Seeed Studio Wio Terminal

The Seeed Studio Wio Terminal is a programmable 2.4 inch LCD screen with built-in buttons, sensors, a built-in SD card slot and Grove connectors for connecting even more modules to this product. This Wio Terminal also has integrated Wi-Fi and Bluetooth.

It is possible to program the Terminal with: Arduino, CircuitPython, Micropython, ArduPy, AT Firmware and even Visual Studio Code. On the back is a Raspberry Pi 40-Pin compatible GPIO connection, so you can use this screen as a Raspberry Pi Hat. It's also possible to use it for machine learning with e.g. TinyML en Edge Impulse.

To fix this terminal there are 2 mounting holes and built-in magnets. You can make the Wio Terminal portable by using the Wio Terminal Battery Chassis.

Specifications:

• Chipset: ATSAMD51 Cortex-M4F
  • Maximum clock frequency: 200MHz
  • External flash memory: 4MB
  • RAM: 192 KB
• Wireless connection:
  • Chipset: Realtek RTL8720DN*
  • 2.4 and 5.0GHz Wi-Fi
  • BLE 5.0 Bluetooth
• LCD Screen:
  • Resolution: 320x240 pixels
  • Size: 2.4 inch
• User Interface:
  • 5-way button
  • 3 programmable buttons
  • On-off switch
• Built-in Modules:
  • Accelerometer
  • Microphone
  • Speaker
  • Light sensor
  • Infrared emitter 940nm
• Interface:
  • Micro SD card slot (maximum 16GB)
  • GPIO: 40 pins (Raspberry Pi compatible)
  • 2x Multipurpose Grove connectors
  • USB-C Port (power and data)
• Enclosure:
  • Dimensions: 72x57x12mm

For the pin-out and overview of the Wio Terminal, see images.

*Note: The wireless connectivity is only supported by programming via the Arduino IDE.

Package contents:

• 1x Wio Terminal
• 1x Short USB-C cable
• 1x Wio Terminal User Manual
• 1x Reserve 5-way button
• 1x Seeed Studio stickers

For detailed explanations, features, demos, pin-out diagrams, full specifications, video's and much more. Check out this link: Seeed Wio Terminal.