LilyGO TTGO T4 V1.3 ESP32 - with 2.2 inch TFT Display

The TTGO T4 from LilyGO is a microcontroller based on an ESP32 with a built-in 2.2 inch TFT display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included).

Specifications:

• ESP32 chip (240MHz dual core processor)
• Flash memory: 4MB
• PSRAM: 8MB
• Built-in Wi-Fi
• Built-in Bluetooth
• Built-in 2.2 inch TFT display (ILI9341 driver)
• Built-in power management chip (IP5306) with Li-ion/Li-Po battery charging circuit (charge up to ~2A)
• USB to serial converter: CP2104 or CH9102 (drivers)
• Built-in micro SD card connection
• I2C connector: 5p JST-PH
• I2C cable included
• Battery connector: 2p Molex Picoblade
• Battery cable included
• Dimensions PCB: 65.9x40.8mm

See the following page for more information and to get started with the board: TTGO-T4

To program the board with the Arduino IDE, select the 'ESP32 Dev Module' in the board manager.

Note: The pins on the board are directly connected to the ESP32 chip and are therefore only suitable for 3.3V signals.