2-4 Weeks
DFRobot FireBeetle 2 ESP32-S3-U Development Board - OV2640 - Separate headers
- Availability: 2-4 Weeks
- SKU: 005099
€19.50
Ex Tax: €16.12
The DFRobot FireBeetle 2 ESP32-S3 is a microcontroller based on an ESP32-S3 with an OV2640 camera. It is easy to program, even like an Arduino. The board has a USB-C connector that allows it to be programmed and/or powered (USB-C cable not included).
See the following page for more information: Wiki
Reviews Over DFRobot FireBeetle 2 ESP32-S3-U Development Board - OV2640 - Separate headers
This product has 0 review(s) in total.
Report this review.
Tags:
Microcontroller Boards
, With Bluetooth
, DFRobot FireBeetle 2 ESP32-S3-U Development Board - OV2640 - Separate headers
, 005099
, DFRobot
, DFR0975-U
, Battery charger
, Camera
, Microcontroller (MCU)
, Programmable button(s)
, I2C
, I2S
, SPI
, Native USB
, UART
, PWM
, ADC
, GPIO
, USB CDC
, Wi-Fi
, Bluetooth
Specifications
| General | |
| Brand | DFRobot |
| Manufacturer model/SKU | DFR0975-U |
| Minimum operating temperature [°C] | -20 |
| Maximum operating temperature [°C] | 70 |
| Features | Camera Battery charger Microcontroller (MCU) Programmable button(s) |
| General physical appearance | |
| Main color | Black |
| Weight [g] | 10 |
| Dimension X [mm] | 60 |
| Dimension Y [mm] | 26 |
| Mounting options | SMT Mounting hole(s) |
| Diameter mounting hole(s) [mm] | 2 |
| Form factor | Module (general) |
| General electrical properties | |
| Minimum supply voltage [V DC] | 5 |
| Maximum supply voltage [V DC] | 5 |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 40 |
| Maximum IO-pin sink current [mA] | 28 |
| MCU | |
| Manufacturer | Espressif |
| Chip series | ESP32-S3 |
| Maximum clock frequency [MHz] | 240 |
| Number of cores | 2 |
| Internal memory | |
| SRAM [KB] | 512 |
| PSRAM [MB] | 8 |
| Flash memory [MB] | 16 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC I2C I2S PWM SPI GPIO UART USB CDC Native USB |
| Number of IO-pins | 26 |
| Maximum available hardware PWM channels | 8 |
| Maximum available analog input pins (ADC) | 20 |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 3 |
| Maximum available hardware I2C interfaces | 2 |
| Maximum available hardware SPI interfaces | 2 |
| USB to serial converter | Integrated into microcontroller |
| Wireless communication | |
| Interface(s) | Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | ESP32-S3 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32-S3 |
| Bluetooth version | 5.0 |
| Supported Bluetooth standard(s) | LE |
| Scanner/camera | |
| Type | Camera |
| Sensor(chip) | OV2640 |
| Lense type | Normal |
| Number of pixels long side | 1600 |
| Number of pixels short side | 1220 |
| Maximum viewing angle (diagonal) [°] | 68 |
| Battery circuit | |
| Battery charger chip/SoC | ETA6003 |
| Supported battery chemistry | Li-Po Li-ion |
| Maximum charging voltage [V] | 4.2 |
| Maximum charging current [mA] | 1000 |
| Adjustable charging current | No |
| Protection circuit | No |
| Connectors | |
| Power supply connector(s) | USB-C female Solder pin(s) (SMT) Through hole solder pin(s) (2.54mm) |
| IO-connector(s) | USB-C female Solder pin(s) (SMT) Through hole solder pin(s) (2.54mm) |
| Battery connector(s) | Wire solder pin(s)/pad(s) JST-PH (compatible) female |
| Wi-Fi/Bluetooth antenna connector | IPEX MHF 1/uFL male |
| Package contents | |
| Package contents | 1x FireBeetle 2 Board ESP32-S3 1x OV2640 Camera 1x 2.4GHz Wi-Fi and Bluetooth Antenna 1x Male pin header 18p 1x Female pin header 18p 1x Male pin header 14p 1x Female pin header 14p |