Model: M5STACK-K119
The M5Stack Thermalonline Cat-M is an advanced industrial solution designed for remote temperature monitoring thanks to the MLX90640 IR thermal sensor. Data can be read from outside by the built-in telecom module.
Note: There is no power supply in..
€156.25
Ex Tax:€129.13
Model: M5STACK-K034
Brand: M5Stack
The M5Stack TOUGH is a development kit based on an ESP32 chipset. It has, among other things, a built-in display with touchscreen, Wi-Fi, Bluetooth, a speaker and an RTC. The programming languages UIFlow, MicroPython and Arduino are supported. The M5..
€57.25
Ex Tax:€47.31
Model: MPESP32-D0WDQ6-DEVBOARD
This development board based on the ESP32 has the form factor of a Raspberry Pi Pico and is easy to program, even as an Arduino. The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included).
Se..
€7.00
Ex Tax:€5.79
Model: OL-ESP32-DEVKIT-LIPO
A development board from Olimex based on ESP32-WROOM. With built-in Wi-Fi and Bluetooth, this board is ideal for IoT applications. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with whi..
€9.75
Ex Tax:€8.06
Model: OL-ESP32-ADF
ESP32-ADF is a development board based on the ESP32 WROVER module. Additionally, this board features an audio amplifier, two speakers, stereo microphone and various (touch) buttons to control the device. With built-in Wi-Fi and Bluetooth, t..
€26.60
Ex Tax:€21.98
Model: OL-ESP32-C6-EVB
A development board from Olimex based on the ESP32-C6-WROOM. This chip supports Wi-Fi, Bluetooth, Zigbee and Thread. The board has a USB-C connection with which it can be programmed and/or powered. The board also has 4 relays and 4 optocoupler isolat..
€19.00
Ex Tax:€15.70
Model: OL-ESP32-DEVKIT-LIPO-EA
A development board from Olimex based on ESP32-WROOM. With built-in Wi-Fi and Bluetooth, this board is ideal for IoT applications. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with whi..
€12.05
Ex Tax:€9.96
Model: OL-ESP32-GATEWAY-EA
A development board from Olimex based on ESP32-WROOM. With the built-in Wi-Fi, Bluetooth and Ethernet interface, this board is ideal for IoT applications. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro..
€22.95
Ex Tax:€18.97
Model: OL-ESP32-POE-ISO
Brand: DFRobot
A development board from Olimex based on ESP32-WROOM. With the built-in Wi-Fi, Bluetooth and Ethernet PoE interface, this board is ideal for IoT applications. The USB to serial converter makes it easy to program, also like an Arduino. The board has a..
€30.20
Ex Tax:€24.96
Model: OL-ESP32-POE-ISO-EA
A development board from Olimex based on ESP32-WROOM. With the built-in Wi-Fi, Bluetooth and Ethernet PoE interface, this board is ideal for IoT applications. The USB to serial converter makes it easy to program, also like an Arduino. The board has a..
€32.65
Ex Tax:€26.98
Model: OL-ESP32-POE-ISO-EA-IND
A development board from Olimex based on ESP32-WROOM. With the built-in Wi-Fi, Bluetooth and Ethernet PoE interface, this board is ideal for IoT applications. The USB to serial converter makes it easy to program, also like an Arduino. The board has a..
€35.05
Ex Tax:€28.97
Model: OL-ESP32-POE-ISO-IND
A development board from Olimex based on ESP32-WROOM. With the built-in Wi-Fi, Bluetooth and Ethernet PoE interface, this board is ideal for IoT applications. The USB to serial converter makes it easy to program, also like an Arduino. The board has a..
€32.75
Ex Tax:€27.07
Model: OL-ESP32-POE-ISO-WROVER
Brand: DFRobot
A development board from Olimex based on ESP32-WROVER. With the built-in Wi-Fi, Bluetooth and Ethernet PoE interface, this board is ideal for IoT applications. The USB to serial converter makes it easy to program, also like an Arduino. The board has ..
€32.00
Ex Tax:€26.45
Model: OL-ESP32-POE-ISO-WROVER-EA
A development board from Olimex based on ESP32-WROVER. With the built-in Wi-Fi, Bluetooth and Ethernet PoE interface, this board is ideal for IoT applications. The USB to serial converter makes it easy to program, also like an Arduino. The board has ..
€34.50
Ex Tax:€28.51
Model: OL-ESP32-S2-DEVKIT-LIPO-EA
A development board from Olimex based on ESP32-S2-WROOM. With built-in Wi-Fi, this board is ideal for IoT applications. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can b..
€10.85
Ex Tax:€8.97
Model: OL-ESP32-S2-DEVKIT-LIPO-USB
A development board from Olimex based on the ESP32-S2. With built-in Wi-Fi, this board is ideal for IoT applications. The board has a micro USB connection that allows it to be programmed and/or powered (micro USB cable not included). This board also ..
€8.45
Ex Tax:€6.98
Model: OL-ESP32-S2-WROVER-DEVKIT-LIPO
This development board is based on the ESP32-S2-WROVER and is easy to program. The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included)...
€9.75
Ex Tax:€8.06
Model: OL-ESP32-S2-WROVER-DEVKIT-LIPO-EA
This development board is based on the ESP32-S2-WROVER and is easy to program. The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included). This variant has an external antenna...
€12.05
Ex Tax:€9.96
Model: OL-ESP32-S3-DevKit-Lipo
A development board from Olimex based on ESP32-S3-WROOM-1-N8R8. With built-in Wi-Fi and Bluetooth, this board is ideal for IoT applications. The board has two USB-C connections that allows it to be programmed and/or powered (USB cable not included). ..
€15.50
Ex Tax:€12.81
Model: OL-ESP32-S3-DEVKIT-LIPO-EA
A development board from Olimex based on ESP32-S3. With built-in Wi-Fi and Bluetooth, this board is ideal for IoT applications. The board has two USB-C connections that allow it to be programmed and/or powered (USB cable not included). Also, this boa..
€18.00
Ex Tax:€14.88
Model: OL-ESP32-SBC-FABGL
A development board from Olimex based on ESP32-WROVER-E with built-in Wi-Fi and Bluetooth. The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). This board is made for use with the FabGL library and..
€20.00
Ex Tax:€16.53
Model: OL-ESP32-WROVER-DEVKIT-LIPO
A development board from Olimex based on ESP32-WROVER. With built-in Wi-Fi and Bluetooth, this board is ideal for IoT applications. The board has a micro USB connection that allows it to be programmed and/or powered (micro USB cable not included). Al..
€11.25
Ex Tax:€9.30
Model: OPENTHERMADP
The OpenTherm Master Adapter is development board based on a ESP32-S3 microcontroller. OpenTherm is a standardized protocol used between a thermostat (master) and a boiler (slave). This adapter emulates the thermostat (master) and thus acts as a repl..
€14.50
Ex Tax:€11.98
Model: PYCSIPY
With the Pycom SiPy, you have a small MicroPython based IoT development platform with WiFi, Bluetooth and Sigfox. With a Wi-Fi range up to 1km in combination with the ESP32 Wi-Fi chip from Espressif offers many possibilities for IoT applications.
Wi..
€33.00
Ex Tax:€27.27
Model: FANPDCTRL
A development board based on an ESP32-S3 (with Wi-Fi and Bluetooth), which is specially made to use with the Universal Fan Mount for Radiators to easily switch the fans on and off. Unique to this module is the built-in USB PD (USB Power Delivery) tri..
€15.75
Ex Tax:€13.02
Model: RPIPICO2W
This is the original Raspberry Pi Pico 2. This development board is based on the RP2350 microcontroller which is the successor of the RP2040 from the first Raspberry Pi pico. That makes this board faster and more efficient. This W variant also has Wi..
€9.25
Ex Tax:€7.64
Model: RPIPICOW
This is the original Raspberry Pi Pico W. This is a completely different product from Raspberry Pi than everyone is used to. The Pico W is a microcontroller, while for example, the Raspberry Pi 4 and Zero are microcomputers. This module can be progra..
€8.50
Ex Tax:€7.02
Model: WS-23289
Brand: Waveshare
This is the original Raspberry Pi Pico W with soldered headers by Waveshare. This is a completely different product from Raspberry Pi than everyone is used to. The Pico W is a microcontroller, while for example, the Raspberry Pi 4 and Zero are microc..
€11.50
Ex Tax:€9.50
Model: RPIPICOWH
This is the original Raspberry Pi Pico WH. This module can be programmed in MicroPython, Arduino and other C/C++ languages. Compared to the normal Raspberry Pi Pico, this Pico W(ireless) also has built-in Wi-Fi and Bluetooth, making it ideal for IoT ..
€9.25
Ex Tax:€7.64
Model: NANOPOWER-DEV-S2
The NanoPower Dev S2 is an ultra-efficient off-grid development board designed by SDR Engineering.
The NanoPower is based on an ESP32-S2, but with a number of unique features. Everything on this module is focused on a low idle current (120uA). Thi..
€28.75
Ex Tax:€23.76
Model: SEEED-110991748
A kit from Seeed Studio consisting of various sensors and the Wio terminal development module...
€92.25
Ex Tax:€76.24
Model: SEEED-114993068
The SenseCAP Indicator is a development board based on an ESP32-S3 and an RP2040 microcontroller. The module has, among other things, a built-in display with touchscreen and Grove ports for connecting sensors. The software is open source (see link be..
€62.00
Ex Tax:€51.24
Model: SEEED-114993070
The SenseCAP Indicator is a development board based on an ESP32-S3 and an RP2040 microcontroller. The module has, among other things, a built-in display with touchscreen and Grove ports for connecting sensors. Also, the D1L variant can connect to oth..
€62.25
Ex Tax:€51.45
Model: SEEED-102030005
The Spartan Edge Accelerator Board from Seeed Studio is an FPGA development board based on a Xilinx Spartan-7 chip. The board can be used as a shield for the Seeeduino/Arduino Uno or as a stand-alone board. In addition, the board also has a buil..
€51.00
Ex Tax:€42.15
Model: SEEED-102110037
Seeed Studio's Wio Link is an ESP8266-based module that makes the use of sensors and modules for IoT applications even easier. The 6 available Grove connectors, 3 of which are digital, 1 analog, 1 I2C and 1 UART, make this Wio Link easy to use multip..
€9.75
Ex Tax:€8.06
Model: SEEED-102991299
The Seeed Studio Wio Terminal is a programmable 2.4 inch LCD screen with built-in buttons, sensors, a built-in SD card slot and Grove connectors for connecting even more modules to this product. This Wio Terminal also has integrated Wi-Fi and Bluetoo..
€34.50
Ex Tax:€28.51
Model: SEEED-113991054
A small microcontroller based on an ESP32-C3...
€6.30
Ex Tax:€5.21
Model: SEEED-113991254
A small microcontroller based on an ESP32-C6...
€8.25
Ex Tax:€6.82
Model: SEEED-113991114
A small microcontroller based on an ESP32-S3...
€9.00
Ex Tax:€7.44
Model: SEEED-113991115
A small microcontroller board based on an ESP32-S3. This Sense version of the board includes a camera, digital microphone and micro SD card adapter...
€17.75
Ex Tax:€14.67