New
Soldered Electronics Inkplate 2 - 2.13 inch E-Ink E-Paper Display - ESP32
- Availability: Directly available from warehouse in Eindhoven
- SKU: 007922
€29.95
Ex Tax: €24.75
A development board from Soldered Electronics based on a ESP32 microcontroller by Espressif. Thanks to the built-in USB connector, it is easy to program. Things can be shown on the built-in E-paper display. For extra connectivity, the board has multiple wireless communication interfaces (including Wi-Fi/Bluetooth). Finally, the board has a battery connector where a Li-Po/Li-ion battery (not included) can be connected, which can also be charged via the board.
See the following page for more information: Wiki
Reviews Over Soldered Electronics Inkplate 2 - 2.13 inch E-Ink E-Paper Display - ESP32
This product has 0 review(s) in total.
Report this review.
Tags:
Microcontroller Boards
, With Bluetooth
, Soldered Electronics Inkplate 2 - 2.13 inch E-Ink E-Paper Display - ESP32
, 007922
, Soldered Electronics
, 333166
, Battery charger
, Display
, Microcontroller (MCU)
, I2C
, I2S
, SPI
, UART
, PWM
, ADC
, DAC
, GPIO
, USB CDC
, Wi-Fi
, Bluetooth
Specifications
| General | |
| Brand | Soldered Electronics |
| Manufacturer model/SKU | 333166 |
| Norm conformity | CE RoHS |
| Minimum operating temperature [°C] | 0 |
| Maximum operating temperature [°C] | 50 |
| Features | Display Battery charger Microcontroller (MCU) |
| General physical appearance | |
| Main color | Purple |
| Weight [g] | 21 |
| Dimension X [mm] | 65 |
| Dimension Y [mm] | 35 |
| Dimension Z [mm] | 10 |
| Mounting options | Screw thread |
| Thread size | M3 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 |
| Maximum supply voltage [V DC] | 5 |
| Indication (deep-)sleep current [μA] | 8 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 20 |
| Maximum IO-pin sink current [mA] | 28 |
| MCU | |
| Manufacturer | Espressif |
| Chip series | ESP32 |
| Maximum clock frequency [MHz] | 240 |
| Number of cores | 2 |
| Internal memory | |
| SRAM [KB] | 520 |
| PSRAM [MB] | 8 |
| Flash memory [MB] | 4 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC DAC I2C I2S PWM SPI GPIO UART USB CDC |
| Available GPIO pins | 2, 5, 12, 13, 14, 15, 25, 26, 34, 35, 36, 39 |
| Number of IO-pins | 12 |
| Maximum available hardware PWM channels | 8 |
| Maximum available analog input pins (ADC) | 11 |
| Maximum available analog output pins (DAC) | 2 |
| Maximum available hardware UART interfaces | 3 |
| Maximum available hardware I2C interfaces | 2 |
| Maximum available hardware SPI interfaces | 2 |
| USB to serial converter | CH340C |
| Wireless communication | |
| Interface(s) | Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | ESP32 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32 |
| Bluetooth version | 4.2 |
| Supported Bluetooth standard(s) | LE Classic |
| Display | |
| Type | E-paper |
| Screen diagonal [inch] | 2.13 |
| Number of pixels long side | 212 |
| Number of pixels short side | 104 |
| Display shape | Rectangular |
| Pixel colors | Red Black White |
| Battery circuit | |
| Battery charger chip/SoC | MCP73831 |
| Supported battery chemistry | Li-Po Li-ion |
| Maximum charging voltage [V] | 4.2 |
| Maximum charging current [mA] | 500 |
| Adjustable charging current | No |
| Protection circuit | No |
| Connectors | |
| Power supply connector(s) | USB-C female Solder pad(s) |
| IO-connector(s) | USB-C female JST-SH (compatible) male Through hole solder pin(s) (2.54mm) |
| Battery connector(s) | Solder pad(s) |
| Wi-Fi/Bluetooth antenna connector | IPEX MHF 1/uFL male Built-in antenna (requires modification) |
| Package contents | |
| Package contents | 1x Antenna 1x USB cable 1x Development board |