Model: 52PI-EP-0141
This screw terminal breakout board is compatible with Raspberry Pi single board computers, and other single board computers or development boards with the standard 2x20p GPIO header...
€16.50
Ex Tax:€13.64
B-Stock
Model: B-STOCK-9IN1-SENSORSHIELD
..
€3.50
Ex Tax:€2.89
Model: BTT-PI4B-ADAPTER-V1.0
An adapter board for the Raspberry Pi CM4 or CB1 board from BigTreeTech to a RPi 4B layout.
The adapter board has a 40-pin GPIO header, multiple USB en Micro HDMI ports, a Micro-SD card slot and Ethernet connector.
This board also includes CSI..
€18.00
Ex Tax:€14.88
-wifi-module-600x600.jpg "Breakout Board for ESP-01(S)")
Model: BREAKOUT-ESP-01
This is a breakout board for an ESP-01(S) module with which it can easily be used on a breadboard, for example. The ESP-01 module must be mounted on the board in such a way that the 3.3V and RX pin are on the side of the capacitor.
Note: Moun..
€1.00
Ex Tax:€0.83
Model: 582693478794
This is a development board for the ESP32-WROOM Wi-Fi module. The ESP32-WROOM can easily be connected to this. With the help of this board, the module can be controlled and programmed without having to solder...
€9.50
Ex Tax:€7.85
Model: DEVBOARDEPS32WROVER
This is a development board for the ESP32-WROVER Wi-Fi module. The ESP32-WROVER can easily be connected to this. With the help of this board, the Wi-Fi module can be controlled and programmed without having to solder.
This board uses a CP2..
€9.50
Ex Tax:€7.85
Model: DEVBOARD-ESP8266
This is a development board for ESP8266 Wi-Fi modules. Using this board, the Wi-Fi module can be controlled and programmed without soldering.
Specifications:
Compatible ESP boards: ESP-01, ESP-01S, ESP-07, ESP-07S, ESP-12E, ESP-12F, ESP-12S ..
€10.50
Ex Tax:€8.68
Model: DFROBOT-DFR0270
Brand: DFRobot
There is no product description available yet. See the following page for information about this product: DFRobot Accessory Shield for Arduino
Note: Due to the PCB design, the relay cannot be used with mains voltage, use a maximum of 30V...
€25.50
Ex Tax:€21.07
Model: ESP32-CAM-MB
This is a shield that has been specially developed for the ESP32- CAM - Wi-Fi and Bluetooth Board with OV2640 Camera. The ESP32-CAM is a very handy module, but it lacks a USB connection that makes it easy to upload new code. Due to the USB connection..
€2.75
Ex Tax:€2.27
Model: JOYSTICKSHIELD
This shield has four handy buttons and a joystick. There are also pins available to easily connect your NRF24L01 or Bluetooth (HC-06) module to your Arduino.
Specifications:
Joystick with push button present in combination with four pushbutt..
€5.00
Ex Tax:€4.13
Model: KS0183
The Multi-purpose Shield V1 from Keyestudio is a learning board based on the Arduino...
€8.00
Ex Tax:€6.61
Model: KS0184
De Multi-purpose Shield V2 from Keyestudio is a learning board based on the Arduino...
€5.00
Ex Tax:€4.13
Model: KS0004
The Keyestudio Sensor Shield is compatible with the Arduino Uno, allowing you to use multiple sensors. The sensor shield also offers multiple 3-pin interfaces (G, V, S) for direct connection to 3-pin modules such as sensors or servos.
The V(cc) pi..
€5.00
Ex Tax:€4.13
Model: LILYGO-H610
LilyGO's TF (SD card) Shield is a shield suitable for LilyGO's T-Display series. This version has female pin headers, making it suitable for a T-Display with male headers...
€4.50
Ex Tax:€3.72
Model: LILYGO-H609
LilyGO's TF (SD card) Shield is a shield suitable for LilyGO's T-Display series. This version has male pin headers, making it suitable for a T-Display with female headers, or one without headers...
€4.50
Ex Tax:€3.72
Model: LILYGO-H547
A GPIO expansion module for the LilyGO T-ECHO
Note: This version comes without microphone and IMU...
€3.00
Ex Tax:€2.48
Model: LILYGO-H631
This is an expansion shield for the LilyGO T-FPGA...
€6.50
Ex Tax:€5.37
Model: M5STACK-A129
Brand: M5Stack
This Stamp S3 Breakout board is an expansion board designed specifically for the M5Stamp S3 with 1.27mm pin headers...
€2.50
Ex Tax:€2.07
Model: NANOEXPAN
A board to make the pins of an Arduino Nano slightly more accessible.
On the DC jack a voltage of 7-12V can be offered, up to 500mA current.
The Nano must be placed so that the USB connector of the Nano is on the same side as the DC jack connection..
€5.00
Ex Tax:€4.13
Model: OL-RP2040-PICO-PC
An adapter board for the Raspberry Pi Pico (or other microcontroller with the same pin layout). The board expands the Pico with, among other things, an HDMI connection, SD card adapter and Li-ion/Li-Po charging circuit...
€15.50
Ex Tax:€12.81
Model: OS-NANOIOEXPBOARD
This Open-Smart Nano IO Expansion Board is a shield for the Arduino (Or Arduino compatible) Nano, with which you can give the Nano an Uno layout. In addition to the Uno layout, all Digital I/O pins and Analog pins have an extra pin, and 5V and GND ha..
€6.00
Ex Tax:€4.96
Model: OPZEROEXPANSIONBOARD
Brand: Orange Pi
An expansion board Orange Pi Zero, with this expansion board the following components are added to your Orange Pi Zero:
2x USB 2.0 ports
1x 3.5 mm jack port (audio)
1x IR receiver
1x microphone
Dimensions: 41.5x39mm.
Also seperate..
€4.50
Ex Tax:€3.72
2-4 Weeks
Model: RAK-100029
An adapter module from RAKwireless for the modular WisBlock system with standard male pin headers...
€7.00
Ex Tax:€5.79
Model: RAK-110075
An adapter module from RAKwireless for the modular WisBlock system with a connector for a standard QWIIC (=STEMMA QT/JST-SH) interface...
€3.75
Ex Tax:€3.10
Model: RAK-110081
A base module from RAKwireless for the modular WisBlock platform. This module connects a WisBlock Core, 2 IO slots and up to 6 WisBlock sensor modules. Furthermore, it is also possible to connect a battery and a solar panel to the Base module...
€14.50
Ex Tax:€11.98
Model: RAK-110035
A base module from RAKwireless for the modular WisBlock platform. The WisBlock Mini Base board connects a WisBlock Core and up to 2 WisBlock Modules. Furthermore, it is also possible to connect a battery and a solar panel to the Base module...
€10.25
Ex Tax:€8.47
Model: RAK-110082
A base module from RAKwireless for the modular WisBlock platform...
€11.50
Ex Tax:€9.50
Model: RAK-110085
A base module from RAKwireless for the modular WisBlock platform. The WisBlock Mini Base board connects a WisBlock Core and up to 2 WisBlock Modules. This version has a power slot, making the module flexible in terms of power supply options.
Note:..
€9.25
Ex Tax:€7.64
Model: RAK-110086
A base module from RAKwireless for the modular WisBlock platform. This version has a power slot, making the module flexible in terms of power supply options...
€10.50
Ex Tax:€8.68
Model: RAK-110087
A base module from RAKwireless for the modular WisBlock platform. This module connects a WisBlock Core, 2 IO slots and up to 6 WisBlock sensor modules. This version also has a power slot which makes the module flexible in terms of power supply option..
€11.50
Ex Tax:€9.50
Model: RPIGPIOEXTBOARDKIT
A GPIO extension kit so you can easily use the Raspberry Pi pins on a breadboard.
The GPIO Extension Board has the pins in the same order as the Raspberry Pi and has pin indications on the GPIO extension board.
The kit consists of a 40-cm cable t..
€4.50
Ex Tax:€3.72
Model: RPISENSEHAT
The Sense HAT is an extensive module with numerous sensors made for a Raspberry Pi single board computer (SBC)...
€35.00
Ex Tax:€28.93
New
Model: RPISENSEHATV2
The Sense HAT is an extensive module with numerous sensors made for a Raspberry Pi single board computer (SBC). This V2 version has an additional light (color) sensor.
Note: Because the PCB becomes warm, the temperature sensors will not accurately..
€39.75
Ex Tax:€32.85
Model: SCREWSHIELDMEGASOLD
With this Screw Shield you can easily screw the wires to the pins on Mega-layout compatible boards.
All available pins on the screw terminals have a pin description on the PCB.
Dimensions: 120 x 77 x 11mm (height measured from bottom of PCB to to..
€10.50
Ex Tax:€8.68
Model: SCREWSHIELDMEGA
With this Screw Shield you can easily screw the wires to the pins on Mega-layout compatible boards.
All available pins on the screw terminals have a pin description on the PCB.
Dimensions (assembled): 120 x 77 x 11mm (height measured from bottom ..
€9.00
Ex Tax:€7.44
Model: SCREWSHIELDNANOSOLDERED
With this pre-soldered shield you can easily screw wires to the pins on boards with the form factor of an Arduino Nano. The pin descriptions are listed on the PCB.
Package contents:
1x Screw Terminal Shield..
€3.50
Ex Tax:€2.89
Model: SCREWBOARDNANO
With this Screw Board you can easily screw the wires to the pins on Nano-layout compatible boards.
All available pins on the screw terminals have a pin description on the PCB.
Note: This product still has to be soldered!
Note: The color of the..
€2.00
Ex Tax:€1.65
Model: SCREWSHIELDV2
With this Screw Shield you can easily screw the wires to the pins on Uno-layout compatible boards.
All available pins on the screw terminals have a pin description on the PCB.
Note: This board has the SDA and SCL pins as pins, but these are not c..
€5.00
Ex Tax:€4.13
Model: SEEED-103030000
With this shield for the Seeeduino/Arduino Uno you provide the microcontroller with 16 Grove connectors. With the Grove connectors other Seeed Studio modules can be easily connected.
Grove connectors types:
4x I2C Grove connector
1x UART&n..
€4.50
Ex Tax:€3.72
Model: SEEED-103030356
This Expansion Board for the Seeeduino XIAO provides the microcontroller with a variety of accessories. For example, the board has an OLED display, a buzzer and a microSD card adapter. In addition, the module also contains a connection for a Li-ion/..
€18.00
Ex Tax:€14.88