Model: LM358
Is often used to amplify or as comparator. (For example as voltage reference)
This LM358 Opamp is a 8 pins DIP package...
€0.90
Ex Tax:€0.74
Model: M5STACK-U154
Brand: M5Stack
A module from M5Stack with 8 potentiometers that can be read out via I2C...
€14.00
Ex Tax:€11.57
Model: M5STACK-U208
A module from M5Stack with a potentiometer and a RGB LED for the modular chain system...
€8.25
Ex Tax:€6.82
Model: MAX7219CNG
This chip can digitally control and supply power to LED segments or LED matrix displays.
The following module uses: LED Matrix 8*8 with MAX7219 Module.
The datasheet of the chip can be found under the tab "Downloads".
..
€8.25
Ex Tax:€6.82
Model: MCP23017
A way to create more inputs or outputs via I2C communication. This chip gives you access to an extra 16 inputs or outputs via I2C.
Specifications:
Voltage: 1.8 - 5.5V DC
Supports 100kHz, 400kHz en 1.7MHz I2C speed
Check the datas..
€4.00
Ex Tax:€3.31
Model: MCP3008
The MCP3008 chip has an 8-channel ADC with 10-bit resolution. With the SPI interface, a sample rate of 200ksps is possible. This could for example be used to add analog inputs to your Raspberry Pi.
Specifications:
Supply voltage: 2.7-5.5V DC..
€4.50
Ex Tax:€3.72
Model: ABI16C-P1-6V-B
This metal LED (double, so polarity doesn't matter) with built-in series resistor can be easily installed thanks to the screw thread and supplied nut. The LED is also supplied with a rubber ring so that it can be mounted watertight...
€2.75
Ex Tax:€2.27
Model: ABI16C-P1-6V-G
This metal LED (double, so polarity doesn't matter) with built-in series resistor can be easily installed thanks to the screw thread and supplied nut. The LED is also supplied with a rubber ring so that it can be mounted watertight...
€2.75
Ex Tax:€2.27
This metal LED (double, so polarity doesn't matter) with built-in series resistor can be easily installed thanks to the screw thread and supplied nut. The LED is also supplied with a rubber ring so that it can be mounted watertight...
€44.50
Ex Tax:€36.78
Model: ABI16C-P1-6V-R
This metal LED (double, so polarity doesn't matter) with built-in series resistor can be easily installed thanks to the screw thread and supplied nut. The LED is also supplied with a rubber ring so that it can be mounted watertight...
€2.75
Ex Tax:€2.27
Model: ABI16C-P1-6V-W
This metal LED (double, so polarity doesn't matter) with built-in series resistor can be easily installed thanks to the screw thread and supplied nut. The LED is also supplied with a rubber ring so that it can be mounted watertight...
€2.75
Ex Tax:€2.27
Model: ABI16C-P1-6V-Y
This metal LED (double, so polarity doesn't matter) with built-in series resistor can be easily installed thanks to the screw thread and supplied nut. The LED is also supplied with a rubber ring so that it can be mounted watertight...
€2.75
Ex Tax:€2.27
Model: MONCERCONSET
A set of monolithic ceramic capacitors with 10 pieces each of the following values:
20pF (20)
22pF (22)
30pF (30) or 33pF (33)
100pF (101)
220pF (221)
330pF (331)
470pF (471)
1nf (102)
2.2nF (222)
10nF (103)
22nF (223)
33n..
€5.00
Ex Tax:€4.13
Model: MOUNTABLE-FUSEH-5x20MM
A convenient mountable fuse holder for standard 5x20mm fuses. The cap of the fuse holder can be easily unscrewed from the housing, in order to fit in a fuse. As soon as the fuse needs to be replaced, the cap can easily be unscrewed again and a new fu..
€1.00
Ex Tax:€0.83
Model: NE555N
A well known chip that can be used as a timer to create signals. The chip comes in 8-pins DIP format.
See the following page for example projects with the NE555: 47 Projects to Do With a 555!..
€0.50
Ex Tax:€0.41
Model: OL-USB-CAP
USB-CAP is a USB power filter/buffer to allow devices that draw large peak currents to operate more reliably with a relatively weak USB power supply/host...
€4.00
Ex Tax:€3.31
Model: OTLED3MM
A simple yellow/orange 3mm LED.
Do not forget the LED series resistor! (this can be found at the resistors)
For 5V: 330 Ω (click here)
For 3.3V: 150 Ω (click here)..
€0.10
Ex Tax:€0.08
Model: OTLED5MM
Diameter (mm) : 5mm
Kleur : Orange
Lens type: Transparent
Nominal Voltage: 1.8V
Nominal Current: 20mA
Don't forget the LED series resistor! (you can find this by the risistors)
At 5V: 330Ω (click here)
At 3.3V: 150Ω (click he..
€0.10
Ex Tax:€0.08
Model: P82B715P
With two of these chips it is possible to use an I2C connection over a much longer distance. Where the maximum distance is normally limited to a few meters, with the help of these chips it is possible to send signals up to 50m (under ideal conditions..
€6.00
Ex Tax:€4.96
Model: PCF8574N
Do you have too few IO pins, but do you have an I2C bus at your disposal? Then you can use this IC to create more IO pins.
Specifications:
Supply voltage: 2.5 - 6V DC
Signal voltage: 2.5 - 6V (same as power supply)
Maximum IO output curr..
€2.50
Ex Tax:€2.07
Model: KNOPZWA
Dimensions: 15mm * 17mm
Suitable for standard potentiometers with a shaft diameter of about 6mm (jagged shaft)...
€0.75
Ex Tax:€0.62
Model: KNOBCHICKENBLACK
A knob in the shape of a chicken head that can be used, for example, on potentiometers or rotary switches...
€0.75
Ex Tax:€0.62
Model: KNOPBKBL
Suitable for standard potentiometers with an axis of approx. 6mm in diameter with a jagged shaft...
€0.50
Ex Tax:€0.41
Model: KNOPBKBLUEFLAT
Suitable for standard potentiometers with an axis of approximately 6mm in diameter with a jagged shaft.
A black button with a blue finish...
€0.50
Ex Tax:€0.41
Model: KNOPBKGR
Suitable for standard potentiometers...
€0.50
Ex Tax:€0.41
Model: KNOPBKOR
Suitable for standard potentiometers...
€0.50
Ex Tax:€0.41
Model: KNOPBKORFLAT
Suitable for standard potentiometers with an axis of approx. 6mm in diameter with a jagged shaft.
A black button with an orange finish...
€0.50
Ex Tax:€0.41
Model: KNOPZWRD
Suitable for standard potentiometers...
€0.50
Ex Tax:€0.41
Model: KNOPBKREDFLAT
Suitable for standard potentiometers with an axis of approximately 6mm in diameter with a jagged shaft.
A black button with a red finish...
€0.50
Ex Tax:€0.41
Model: KNOBBAKELITE-MF-A01
Suitable for standard potentiometers and other rotary switches with a comparable axis. This knob has a set screw that can clamp the potentiometer so that the knob stays in place.
Specifications:
Color: Black with silver finish
Main materia..
€0.80
Ex Tax:€0.66
Model: KNOBBAKELITE-MF-A02
Suitable for standard potentiometers and other rotary switches with a comparable axis. This knob has a set screw that can clamp the potentiometer so that the knob stays in place...
€0.85
Ex Tax:€0.70
Model: KNOBBAKELITE-MF-A03
Suitable for standard potentiometers and other rotary switches with a comparable axis. This knob has a set screw that can clamp the potentiometer so that the knob stays in place.
Specifications:
Color: Black with silver finish
Main materia..
€0.90
Ex Tax:€0.74
Model: KNOBBAKELITE-MF-A04
Suitable for standard potentiometers and other rotary switches with a comparable axis. This knob has a set screw that can clamp the potentiometer so that the knob stays in place...
€0.95
Ex Tax:€0.79
Model: KNOBBAKELITE-MF-A05
Suitable for standard potentiometers and other rotary switches with a comparable axis. This knob has a set screw that can clamp the potentiometer so that the knob stays in place.
Specifications:
Color: Black with silver finish
Main materia..
€1.00
Ex Tax:€0.83
Model: KNOPBKWH
Suitable for standard potentiometers...
€0.50
Ex Tax:€0.41
Model: KNOPBKWHITEFLAT
Suitable for standard potentiometers with an axis of approximately 6mm in diameter with a jagged shaft.
A black button with a white finish...
€0.50
Ex Tax:€0.41
Model: KNOPBKYE
Suitable for standard potentiometers...
€0.50
Ex Tax:€0.41
Model: KNOPBKYELLOWFLAT
Suitable for standard potentiometers with an axis of approximately 6mm in diameter with a jagged shaft.
A black button with a yellow finish...
€0.50
Ex Tax:€0.41
Model: KNOBCHICKENRED
A knob in the shape of a chicken head that can be used, for example, on potentiometers or rotary switches...
€0.75
Ex Tax:€0.62
Model: KNOPZIL
Dimensions: 15mm * 17mm
Suitable for standard potentiometers with a shaft diameter of about 6mm (jagged shaft)...
€0.75
Ex Tax:€0.62
Model: KNOPZILS
Dimensions: 10mm * 15mm
Suitable for standard potentiometers with a shaft diameter of about 6mm (jagged shaft)...
€0.75
Ex Tax:€0.62
Model: KNOBCHICKENWHITE
A knob in the shape of a chicken head that can be used, for example, on potentiometers or rotary switches...
€0.75
Ex Tax:€0.62
Model: RAK-305057
The RAK3172-T is a microcontroller module with built-in LoRa functionality based on the STM32WLE5CC chip...
€9.75
Ex Tax:€8.06