LilyGO T3-S3 LoRa 868MHz - ESP32-S3 - SX1262 - 0.96 inch OLED Display
- Availability: Directly available from warehouse in Eindhoven
- SKU: 005371
€22.00
Ex Tax: €18.18
10 or more €21.75
20 or more €21.50
50 or more €21.25
100 or more €21.00
A LoRa development board of LilyGO including a 0.96 inch OLED display.
See the following page for more information: GitHub
Reviews Over LilyGO T3-S3 LoRa 868MHz - ESP32-S3 - SX1262 - 0.96 inch OLED Display
This product has 0 review(s) in total.
Report this review.
Tags:
Microcontroller Boards
, With Bluetooth
, LilyGO T3-S3 LoRa 868MHz - ESP32-S3 - SX1262 - 0.96 inch OLED Display
, 005371
, LilyGO TTGO
, H595
, Display
, Battery charger
, SD-card adapter
, Microcontroller (MCU)
, Programmable button(s)
, ADC
, I2C
, I2S
, PWM
, SPI
, GPIO
, UART
, USB CDC
, Native USB
, LoRa
, Wi-Fi
, Bluetooth
Specifications
| General | |
| Brand | LilyGO TTGO |
| Manufacturer model/SKU | H595 |
| Model revision | V1.2 |
| Features | Display Battery charger SD-card adapter Microcontroller (MCU) Programmable button(s) |
| General physical appearance | |
| Main color | Black |
| Weight [g] | 13 |
| Dimension X [mm] | 65 |
| Dimension Y [mm] | 27 |
| Mounting options | Mounting hole(s) |
| Diameter mounting hole(s) [mm] | 2 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 |
| Maximum supply voltage [V DC] | 5 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 40 |
| Maximum IO-pin sink current [mA] | 28 |
| MCU | |
| Manufacturer | Espressif |
| Chip series | ESP32-S3 |
| Maximum clock frequency [MHz] | 240 |
| Number of cores | 2 |
| Internal memory | |
| SRAM [KB] | 512 |
| PSRAM [MB] | 2 |
| Flash memory [MB] | 4 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC I2C I2S PWM SPI GPIO UART USB CDC Native USB |
| Number of IO-pins | 23 |
| Maximum available hardware PWM channels | 8 |
| Maximum available analog input pins (ADC) | 5 |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 3 |
| Maximum available hardware I2C interfaces | 2 |
| Maximum available hardware SPI interfaces | 2 |
| USB to serial converter | Integrated into microcontroller |
| Supported SD card size | Micro SD |
| Wireless communication | |
| Interface(s) | LoRa Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | ESP32-S3 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32-S3 |
| Bluetooth version | 5.0 |
| Supported Bluetooth standard(s) | LE |
| LoRa chip/SoC | SX1262 |
| LoRa frequency [MHz] | 868 |
| Display | |
| Type | OLED |
| Driver | SSD1306 |
| Screen diagonal [inch] | 0.96 |
| Number of pixels long side | 128 |
| Number of pixels short side | 64 |
| Display shape | Rectangular |
| Pixel colors | (shipped randomly from factory) |
| Battery circuit | |
| Battery charger chip/SoC | TP4054 |
| Supported battery chemistry | Li-Po Li-ion |
| Maximum charging voltage [V] | 4.2 |
| Maximum charging current [mA] | 500 |
| Adjustable charging current | No |
| Protection circuit | No |
| Connectors | |
| Power supply connector(s) | USB-C female Through hole solder pin(s) (2.54mm) |
| IO-connector(s) | USB-C female JST-SH (compatible) male Through hole solder pin(s) (2.54mm) |
| Battery connector(s) | Molex Picoblade (compatible) male |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna IPEX MHF 1/uFL male (requires modification) |
| LoRa antenna connector | RP-SMA female |
| Package contents | |
| Package contents | 1x T3-S3 ESP32-S3 LoRa Development Board 1x Molex Picoblade battery cable 2x Male pin header 1x LoRa antenna |