Menu
Your Cart

With Wi-Fi - page 4

Model: LILYGO-H678
The T4-S3 from LilyGO is a microcontroller based on an ESP32-S3 with a built-in 2.41 inch AMOLED display. The board has a USB-C connection with which it can be programmed and/or powered (USB cable not included). Note: The pin spacing of the header..
€63.00
Ex Tax:€52.07
Model: LILYGO-H578
This TTGO T5 from LilyGO is a microcontroller based on an ESP32-S3 with a built-in 4.7 inch E-paper E-ink display. The board has a USB-C connection with which the module can be powered and programmed. There is also a connection with which the board c..
€46.00
Ex Tax:€38.02
Model: LILYGO-H580
This TTGO T5 from LilyGO is a microcontroller based on an ESP32-S3 with a built-in 4.7 inch E-paper E-ink display. The board has a USB-C connection with which the module can be powered and programmed. There is also a connection with which the board c..
€44.50
Ex Tax:€36.78
Model: LILYGO-H582
This development board based on the ESP32-S3 microcontroller chip supports Wi-Fi and Bluetooth. The board has a USB-C connection with which it can be programmed and/or powered, also as an Arduino...
€10.25
Ex Tax:€8.47
LilyGO T8-S3 ESP32-S3 - 16MB Flash - 8MB PSRAM
2-4 Weeks
Model: LILYGO-H669
The TTGO T8-S3 from LilyGO is a microcontroller based on an ESP32-S3. The board has a micro-SD card slot, battery charge chip and USB-C connector...
€12.00
Ex Tax:€9.92
Model: LILYGO-Q284
The TTGO Camera from LilyGO is a microcontroller based on an ESP32 with a built-in camera, a PIR sensor and a 0.96 inch OLED display. The CP2104 USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connectio..
€18.75
Ex Tax:€15.50
Model: LILYGO-Q123
The TTGO T-Camera Mic from LilyGO is a microcontroller based on an ESP32 with a built-in camera, microphone, a PIR sensor and a 0.96 inch OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro US..
€20.25
Ex Tax:€16.74
LilyGO TTGO T-Camera Plus ESP32 - Rear Fisheye Camera
Discontinued
Model: LILYGO-Q295
The TTGO Camera Plus from LilyGO is a microcontroller based on an ESP32 with a built-in fisheye camera on the rear side, a microphone and a 1.3 inch TFT display. The USB to serial converter makes it easy to program, even as an Arduino. The board has ..
€23.00
Ex Tax:€19.01
Model: LILYGO-H212
The TTGO T-Cell from LilyGO is a microcontroller based on an ESP32. The CP2104 USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be programmed and/or powered (Micro USB cable ..
€18.00
Ex Tax:€14.88
Model: LILYGO-Q325
The TTGO T-Controller from LilyGO is a microcontroller based on an ESP32 with a built-in 0.96 inch OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be progr..
€15.50
Ex Tax:€12.81
Model: LILYGO-Q224
The TTGO T-Display from LilyGO is a microcontroller based on an ESP32 with a built-in 1.14 inch TFT display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a USB-C connection with which it can be programmed an..
€13.00
Ex Tax:€10.74
Model: LILYGO-H589
The LilyGO TTGO T-Display-S3 is a microcontroller based on an ESP32-S3 with a built-in TFT display and solderd headers. This version also has a touchscreen. It is easy to program, also like an Arduino. The board has a USB-C connection with which it c..
€24.50
Ex Tax:€20.25
LilyGO TTGO T-Display-S3 ESP32-S3 - with 1.9 inch TFT Display
2-4 Weeks
Model: LILYGO-H569
The LilyGO TTGO T-Display-S3 is a microcontroller based on an ESP32-S3 with a built-in TFT display. It is easy to program, also like an Arduino. The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable not included..
€16.00
Ex Tax:€13.22
Model: LILYGO-H577
The LilyGO TTGO T-Display-S3 is a microcontroller based on an ESP32-S3 with a built-in TFT display. It is easy to program, also like an Arduino. The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable not included..
€14.00
Ex Tax:€11.57
Model: LILYGO-H587
The LilyGO TTGO T-Display-S3 is a microcontroller based on an ESP32-S3 with a built-in TFT display. This version also has a touchscreen. It is easy to program, also like an Arduino. The board has a USB-C connection with which it can be programmed and..
€24.75
Ex Tax:€20.45
Model: LILYGO-Q169
The TTGO T-Energy from LilyGO is a microcontroller based on an ESP32. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be programmed and/or powered (Micro USB cable not i..
€11.50
Ex Tax:€9.50
Model: LILYGO-G713
The TTGO T-Higrow from LilyGO is a microcontroller based on an ESP32 with several sensors. The USB to serial converter makes it easy to program, even as an Arduino. The board has a USB-C connection with which it can be programmed and/or powered (USB-..
€19.00
Ex Tax:€15.70
Model: LILYGO-Q222
The TTGO T-Higrow from LilyGO is a microcontroller based on an ESP32 with several sensors and a battery. The USB to serial converter makes it easy to program, even as an Arduino. The board has a USB-C connection with which it can be programmed and/or..
€26.00
Ex Tax:€21.49
Model: LILYGO-Q128
The TTGO T-Higrow from LilyGO is a microcontroller based on an ESP32 with several sensors. The USB to serial converter makes it easy to program, even as an Arduino. The board has a USB-C connection with which it can be programmed and/or powered (USB-..
€12.00
Ex Tax:€9.92
Model: LILYGO-Q129
The TTGO T-Higrow from LilyGO is a microcontroller based on an ESP32 with several sensors and a battery. The USB to serial converter makes it easy to program, even as an Arduino. The board has a USB-C connection with which it can be programmed and/or..
€18.75
Ex Tax:€15.50
Model: LILYGO-Q329
The TTGO T-Internet from LilyGO is a microcontroller based on an ESP32 with an Ethernet port and SIM card slot. The USB to serial converter makes it easy to program, even as an Arduino. The board has a USB-C connection with which it can be programmed..
€16.75
Ex Tax:€13.84
Model: LILYGO-Q161
The TTGO T-Journal from LilyGO is a microcontroller based on an ESP32 with a built-in camera and a 0.91 inch OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it ca..
€18.25
Ex Tax:€15.08
Model: LILYGO-Q162
The TTGO T-Journal from LilyGO is a microcontroller based on an ESP32 with a built-in fisheye camera and a 0.91 inch OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with whi..
€19.50
Ex Tax:€16.12
Model: LILYGO-Q132
The TTGO T-Lite W5500 from LilyGO is a microcontroller based on a TTGO T-Micro32 (ESP32). The board has an OLED screen on the back and it has the option to place a W5500 Ethernet Module (this is not included). Doing so provides the module with both ..
€13.50
Ex Tax:€11.16
Model: LILYGO-H244
This LilyGO development board contains the TTGO T-Micro32 (ESP32) module and is easy to program, even as an Arduino. The board has a Micro USB connection with which it can be programmed and/or powered (Micro USB cable not included). Specifications..
€12.00
Ex Tax:€9.92
Model: LILYGO-H530
The TTGO T-Motor from LilyGO is a microcontroller based on an ESP32 with a TMC2209 stepper motor driver and a magnetic encoder, making it suitable for use as a closed-loop stepper motor driver. The T-Motor can be easily mounted on a NEMA17 motor with..
€30.00
Ex Tax:€24.79
Model: LILYGO-Q370
This development board is based on an ESP32-C3 with Wi-Fi and Bluetooth LE. This board also has a charging circuit for a Li-ion/Li-po battery. Note: This board does not have a Li-ion protection circuit, so you must use a Li-ion battery with a prot..
€8.00
Ex Tax:€6.61
Model: LILYGO-Q369
This development board is based on an ESP32-C3 with Wi-Fi and Bluetooth LE. This board also has a charging circuit for a Li-ion/Li-po battery and also a holder for a 16340 battery, Note: This board does not have a Li-ion protection circuit, so you..
€8.50
Ex Tax:€7.02
Model: LILYGO-H516
The T-Relay is a handy relay module with Wi-Fi and Bluetooth. This module has 4 relays and an ESP32-Wrover. See the following page for more information and examples: LilyGO T-Relay Github Note: This board does not have a built-in USB to serial ..
€14.50
Ex Tax:€11.98
Model: LILYGO-Q344
The TTGO T-SIM-7608E-H from LilyGO is a microcontroller based on an ESP32 with a built-in A7608E-H Module. This means that the module has numerous wireless communication options such as GNSS (GPS), Wi-Fi, Bluetooth and LTE. The board has a USB-C conn..
€42.00
Ex Tax:€34.71
LilyGO TTGO T-SIM-A7670E R2 ESP32 - ESP32-WROVER - with 18650 Battery Holder
2-4 Weeks
Model: LILYGO-Q334
The TTGO T-SIM-A7670E R2 from LilyGO is a microcontroller based on an ESP32 with a built-in SIM-A7670E Module. This means that the module has numerous wireless communication options such as GNSS (GPS), Wi-Fi, Bluetooth and LTE. The board has a USB-C ..
€42.00
Ex Tax:€34.71
LilyGO TTGO T-SIM-A7670E R2 ESP32 - ESP32-WROVER - with 18650 Battery Holder - without GNSS
2-4 Weeks
Model: LILYGO-Q195
The TTGO T-SIM-A7670E R2 from LilyGO is a microcontroller based on an ESP32 with a built-in SIM-A7670E Module. This means that the module has numerous wireless communication options such as Wi-Fi, Bluetooth and LTE. The board has a USB-C connection w..
€35.50
Ex Tax:€29.34
Model: LILYGO-Q141
The TTGO T-SIM7000G from LilyGO is a microcontroller based on an ESP32 with a built-in SIM7000G Module. It easy to program, even as an Arduino. The board has a USB-C connector with which it can be programmed and/or powered (USB-C cable not included)...
€56.00
Ex Tax:€46.28
Model: LILYGO-Q323
The TTGO T-SIM7070G from LilyGO is a microcontroller based on an ESP32 with a built-in SIM7070G Module. This means that the module has numerous wireless communication options such as GNSS (GPS), Wi-Fi, Bluetooth and LTE. The board has a USB-C connect..
€38.50
Ex Tax:€31.82
Model: LILYGO-H247
The LilyGO T-Thruster is a kit based on an ESP8266 microcontroller and two DC motors. The kit can be used to make a remote-controlled airplane, for example with styrofoam. See the following page to get started with T-Thruster and download the App,..
€10.50
Ex Tax:€8.68
Model: LILYGO-Q199
The TTGO T-Watch from LilyGO is a smartwatch based on an ESP32 with a built-in 1.54 inch LCD display with touchscreen and various sensors and actuators. The USB to serial converter makes it easy to program, even as an Arduino. The T-Watch has a micro..
€38.00
Ex Tax:€31.41
Model: LILYGO-H414-01
The TTGO T-Watch from LilyGO is a smartwatch based on an ESP32 with a built-in 1.54 inch LCD display with touchscreen and various sensors and actuators. The CP2104 USB to serial converter makes it easy to program, even as an Arduino. The T-Watch has ..
€38.00
Ex Tax:€31.41
Model: LILYGO-Q327
The TTGO T-Watch from LilyGO is a smartwatch based on an ESP32 with a built-in display with touchscreen and various sensors and actuators. It's easy to program, also as an Arduino. The T-Watch has a micro USB connection with which it can be programme..
€43.00
Ex Tax:€35.54
Model: LILYGO-I116
The TTGO T10 V2.0 from LilyGO is a microcontroller based on an ESP32 with a built-in 1.44 inch TFT display and MPU9250. The CP2104 USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which i..
€36.00
Ex Tax:€29.75
Model: LILYGO-I117
The TTGO T10 V2.0 from LilyGO is a microcontroller based on an ESP32 with a built-in 1.8 inch TFT display and MPU9250. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be..
€30.25
Ex Tax:€25.00
Model: LILYGO-Q318
The TTGO T2 from LilyGO is a microcontroller based on an ESP32-WROOM with a built-in 0.96 inch OLED display and a microSD card adapter. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection wit..
€17.50
Ex Tax:€14.46
Model: LILYGO-Q134
The TTGO LoRa32 from LilyGO is a microcontroller based on an ESP32 with a built-in LoRa chip and an OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be prog..
€18.00
Ex Tax:€14.88
Model: LILYGO-Q213
The TTGO T3 LoRa32 from LilyGO is a microcontroller based on an ESP32 with a built-in SX1276 LoRa chip and a 0.96 inch OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with w..
€22.00
Ex Tax:€18.18
Model: LILYGO-Q367
The TTGO T4 from LilyGO is a microcontroller based on an ESP32 with a built-in 2.2 inch TFT display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be programmed and/or..
€22.50
Ex Tax:€18.60
Model: LILYGO-Q299
The TTGO T5 from LilyGO is a microcontroller based on an ESP32 with a built-in 2.13 inch E-paper E-ink display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be progra..
€15.75
Ex Tax:€13.02
Model: LILYGO-H548
The T5 V2.3.2 from LilyGO is a microcontroller based on an ESP32 with a built-in 2.13 inch DEPG0213BN E-paper E-ink display. Note: This board does not have a built-in USB to serial converter, the following converter is required to program the boar..
€17.00
Ex Tax:€14.05
Model: LILYGO-H493
The T-Display from LilyGO is a microcontroller based on an ESP32 with a built-in 2.66 inch E-paper E-ink display. Note: This board does not have a built-in USB to serial converter, the following converter is required to program the board: TTGO T-U..
€29.50
Ex Tax:€24.38
LilyGO TTGO T5S V2.8 ESP32 - with 2.7 inch E-paper E-ink - 2 Colors
Discontinued
Model: LILYGO-Q305
The TTGO T5S V2.8 from LilyGO is a microcontroller based on an ESP32 with, among other things, a built-in 2.7 inch E-paper E-ink display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection w..
€30.75
Ex Tax:€25.41
Model: LILYGO-Q109
The TTGO T7 Mini32-WROVER from LilyGO is a microcontroller based on an ESP32. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be programmed and/or powered (micro US..
€11.50
Ex Tax:€9.50
Showing 151 to 200 of 372 (8 Pages)
1
false
true
true
Remove
Change
tr