Olimex ESP32-C6-EVB Development Board - with 4 Relays
- Availability: Directly available from warehouse in Eindhoven
- SKU: 005757
€19.00
Ex Tax: €15.70
A development board from Olimex based on the ESP32-C6-WROOM. This chip supports Wi-Fi, Bluetooth, Zigbee and Thread. The board has a USB-C connection with which it can be programmed and/or powered. The board also has 4 relays and 4 optocoupler isolated input pins.
See the following page for more information: GitHub
See the following page for more information: Manufacturer page
Reviews Over Olimex ESP32-C6-EVB Development Board - with 4 Relays
This product has 0 review(s) in total.
Report this review.
Specifications
| General | |
| Brand | Olimex |
| Manufacturer model/SKU | ESP32-C6-EVB |
| Model revision | A |
| Norm conformity | RoHS |
| Features | Electric switch Microcontroller Programmable button(s) |
| General physical appearance | |
| Main color | Red |
| Weight [g] | 83 |
| Dimension X [mm] | 100 |
| Dimension Y [mm] | 70 |
| Mounting options | Mounting hole(s) |
| Diameter mounting hole(s) [mm] | 3.2 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 (via USB or +5V pin) 8 (via DC Jack) |
| Maximum supply voltage [V DC] | 50 (via DC Jack) 5 (via USB or +5V pin) |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 30 (INx) 3.3 (EXT1 and UEXT) |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 40 |
| Maximum IO-pin sink current [mA] | 28 |
| MCU/SoC | |
| Manufacturer | Espressif |
| Chip series | ESP32-C6 |
| Maximum clock frequency [MHz] | 160 |
| Number of cores | 1 |
| Internal memory | |
| SRAM [KB] | 512 |
| PSRAM [MB] | 0 |
| Flash memory [MB] | 4 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | I2C I2S SPI UART PWM ADC GPIO USB CDC |
| Number of IO-pins | 17 (incl. INx) 13 (excl. INx) (EXT1 en UEXT connectors) |
| Maximum available hardware PWM channels | 9 |
| Maximum available analog input pins (ADC) | 4 |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 3 |
| Maximum available hardware I2C interfaces | 2 |
| Maximum available hardware SPI interfaces | 1 |
| USB to serial converter | Integrated into microcontroller |
| Wireless communication | |
| Interface(s) | Wi-Fi Bluetooth Zigbee Thread |
| Wi-Fi chip/SoC | ESP32-C6 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32-C6 |
| Bluetooth version | 5.3 |
| Supported Bluetooth standard(s) | LE |
| Zigbee chip/SoC | ESP32-C6 |
| Zigbee frequency [GHz] | 2.4 |
| Switch | |
| Switching method | Electrical |
| Switch type | Mechanical relay |
| Number of channels/gangs | 4 |
| Contact(s) | NC (normally closed) NO (normally open) |
| Maximum switching voltage [V AC] | 50 |
| Maximum switching voltage [V DC] | 24 |
| Switching voltage equal to supply voltage | No |
| Maximum switching current per channel (resistive load) [A] | 10 |
| Current per engaged relay [mA] | 72 |
| Connectors | |
| Power supply connector(s) | Through hole solder pin(s) (2.54mm) USB-C female DC-jack 5.5/2.1mm female |
| IO-connector(s) | Pin header male (2.54mm) Through hole solder pin(s) (2.54mm) USB-C female |
| Switch connector(s) | Screw terminal |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna |
| Zigbee antenna connector | Built-in antenna |
| Package contents | |
| Package contents | 1x ESP32-C6-EVB 4x Rubber foot |