LilyGO TTGO T10 V2.0 ESP32 - with 1.44 inch TFT Display

The TTGO T10 V2.0 from LilyGO is a microcontroller based on an ESP32 with a built-in 1.44 inch TFT display and MPU9250. The CP2104 USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included).

Specifications:

• ESP32 chip (240MHz dual core processor)
• Flash memory: 4MB
• SRAM: 520kB
• Built-in Wi-Fi
• Built-in Bluetooth
• Built-in 1.44 inch TFT display (128x128 Pixels)
• Built-in MPU-9250 Accelerometer/Gyroscope/Magnetometer
• Built-in Li-ion/Li-Po battery charging circuit: TP4054 chip can charge up to 500mA
• 3 Built-in switches
• Built-in micro SD card connection
• Built-in speaker (8 ohm 1W)
• Battery connector: 2p Molex Picoblade
• Battery cable included
• Dimensions PCB: 50.0x31.3mm

Package contents:

• 1x TTGO T10 V2.0 with 1.44 inch display and MPU9250
• 1x Battery cable with 2p Molex Picoblade connector

See the following page for more information and to get started with the board: TTGO-T10-V20

To program the board with the Arduino IDE, select the 'ESP32 Dev Module' in the board manager.

Note: The pins on the board are directly connected to the ESP32 chip and are therefore only suitable for 3.3V signals.