Heltec CubeCell LoRa Development Board - GNSS - 868MHz - with 0.96 inch OLED Display
- Availability: Directly available from warehouse in Eindhoven
- SKU: 006087
€24.50
Ex Tax: €20.25
The CubeCell is a compact, Arduino-compatible LoRaWAN development board with support for Li-ion/Li-Po powering and charging. This version has a built-in Air530Z GNSS (GPS) module. In addition, the board has an OLED display and you can directly connect a solar panel for both powering the board and charging the Li-ion/Li-Po battery.
See the following page for more information: Manufacturer page
Reviews Over Heltec CubeCell LoRa Development Board - GNSS - 868MHz - with 0.96 inch OLED Display
This product has 0 review(s) in total.
Report this review.
Tags:
Microcontroller Boards
, With LoRa
, Heltec CubeCell LoRa Development Board - GNSS - 868MHz - with 0.96 inch OLED Display
, 006087
, Heltec
, HTCC-AB02S-HF
, RTC
, Display
, Battery charger
, Digital LED(s)
, Microcontroller (MCU)
, ADC
, I2C
, PWM
, SPI
, GPIO
, UART
, USB CDC
, GNSS
, LoRa
Specifications
| General | |
| Brand | Heltec |
| Manufacturer model/SKU | HTCC-AB02S-HF |
| Model revision | V1.1 |
| Minimum operating temperature [°C] | -20 |
| Maximum operating temperature [°C] | 70 |
| Features | RTC Display Digital LED(s) Battery charger Microcontroller (MCU) |
| General physical appearance | |
| Main color | Black |
| Weight [g] | 10 |
| Dimension X [mm] | 56 |
| Dimension Y [mm] | 28 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 4.7 (via USB-C/Vin) 5.5 (via Vs (solar panel)) |
| Maximum supply voltage [V DC] | 7 (via Vs (solar panel)) 6 (via USB-C/Vin) |
| Indication (deep-)sleep current [μA] | 21 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| MCU | |
| Manufacturer | ASR |
| Chip series | ASR6502 |
| Maximum clock frequency [MHz] | 48 |
| Number of cores | 1 |
| Internal memory | |
| SRAM [KB] | 16 |
| Flash memory [MB] | 0.128 |
| Communication | |
| Hardware interface(s) | ADC I2C PWM SPI GPIO UART USB CDC |
| Number of IO-pins | 29 (incl. pins connected to LoRa module) |
| Maximum available hardware PWM channels | 2 |
| Maximum available analog input pins (ADC) | 3 |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 2 |
| Maximum available hardware I2C interfaces | 2 |
| Maximum available hardware SPI interfaces | 2 (one is used by LoRa module) |
| USB to serial converter | CP2102 |
| Wireless communication | |
| Interface(s) | GNSS LoRa |
| GNSS chip/SoC | Air530 |
| Supported GNSS systems | GPS QZSS Beidou Galileo GLONASS |
| Maximum GNSS position accuracy [m] | 2.5 |
| LoRa chip/SoC | ASR6502 (integrated SX1262) |
| LoRa frequency [MHz] | 868 |
| Display | |
| Type | OLED |
| Driver | SH1107 |
| Screen diagonal [inch] | 0.96 |
| Number of pixels long side | 128 |
| Number of pixels short side | 64 |
| Display shape | Rectangular |
| Pixel colors | Blue |
| Light source | |
| Type | LED |
| LED (driver) chip | SK6812 |
| Light color | RGB |
| RTC | |
| RTC chip | Air530 |
| Back-up battery/capacitor | None |
| Battery circuit | |
| Supported battery chemistry | Li-Po Li-ion |
| Maximum charging voltage [V] | 4.2 |
| Maximum charging current [mA] | 80 |
| Adjustable charging current | No |
| Protection circuit | No |
| Connectors | |
| Power supply connector(s) | Micro USB female Through hole solder pin(s) (2.54mm) |
| IO-connector(s) | Micro USB female Through hole solder pin(s) (2.54mm) |
| Battery connector(s) | Molex Picoblade (compatible) male |
| Solar panel connector(s) | Through hole solder pin(s) |
| LoRa antenna connector | IPEX MHF 1/uFL male |
| GNSS antenna connector | Built-in antenna IPEX MHF 1/uFL male |
| Package contents | |
| Package contents | 1x CubeCell LoRa GNSS Development Board 2x Male pinheader 18p 1x Battery cable 1x IPEX/uFL to SMA adapter cable 1x SMA antenna |