New
Soldered Electronics Inkplate 6MOTION - 6 inch E-Ink E-Paper Display - STM32H743
- Availability: Directly available from warehouse in Eindhoven
- SKU: 007934
€179.95
Ex Tax: €148.72
A development board from Soldered Electronics based on a STM32H743 microcontroller by STMicroelectronics with multiple sensors. Thanks to the built-in USB connector, it is easy to program. Things can be shown on the built-in E-paper display and with the touchscreen, an extensive user interface can be created. For extra connectivity, the board has multiple wireless communication interfaces (including Wi-Fi/Bluetooth). Finally, the board has a battery connector where a Li-Po/Li-ion battery (not included) can be connected, which can also be charged via the board.
See the following page for more information: Wiki
Reviews Over Soldered Electronics Inkplate 6MOTION - 6 inch E-Ink E-Paper Display - STM32H743
This product has 0 review(s) in total.
Report this review.
Tags:
Microcontroller Boards
, With Bluetooth
, Soldered Electronics Inkplate 6MOTION - 6 inch E-Ink E-Paper Display - STM32H743
, 007934
, [attridvalues_18]
, [attridnotes_45]
, [attridvalues_79]
, [attridvalues_47]
, [attridvalues_169]
Specifications
| General | |
| Brand | Soldered Electronics |
| Manufacturer model/SKU | |
| Minimum operating temperature [°C] | 0 |
| Maximum operating temperature [°C] | 50 |
| Features | RTC Display Gyroscope Touchscreen Light sensor Battery holder Digital LED(s) Rotary encoder Battery charger SD-card adapter Acceleration sensor Microcontroller (MCU) Programmable button(s) Object detection sensor |
| General physical appearance | |
| Main color | Purple |
| Weight [g] | 121 |
| Dimension X [mm] | 144 |
| Dimension Y [mm] | 108 |
| Dimension Z [mm] | 11 |
| Thread size | M3 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 |
| Maximum supply voltage [V DC] | 5 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 20 |
| Maximum IO-pin sink current [mA] | 20 |
| MCU | |
| Manufacturer | STMicroelectronics |
| Chip series | STM32H743 |
| Maximum clock frequency [MHz] | 480 |
| Number of cores | 1 |
| Internal memory | |
| SRAM [KB] | 1024 |
| SDRAM [MB] | 32 |
| PSRAM [MB] | 0 |
| Flash memory [MB] | 2 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC DAC I2C I2S PWM SPI GPIO UART USB CDC Native USB |
| (GP)IO expansion chip | PCAL6416A |
| Available GPIO pins | |
| Number of IO-pins | 27 |
| Maximum available hardware PWM channels | 16 |
| Maximum available analog input pins (ADC) | 8 |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 4 |
| Maximum available hardware I2C interfaces | 3 |
| Maximum available hardware SPI interfaces | 4 |
| USB to serial converter | CH340C |
| Supported SD card size | Micro SD |
| Wireless communication | |
| Interface(s) | Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | ESP32-C3 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32-C3 |
| Bluetooth version | 5.0 |
| Supported Bluetooth standard(s) | LE |
| Display | |
| Type | E-paper |
| Screen diagonal [inch] | 6 |
| Number of pixels long side | 1024 |
| Number of pixels short side | 758 |
| Display shape | Rectangular |
| Pixel colors | Black White |
| Partial display refresh | Yes |
| Light source | |
| Type | LED |
| LED (driver) chip | WS2812B |
| Light color | RGB |
| Temperature sensor | |
| Sensor (chip) | SHTC3 |
| Minimum measuring range [°C] | -40 |
| Maximum measuring range [°C] | 125 |
| Smallest resolution [°C] | 0.01 |
| Accuracy [±°C] | 0.2 |
| Humidity sensor | |
| Sensor (chip) | SHTC3 |
| Minimum measuring range [% R.H.] | 0 |
| Maximum measuring range [% R.H.] | 100 |
| Smallest resolution [%R.H.] | 0.01 |
| Accuracy [±%] | 2.0 |
| Light sensor | |
| Sensor (chip) | APDS-9960 |
| Measurable light | Visible |
| Light sensor type | Color Light intensity |
| Acceleration sensor | |
| Sensor chip/SoC | LSM6DSOX |
| Degrees of freedom (DOF) | 3 |
| Maximum measuring range [±g] | 16 |
| Gyroscope | |
| Sensor chip/SoC | LSM6DSOX |
| Degrees of freedom (DOF) | 3 |
| Maximum measuring range [±°/s] | 2000 |
| Rotary encoder | |
| Encoder (chip) | AS5600 |
| Encoder type | Absolute |
| Encoder technology | Magnetic field orientation |
| Number of steps/pulses per rotation | 4096 |
| Object detection sensor | |
| Sensor (chip) | APDS-9960 |
| Type | IR |
| Detection type | Gesture Presence |
| RTC | |
| RTC chip | STM32H743 |
| Back-up battery/capacitor | Optional |
| Battery circuit | |
| Battery charger chip/SoC | MCP73831 |
| Supported battery chemistry | Li-Po Li-ion |
| Maximum charging voltage [V] | 4.2 |
| Maximum charging current [mA] | 500 |
| Adjustable charging current | No |
| Protection circuit | No |
| Battery holder | |
| Suitable battery form factor | Button cell 2032 |
| Suitable number of batteries | 1 |
| Connectors | |
| Power supply connector(s) | USB-C female Solder pad(s) |
| IO-connector(s) | USB-C female JST-SH (compatible) male Through hole solder pin(s) (2.54mm) |
| Battery connector(s) | Solder pad(s) JST-PH (compatible) male |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna |
| Package contents | |
| Package contents | 1x USB cable 1x Development board |