Heltec Mesh Node T114 Rev. 2.0 - nRF52840 - SX1262 LoRa 868MHz - with 1.14 inch TFT Display
- Availability: Directly available from warehouse in Eindhoven
- SKU: 006653
€34.50
Ex Tax: €28.51
The Mesh Node T114 is an energy-efficient development board based on the nRF52840 microcontroller and an SX1262 LoRa module.
See the following page for more information: Manufacturer page
Reviews Over Heltec Mesh Node T114 Rev. 2.0 - nRF52840 - SX1262 LoRa 868MHz - with 1.14 inch TFT Display
This product has 0 review(s) in total.
Report this review.
Tags:
Microcontroller Boards
, With Bluetooth
, Heltec Mesh Node T114 Rev. 2.0 - nRF52840 - SX1262 LoRa 868MHz - with 1.14 inch TFT Display
, 006653
, Heltec
, HT-n5262-HF
, Battery charger
, Display
, Microcontroller (MCU)
, Programmable button(s)
, I2C
, I2S
, SPI
, Native USB
, UART
, PWM
, ADC
, GPIO
, USB CDC
, Comparator
, Bluetooth
, LoRa
Specifications
| General | |
| Brand | Heltec |
| Manufacturer model/SKU | HT-n5262-HF |
| Model revision | V2.0 |
| Minimum operating temperature [°C] | -20 |
| Maximum operating temperature [°C] | 70 |
| Features | Display Battery charger Microcontroller (MCU) Programmable button(s) |
| General physical appearance | |
| Main color | Black |
| Weight [g] | 10 |
| Dimension X [mm] | 52 |
| Dimension Y [mm] | 23 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 |
| Maximum supply voltage [V DC] | 5 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 14 |
| Maximum IO-pin sink current [mA] | 15 |
| MCU | |
| Manufacturer | Nordic Semiconductor |
| Chip series | nRF52840 |
| Maximum clock frequency [MHz] | 64 |
| Number of cores | 1 |
| Internal memory | |
| SRAM [KB] | 256 |
| Flash memory [MB] | 1 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC I2C I2S PWM SPI GPIO UART USB CDC Comparator Native USB |
| Number of IO-pins | 21 |
| Maximum available hardware PWM channels | 16 |
| Maximum available analog input pins (ADC) | 5 |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 2 |
| Maximum available hardware I2C interfaces | 2 |
| Maximum available hardware SPI interfaces | 2 |
| USB to serial converter | Integrated into microcontroller |
| Wireless communication | |
| Interface(s) | LoRa Bluetooth |
| Bluetooth chip/SoC | nRF52840 |
| Bluetooth version | 5.0 |
| Supported Bluetooth standard(s) | LE |
| LoRa chip/SoC | SX1262 |
| LoRa frequency [MHz] | 868 |
| Display | |
| Type | TFT |
| Driver | ST7789V2 |
| Screen diagonal [inch] | 1.14 |
| Number of pixels long side | 240 |
| Number of pixels short side | 135 |
| Display shape | Rectangular |
| Pixel colors | RGB |
| Battery circuit | |
| Battery charger chip/SoC | LGS4056H |
| Supported battery chemistry | Li-Po Li-ion |
| Maximum charging voltage [V] | 4.2 |
| Maximum charging current [mA] | 1000 |
| Adjustable charging current | No |
| Protection circuit | No |
| Connectors | |
| Power supply connector(s) | USB-C female Molex Picoblade (compatible) male Through hole solder pin(s) (2.54mm) |
| IO-connector(s) | USB-C female Molex Picoblade (compatible) male Through hole solder pin(s) (2.54mm) |
| Battery connector(s) | Molex Picoblade (compatible) male |
| Solar panel connector(s) | Molex Picoblade (compatible) male |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna |
| LoRa antenna connector | IPEX MHF 1/uFL male |
| Package contents | |
| Package contents | 1x Mesh Node T114 1x LoRa SMA antenna 868MHz 1x IPEX/uFL to SMA adapter cable 2x Male pin header 13p 2x Molex PicoBlade compatible cable 2p with loose wires |