Heltec MeshPocket Qi2 Power Bank 5000mAh - nRF52840 - SX1262 LoRa 868MHz - Yellow
- Availability: Directly available from warehouse in Eindhoven
- SKU: 007642
€75.50
Ex Tax: €62.40
A development board from Heltec based on a nRF52840 microcontroller by Nordic Semiconductor. Things can be shown on the built-in E-paper display. For extra connectivity, the board has multiple wireless communication interfaces (including LoRa/Bluetooth). Finally, the board has a rechargeable Li-Po battery, which allows it to be used even when there's no power nearby.
Note: Wireless charging reduces the LoRa range.
See the following page for more information: Wiki
Check the tab "Downloads" for more information and/or downloads.
Reviews Over Heltec MeshPocket Qi2 Power Bank 5000mAh - nRF52840 - SX1262 LoRa 868MHz - Yellow
This product has 0 review(s) in total.
Report this review.
Tags:
Microcontroller Boards
, With LoRa
, Heltec MeshPocket Qi2 Power Bank 5000mAh - nRF52840 - SX1262 LoRa 868MHz - Yellow
, 007642
, Heltec
, HT-298A
, Display
, Microcontroller (MCU)
, Voltage converter
, Battery protection circuit
, Enclosure
, Battery
, Programmable button(s)
, Wireless power transfer
, Native USB
, USB CDC
, USB PD
, Bluetooth
, LoRa
Specifications
| General | |
| Brand | Heltec |
| Manufacturer model/SKU | HT-298A |
| Norm conformity | CE RoHS |
| Minimum operating temperature [°C] | -15 (discharging) 0 (charging) |
| Maximum operating temperature [°C] | 45 |
| Features | Battery Display Enclosure Voltage converter Microcontroller (MCU) Programmable button(s) Wireless power transfer Battery protection circuit |
| General physical appearance | |
| Main color | Yellow |
| Weight [g] | 154 |
| Dimension X [mm] | 102 |
| Dimension Y [mm] | 74 |
| Dimension Z [mm] | 13 |
| Water and dust protection | None |
| Mounting options | Magnets |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 |
| Maximum supply voltage [V DC] | 9 |
| Minimum recommended supply current [A] | 3 (@5V) 2.22 (@9V) |
| MCU | |
| Manufacturer | Nordic Semiconductor |
| Chip series | nRF52840 |
| Maximum clock frequency [MHz] | 64 |
| Number of cores | 1 |
| Internal memory | |
| SRAM [KB] | 256 |
| Flash memory [MB] | 1 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | USB PD USB CDC Native USB (Native USB and USB CDC only available via pogo pins) |
| Available GPIO pins | 0 |
| USB to serial converter | Integrated into microcontroller |
| Wireless communication | |
| Interface(s) | LoRa Bluetooth |
| Bluetooth chip/SoC | nRF52840 |
| Bluetooth version | 5.0 |
| Supported Bluetooth standard(s) | LE |
| LoRa chip/SoC | SX1262 |
| LoRa frequency [MHz] | 868 |
| Display | |
| Type | E-paper |
| Driver | SSD1680 |
| Screen diagonal [inch] | 2.13 |
| Number of pixels long side | 250 |
| Number of pixels short side | 122 |
| Display shape | Rectangular |
| Pixel colors | Black White |
| Voltage converter | |
| Voltage converter type | Boost |
| Conversion | DC-DC |
| Output voltage type | Variable (discrete) |
| Constant current function | No |
| Minimum output voltage [V DC] | 5 |
| Maximum output voltage [V DC] | 9 |
| Supported output voltages [V DC] | 5 9 |
| Maximum output current [A] | 3 (@5V) 2.22 (@9V) |
| Maximum output power [W] | 20 (@9V) 15 (@5V) |
| Wireless power transfer | |
| Protocol/standard | Qi2 |
| Maximum power [W] | 15 |
| Battery circuit | |
| Protection circuit | Yes |
| Safety features | Overcurrent Overvoltage Temperature Undervoltage Short circuit |
| Battery | |
| Chemistry | Li-Po |
| Rechargeable | Yes |
| Typical capacity [mAh] | 5000 |
| Nominal cell voltage [V] | 3.87 |
| Maximum cell voltage [V] | 4.4 |
| Connectors | |
| Power supply connector(s) | USB-C female |
| IO-connector(s) | Pogo pin(s) |
| Output voltage connector(s) | USB-C female |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna |
| LoRa antenna connector | Built-in antenna |
| Enclosure | |
| Material | ABS Toughened glass |
| Package contents | |
| Package contents | 1x MeshPocket Qi2 1x USB-C cable 1x Magnetic sticker 1x USB-A to pogo pin cable |