Menu
Your Cart

Development Boards - page 5

Model: KS0004
The Keyestudio Sensor Shield is compatible with the Arduino Uno, allowing you to use multiple sensors. The sensor shield also offers multiple 3-pin interfaces (G, V, S) for direct connection to 3-pin modules such as sensors or servos. The V(cc) pi..
€5.00
Ex Tax:€4.13
Model: ARDLEO
This Leonardo is based on the open source design of Arduino, making it both hardware and software compatible with the Arduino ecosystem. The Leonardo is often compared to the Uno R3, but it has another microcontroller, the ATmega32U4. This allows you..
€8.50
Ex Tax:€7.02
Model: LILYGO-Q309
The LilyGO LILY Pi is based on the ESP32 and has the form factor of a Raspberry Pi. This LILY Pi comes with a display with touchscreen and a built-in relay. It is easy to program via the Arduino IDE. Note: The USB ports are connected directly to t..
€40.50
Ex Tax:€33.47
Model: LILYGO-H501
This T-Display from LilyGO is a microcontroller based on an ESP32 with a built-in 1.02 inch E-paper E-ink display and an enclosure. Note: This board does not have a built-in USB to serial converter, to program the board the following converte..
€22.50
Ex Tax:€18.60
Model: LILYGO-H676
This T-Display from LilyGO is a microcontroller based on an ESP32-S3 with a built-in 1.02 inch E-paper E-ink display and an enclosure...
€21.50
Ex Tax:€17.77
Model: LILYGO-H534
The T01-C3 is a successor to the popular ESP-01 Wi-Fi module. This module is based on the ESP32-C3 microcontroller (instead of the ESP8266 like the ESP-01 module), as such this module also has Bluetooth low energy (BLE) in addition to Wi-Fi..
€5.50
Ex Tax:€4.55
Model: LILYGO-Q402
The T-Beam from LilyGO is a microcontroller based on an ESP32 including a built-in LoRa chip and a GNSS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be progra..
€41.00
Ex Tax:€33.88
Model: LILYGO-Q391
The T-Beam from LilyGO is a microcontroller based on an ESP32 including a built-in LoRa chip and a GNSS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be progra..
€43.00
Ex Tax:€35.54
Model: LILYGO-Q389
The T-Beam from LilyGO is a microcontroller based on an ESP32 including a built-in LoRa chip and a GNSS module. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it can be progra..
€34.75
Ex Tax:€28.72
Model: LILYGO-H616
The T-Beam-S3 from LilyGO is a microcontroller based on an ESP32-S3 including a built-in LoRa chip, a GNSS module and several sensors. The T-Beam can also be use with the SoftRF software: SoftRF..
€53.00
Ex Tax:€43.80
Model: LILYGO-H659
The T-Beam-S3 from LilyGO is a microcontroller based on an ESP32-S3 including a built-in LoRa chip, a GNSS module and several sensors. The T-Beam can also be use with the SoftRF software: SoftRF Note: LilyGO has changed the model from H615 to H..
€79.75
Ex Tax:€65.91
Model: LILYGO-H703
A development board based on an ESP32-S3 microcontroller which has various sensors, including a camera and microphone...
€35.50
Ex Tax:€29.34
Model: LilyGO-H591
The TTGO T-Camera S3 from LilyGO is a microcontroller based on an ESP32-S3 with a built-in camera, microphone, a PIR sensor and an OLED display. The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable not included..
€20.25
Ex Tax:€16.74
Model: LILYGO-H644
A development board based on an ESP32-S3 microcontroller which has various sensors, including a camera and microphone...
€22.00
Ex Tax:€18.18
Model: LILYGO-H626
A development board based on an ESP32-S3 microcontroller which has various sensors, including a camera and microphone...
€29.00
Ex Tax:€23.97
LilyGO T-CAN485 - ESP32 Development Board - CAN Bus - RS485
2-4 Weeks
Model: LILYGO-Q331
A development board from LilyGO based on an ESP32 microcontroller. This board has both a CAN bus and an RS485 interface...
€16.50
Ex Tax:€13.64
Model: LILYGO-H623
T-Deck is a development board based on an ESP32-S3 microcontroller. The keyboard and LoRaWi-Fi/Bluetooth connectivity make it very suitable for sending messages wirelessly. Note: Unlike most Grove products, the Grove connector on the T-Deck has a ..
€69.75
Ex Tax:€57.64
T-Deck Plus is a development board based on an ESP32-S3 microcontroller. The keyboard and LoRaWi-Fi/Bluetooth connectivity make it very suitable for sending messages wirelessly. Note: The pins of the Grove interface are used for the internal GNSS ..
€82.50
Ex Tax:€68.18
Model: LILYGO-H495
The T-Display from LilyGO is a microcontroller based on an ESP32 with a built-in 1.02 inch E-paper E-ink display. Note: This board does not have a built-in USB to serial converter, to program the board the following converter is required: TTGO T-U..
€13.50
Ex Tax:€11.16
LilyGO T-Display RP2040 - with 1.14 inch TFT Display
Discontinued
Model: LILYGO-H520
The T-Display RP2040 from LilyGO is a microcontroller based on an RP2040 from Raspberry Pi with a built-in 1.14 inch LCD display...
€9.50
Ex Tax:€7.85
Model: LILYGO-H610
LilyGO's TF (SD card) Shield is a shield suitable for LilyGO's T-Display series. This version has female pin headers, making it suitable for a T-Display with male headers...
€4.50
Ex Tax:€3.72
Model: LILYGO-H609
LilyGO's TF (SD card) Shield is a shield suitable for LilyGO's T-Display series. This version has male pin headers, making it suitable for a T-Display with female headers, or one without headers...
€4.50
Ex Tax:€3.72
Model: LILYGO-H619
The LilyGO TTGO T-Display-S3 AMOLED is a microcontroller based on an ESP32-S3 with a built-in AMOLED display. It is easy to program, also like an Arduino. The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable no..
€31.25
Ex Tax:€25.83
Model: LILYGO-H705
The LilyGO TTGO T-Display-S3 AMOLED is a microcontroller based on an ESP32-S3 with a built-in AMOLED display with touchscreen. It is easy to program, also like an Arduino. The board has a USB-C connection with which it can be programmed and/or powere..
€36.00
Ex Tax:€29.75
Model: LILYGO-H557
This T-Dongle module from LilyGO is a microcontroller based on an ESP32-S2 chip. This board has two USB connections, a type-A male and a type-A female. As a result, the module can not only be used as a (virtual) USB device (such as a keyboard), but a..
€13.00
Ex Tax:€10.74
LilyGO T-Dongle-S3 - ESP32-S3
2-4 Weeks
Model: LILYGO-K193
This T-Dongle module from LilyGO is a microcontroller based on an ESP32-S3 chip. This board has support for Wi-Fi, Bluetooth and an SD card slot. Thanks to the built-in USB host controller, you can use it to create a wireless keyboard, for example...
€14.00
Ex Tax:€11.57
Model: LILYGO-H547
A GPIO expansion module for the LilyGO T-ECHO Note: This version comes without microphone and IMU...
€3.00
Ex Tax:€2.48
Model: LILYGO-K167
LilyGO's T-Embed is a microcontroller board with a lot of features, such as an IPS display, rotary encoder, speaker and more. This version has a black front and comes without a case on the back...
€32.75
Ex Tax:€27.07
Model: LILYGO-K209
LilyGO's T-Embed is a microcontroller board with a lot of features, such as an IPS display, rotary encoder, speaker and more. This version has a complete black case...
€37.00
Ex Tax:€30.58
Model: LILYGO-K201
LilyGO's T-Embed is a microcontroller board with a lot of features, such as an IPS display, rotary encoder, speaker and more. This version has a white front and comes without a case on the back...
€35.00
Ex Tax:€28.93
Model: LILYGO-K210
LilyGO's T-Embed is a microcontroller board with a lot of features, such as an IPS display, rotary encoder, speaker and more. This version has a white front with a white button and comes without a case on the back...
€34.50
Ex Tax:€28.51
Model: LILYGO-H744 Brand: DFRobot
..
€26.00
Ex Tax:€21.49
Model: LILYGO-H683
The LilyGo T-ETH Lite camera shield is compatible with the LilyGO T-ETH Lite. Note: This product is only compatible with the ESP32-S3 version of the LilyGO T-ETH Lite...
€13.50
Ex Tax:€11.16
Model: LILYGO-H673
The T-ETH-Lite from LilyGO is a microcontroller based on ESP32-WROVER-E. The board has an ethernet port and a micro-SD card slot. Note: This board has no USB port or USB to serial converter. To program the board, an external USB to serial converte..
€16.00
Ex Tax:€13.22
Model: LILYGO-H674
The T-ETH-Lite from LilyGO is a microcontroller based on ESP32-S3. The board has an ethernet port and a micro-SD card slot. Note: This board has no USB port or USB to serial converter. To program the board, an external USB to serial converter is r..
€17.00
Ex Tax:€14.05
Model: LILYGO-H622
A development board based on an ESP32-S3 microcontroller with an FPGA. The board can be expanded with the following shield: T-FPGA Shield..
€22.00
Ex Tax:€18.18
Model: LILYGO-H631
This is an expansion shield for the LilyGO T-FPGA...
€8.50
Ex Tax:€7.02
Model: LILYGO-K146
A wristband based on an S78G System in Chip (SiP) that integrates a number of chips into one, including a microcontroller, LoRa chip and GNSS (GPS) chip. Note: The same wristband is used as for the TTGO T-Wristband modules, however, this product i..
€39.25
Ex Tax:€32.44
Model: LILYGO-H438-01
Note: The USB-C port on this module is only intended to power the module. To program this module, the following module is required (see images): TTGO TTL USB Serial Port Adapter for T-Internet PoE..
€20.00
Ex Tax:€16.53
Model: LILYGO-Q416
The TTGO T-PCIE from LilyGO is a microcontroller based on an ESP32. The USB to serial converter makes it easy to program, even as an Arduino. The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable not included). ..
€15.00
Ex Tax:€12.40
Model: LILYGO-H553
The T-PicoC3 from LilyGO is a microcontroller that uses both the ESP32-C3 and the RP2040 chip with also a built-in 1.14 inch TFT display. Thanks to the built-in USB to serial converters, both microcontrollers are easy to program, even as Arduinos. Th..
€12.00
Ex Tax:€9.92
Model: LILYGO-Q428
A PoE (Power over Ethernet) module from LilyGO. With this module it possible to connect to a router via an Ethernet cable and simultaneously supply the module with power via the same cable using PoE. This module is based on an ESP32-WROVER-E chip, wh..
€39.00
Ex Tax:€32.23
Model: LILYGO-H579
A very small microcontroller with built-in display from LilyGO. It is easy to program, also like an Arduino. Compared to the normal T-QT, this board has extra PSRAM, but less flash memory. In addition, this new version also has a Li-ion charging..
€12.00
Ex Tax:€9.92
Model: LILYGO-H588
A very small microcontroller with built-in display from LilyGO. It is easy to program, also like an Arduino. Compared to the normal T-QT, this board also has a Li-ion charging circuit built in...
€12.00
Ex Tax:€9.92
Model: LILYGO-H628
A very small microcontroller with built-in display from LilyGO. It is easy to program, also like an Arduino. Compared to the normal T-QT, this board also has a Li-ion charging circuit built in...
€12.25
Ex Tax:€10.12
Model: LILYGO-H561
The T-Relay-8 is a handy relay module with Wi-Fi and Bluetooth. This module has 8 relays and an ESP32-Wrover. Note: This board does not have a built-in USB to serial converter, to program the board the following converter is needed: TTGO T-U2T..
€23.25
Ex Tax:€19.21
Model: LILYGO-H629
The T-RelayS3 is a handy relay module with Wi-Fi and Bluetooth. This module contains 6 relays and an ESP32-S3 microcontroller. The module comes with a housing that can be mounted on a DIN rail. In addition, the design offers the possibility to easily..
€39.50
Ex Tax:€32.64
Showing 201 to 250 of 717 (15 Pages)
1
false
true
true
Remove
Change
tr