Discontinued
LilyGO TTGO T5S V2.8 ESP32 - with 2.7 inch E-paper E-ink - 2 Colors
- Availability: Discontinued
- SKU: 004467
€30.75
Ex Tax: €25.41
The TTGO T5S V2.8 from LilyGO is a microcontroller based on an ESP32 with, among other things, a built-in 2.7 inch E-paper E-ink display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included).
See the following page for more information: GitHub
Reviews Over LilyGO TTGO T5S V2.8 ESP32 - with 2.7 inch E-paper E-ink - 2 Colors
This product has 0 review(s) in total.
Report this review.
Tags:
Microcontroller Boards
, With Bluetooth
, LilyGO TTGO T5S V2.8 ESP32 - with 2.7 inch E-paper E-ink - 2 Colors
, 004467
, LilyGO TTGO
, H230 or Q305
, Display
, Microphone
, Battery charger
, Audio amplifier
, SD-card adapter
, Microcontroller (MCU)
, ADC
, I2C
, I2S
, PWM
, SPI
, GPIO
, UART
, USB CDC
, Wi-Fi
, Bluetooth
Specifications
| General | |
| Brand | LilyGO TTGO |
| Manufacturer model/SKU | H230 or Q305 |
| Model revision | V2.8_2.7 |
| Features | Display Microphone Audio amplifier Battery charger SD-card adapter Microcontroller (MCU) |
| General physical appearance | |
| Main color | White |
| Weight [g] | 21 |
| Dimension X [mm] | 82 |
| Dimension Y [mm] | 47 |
| Mounting options | Pin headers Mounting hole(s) |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 3.3 |
| Maximum supply voltage [V DC] | 5 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 20 |
| Maximum IO-pin sink current [mA] | 28 |
| MCU | |
| Manufacturer | Espressif |
| Chip series | ESP32 |
| Maximum clock frequency [MHz] | 240 |
| Number of cores | 2 |
| Internal memory | |
| SRAM [KB] | 520 |
| PSRAM [MB] | 0 |
| Flash memory [MB] | 4 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC I2C I2S PWM SPI GPIO UART USB CDC |
| Number of IO-pins | 10 |
| Maximum available hardware PWM channels | 6 |
| Maximum available analog input pins (ADC) | 6 |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 3 |
| Maximum available hardware I2C interfaces | 2 |
| Maximum available hardware SPI interfaces | 2 |
| USB to serial converter | CH9102F (or CP2104) |
| Supported SD card size | Micro SD |
| Wireless communication | |
| Interface(s) | Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | ESP32 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32 |
| Bluetooth version | 4.2 |
| Supported Bluetooth standard(s) | LE Classic |
| Display | |
| Type | E-paper |
| Driver | EK79652 |
| Screen diagonal [inch] | 2.7 |
| Number of pixels long side | 264 |
| Number of pixels short side | 176 |
| Pixel colors | Black White |
| Sound sensor | |
| Sensor (chip(s)) | ICS-43434 |
| Type | Microphone |
| Audio amplifier | |
| Amplifier chip | MAX98357 |
| Number of (normal) channels | 1 |
| Maximum power per (normal) channel [W] | 1.2 |
| Minimum speaker impedance per (normal) channel [Ω] | 4 |
| Maximum speaker impedance per (normal) channel [Ω] | 8 |
| Battery circuit | |
| Battery charger chip/SoC | TP4054 |
| Supported battery chemistry | Li-Po Li-ion |
| Maximum charging voltage [V] | 4.2 |
| Maximum charging current [mA] | 500 |
| Adjustable charging current | No |
| Protection circuit | No |
| Connectors | |
| Power supply connector(s) | Micro USB female Pin header male (2.54mm) |
| IO-connector(s) | Micro USB female JST-PH (compatible) male Pin header male (2.54mm) |
| Battery connector(s) | Pin header male (2.54mm) Molex Picoblade (compatible) male |
| Speaker connector(s) | Solder pin(s) (THT) |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna IPEX MHF 1/uFL male (requires modification) |
| Package contents | |
| Package contents | 1x TTGO T5S V2.8 1x Battery cable 1x I2C cable |