2.23 inch OLED Display 128*32 pixels - Orange - I2C
- Availability: Directly available from warehouse in Eindhoven
- SKU: 004936
€10.25
Ex Tax: €8.47
Your shopping cart is empty!
An OLED display with I2C communication. This display works on 3.3V, so use a level converter if you have a 5V microcontroller.
See the following page for an Arduino library: Adafruit SSD1305
In the example, the SPI initialization is set by default, but use the I2C initialization a few lines below. The OLED_RESET pin can be set to -1.
This product has 1 review(s) in total.
| General | |
| Brand | ZHONGJINGYUAN |
| Features | Display |
| General physical appearance | |
| Main color | Blue |
| Weight [g] | 19 |
| Dimension X [mm] | 74 |
| Dimension Y [mm] | 30 |
| Mounting options | Mounting hole(s) |
| Diameter mounting hole(s) [mm] | 2.8 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 3.3 |
| Maximum supply voltage [V DC] | 3.3 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Communication | |
| Hardware interface(s) | I2C |
| Default I2C address | 0x3C |
| Adjustable I2C address | No |
| Built-in pull-up resistor(s) [kΩ] | 4.7 |
| Display | |
| Type | OLED |
| Driver | SSD1305 |
| Screen diagonal [inch] | 2.23 |
| Number of pixels long side | 128 |
| Number of pixels short side | 32 |
| Display shape | Rectangular |
| Pixel colors | Orange |
| Connectors | |
| Power supply connector(s) | Pin header male (2.54mm) |
| IO-connector(s) | Pin header male (2.54mm) |
| Package contents | |
| Package contents | 1x Display module |