Arduino Uno Q - 4GB RAM - 32GB eMMC
- Availability: Directly available from warehouse in Eindhoven
- SKU: 007774
€68.50
Ex Tax: €56.61
Your shopping cart is empty!
The Arduino Uno Q is a versatile board compatible with a wide range of Arduino shields. At its core, it combines an STM32U585 microcontroller with a QRB2210 microprocessor for AI acceleration and graphics processing. It includes 16GB of built-in storage and can be conveniently programmed and powered through its USB-C port. Additional features include integrated Wi-Fi and Bluetooth, a 13x8 LED matrix, a Qwiic I2C connector, and high-speed headers for expanded connectivity.
Note: All MCU GPIOs are 3.3V logic and 5V tolerant, except A0-A5 (these are not 5V tolerant).
See the following page for more information: Wiki
Check the tab "Downloads" for more information and/or downloads.
Datasheet: 007443_ABX00162-ABX00173-datasheet.pdf
Pinout: 007774_ABX00173-full-pinout.pdf
Schematic: 007774_ABX00173-schematics.pdf
| General | |
| Brand | Arduino |
| Manufacturer model/SKU | ABX00173 |
| Norm conformity | CE FCC RoHS |
| Minimum operating temperature [°C] | -10 |
| Maximum operating temperature [°C] | 60 |
| Features | Display Microprocessor (MPU) Microcontroller (MCU) |
| General physical appearance | |
| Main color | Blue |
| Weight [g] | 21 |
| Dimension X [mm] | 69 |
| Dimension Y [mm] | 54 |
| Mounting options | Pin headers Mounting hole(s) |
| Diameter mounting hole(s) [mm] | 3.2 |
| Form factor | Module (general) Uno layout/shield |
| General electrical properties | |
| Minimum supply voltage [V DC] | 4.5 (USB-C) 7 (VIN) |
| Maximum supply voltage [V DC] | 27 (VIN) 5.5 (USB-C) |
| Minimum IO-pin input voltage [V] | 3.3 (MCU) 1.8 (MPU) |
| Maximum IO-pin input voltage [V] | 5 (MCU pins are 5V tolerant, except A0-A5) 1.8 (MPU) |
| IO-pin output voltage [V] | 3.3 (MCU) 1.8 (MPU) |
| Maximum IO-pin source current [mA] | 20 (MCU) |
| Maximum IO-pin sink current [mA] | 20 (MCU) |
| MPU | |
| Manufacturer | Qualcomm |
| Chip series | QRB2210 |
| Maximum clock frequency [GHz] | 2 |
| Number of cores | 4 |
| MCU | |
| Manufacturer | STMicroelectronics |
| Chip series | STM32U585 |
| Maximum clock frequency [MHz] | 160 |
| Number of cores | 1 |
| Internal memory | |
| SRAM [KB] | 786 |
| Flash memory [MB] | 2 |
| EEPROM type | Emulated |
| Memory [GB] | 4 |
| Memory type | LPDDR4X |
| Data storage | |
| Storage type | eMMC |
| Capacity [GB] | 32 |
| Communication | |
| Hardware interface(s) | ADC CAN DAC I2C I2S I3C LIN PWM SPI GPIO UART USB CDC Comparator MIPI (DSI) |
| Available GPIO pins | A4, A5, A6, A7, B0, B1, B2, B3, B4, B6, B7, B8, B9, C0, C1, C2, C3, D1, A11, A12, B10, B11, B14, B15, D12, D13 |
| Number of IO-pins | 26 (only JDIGITAL, JANALOG, SPI and QWIIC pins, see datasheet for the rest) |
| Maximum available hardware PWM channels | 6 |
| Maximum available analog input pins (ADC) | 6 |
| Maximum available analog output pins (DAC) | 2 |
| Maximum available hardware UART interfaces | 1 |
| Maximum available hardware I2C interfaces | 3 |
| Maximum available hardware SPI interfaces | 1 |
| Wireless communication | |
| Interface(s) | Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | WCBN3536A |
| Wi-Fi frequency [GHz] | 2.4 5 |
| Bluetooth chip/SoC | WCBN3536A |
| Bluetooth version | 5.1 |
| Display | |
| Type | LED Matrix |
| Number of pixels long side | 13 |
| Number of pixels short side | 8 |
| Pixel colors | Blue |
| Connectors | |
| Power supply connector(s) | USB-C female Pin header female (2.54mm) |
| IO-connector(s) | USB-C female JST-SH (compatible) male Pin header male (2.54mm) Pin header female (1.27mm) Pin header female (2.54mm) |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna |
| Package contents | |
| Package contents | 1x Arduino Uno Q |