183
The LilyGO T-Echo is a microcontroller based on an nRF52840. The T-Echo includes a LoRa chip, GNSS module, E-Paper display and battery. The module has a USB-C connector with which it can be programmed (e.g. via the Arduino IDE) and/or powered (USB-C ..
€80.00
Ex Tax:€66.12
Model: LILYGO-H512
The LilyGO T-Echo is a microcontroller based on an nRF52840. The T-Echo includes a LoRa chip, GNSS module, E-Paper display and battery. The module has a USB-C connector with which it can be programmed (e.g. via the Arduino IDE) and/or powered (USB-C ..
€80.00
Ex Tax:€66.12
Model: LILYGO-K151
A wristband based on an S76G System in Chip (SiP) that integrates a number of chips into one, including a microcontroller, LoRa chip and GNSS (GPS) chip.
Note: The same wristband is used as for the TTGO T-Wristband modules, however, this product i..
€49.00
Ex Tax:€40.50
Model: LILYGO-H522
The TTGO T-Weigh is a microcontroller based on an ESP32 with HX711 load cell amplifiers to which four load cells can be connected. This module also has the option to communicate via LoRa.
Note: This board does not have a built-in USB to serial con..
€24.00
Ex Tax:€19.83
Model: LILYGO-Q134
The TTGO LoRa32 from LilyGO is a microcontroller based on an ESP32 with a built-in LoRa chip and an OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be prog..
€18.75
Ex Tax:€15.50
Model: LILYGO-Q213
The TTGO T3 LoRa32 from LilyGO is a microcontroller based on an ESP32 with a built-in SX1276 LoRa chip and a 0.96 inch OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with w..
€22.00
Ex Tax:€18.18
Model: RAK-115004
The RAK13300 is a LoRa/LoRaWAN communication module from RAKwireless for the modular WisBlock platform, based on the RP2040 microcontroller and the SX1262 LoRa transceiver...
€12.50
Ex Tax:€10.33
Model: RAK-115012
The RAK13300 is a LoRa/LoRaWAN core module from RAKwireless for the modular WisBlock platform, based on the STM32WLE5CCU6...
€12.00
Ex Tax:€9.92
2-4 Weeks
Model: RAK-115000
The RAK4631 is a module from RAKwireless for the modular WisBlock platform. This Core module is based on the nRF52840 and SX1262 chips. The module supports BLE 5.0 and LoRa...
€19.00
Ex Tax:€15.70
2-4 Weeks
Model: SEEED-114993070
The SenseCAP Indicator is a development board based on an ESP32-S3 and an RP2040 microcontroller. The module has, among other things, a built-in display with touchscreen and Grove ports for connecting sensors. Also, the D1L variant can connect to oth..
€65.00
Ex Tax:€53.72
Showing 1 to 39 of 39 (1 Pages)