Model: ESP32S3SMEXP
ESP32-S3 SuperMini Expansion Board is an expansion board specially designed for ESP32-S3 SuperMini Development Board. In addition to the convenient pins, the module also has a battery charger.
Note: When inserting the SuperMini, make sure that the..
€4.50
Ex Tax:€3.72
Model: ESP32-C6-DEVKITC-1
This development board from Espressif, with ESP-C6 microcontroller chip, which supports Zigbee and Thread as well as Wi-Fi and Bluetooth. The board has a USB-C connection with which it can be programmed and/or powered...
€13.00
Ex Tax:€10.74
Model: ESP32-C6-DEVKITM-1
This development board from Espressif, with ESP-C6 microcontroller chip, which supports Zigbee and Thread as well as Wi-Fi and Bluetooth. The board has a USB-C connection with which it can be programmed and/or powered...
€12.50
Ex Tax:€10.33
Model: ESP32-S3-BOX-3
The ESP32-S3-BOX-3 is a very comprehensive microcontroller, with some accessories such as a docking station, mounting bracket and sensor module.
Note: In the specifications, some values (such as number of pins and type of connectors) depend on whi..
€71.75
Ex Tax:€59.30
Model: ESP32-S3-DEVKITC-1-N32R16V
Note: Not all broken out GPIO pins are actually connected to the ESP32-S3...
€22.25
Ex Tax:€18.39
Model: ESP32-S3-DEVKITC-1-N8R8
..
€18.00
Ex Tax:€14.88
Note: No antenna is included. ..
€20.00
Ex Tax:€16.53
Model: ESP-THREAD-BR-ZIGBEE-GW
..
€15.50
Ex Tax:€12.81
Model: HTCC-AB02S-HF
The CubeCell is a compact, Arduino-compatible LoRaWAN development board with support for Li-ion/Li-Po powering and charging. This version has a built-in Air530Z GNSS (GPS) module. In addition, the board has an OLED display and you can directly connec..
€24.50
Ex Tax:€20.25
Model: HTCC-AB02
The CubeCell is a compact, Arduino-compatible LoRaWAN development board with support for Li-ion/Li-Po powering and charging. In addition, you can directly connect a solar panel for both powering the board and charging the Li-ion/Li-Po battery...
€18.75
Ex Tax:€15.50
Model: HTCC-AB01_V2-868MHZ
The CubeCell is a compact, Arduino-compatible LoRaWAN development board with support for Li-ion/Li-Po powering and charging. In addition, you can directly connect a solar panel for both powering the board and charging the Li-ion/Li-Po battery...
€16.75
Ex Tax:€13.84
Model: HT-N5262-HF
The Mesh Node T114 is an energy-efficient development board based on the nRF52840 microcontroller and an SX1262 LoRa module...
€34.50
Ex Tax:€28.51
Model: HT-MESHPOCKETQI2
Note: Wireless charging reduces the LoRa range...
€75.50
Ex Tax:€62.40
Model: HT-SUFFICIENTIOHUB-HF
The Sufficient IoT Hub from Heltec is a development board with, among other things, LoRa connectivity that runs on a Linux distribution...
€36.00
Ex Tax:€29.75
Model: HT-VME213-HF
Heltec's Vision Master is a versatile development board based on the ESP32-S3. The microcontroller is compatible with Arduino, PlatformIO and MicroPython and supports Bluetooth, Wi-Fi and LoRa. This makes it ideal for developing electronic tags and o..
€22.00
Ex Tax:€18.18
Model: HT-VME290-HF
Heltec's Vision Master is a versatile development board based on the ESP32-S3. The microcontroller is compatible with Arduino, PlatformIO and MicroPython and supports Bluetooth, Wi-Fi and LoRa. This makes it ideal for developing electronic tags and o..
€23.50
Ex Tax:€19.42
Model: HT-VMT190-HF
This Heltec Vision Master T190 is a microcontroller based on an ESP32-S3 with a built-in IPS-TFT display and a LoRa module. The microcontroller is compatible with Arduino, PlatformIO and MicroPython and supports Bluetooth and Wi-Fi...
€21.00
Ex Tax:€17.36
Model: HT-VMT190
The Heltec Vision Master T190 is a microcontroller based on an ESP32-S3 with a built-in IPS-TFT display. The microcontroller is compatible with Arduino, PlatformIO and MicroPython and supports Bluetooth and Wi-Fi...
€19.50
Ex Tax:€16.12
Model: HTIT-WB32_V3
This Heltec microntroller board has an OLED screen and supports both Wi-Fi and Bluetooth. The board has a USB-C connector that allows it to be programmed and/or powered (USB cable not included). This board also supports Li-ion/Li-Po powering and char..
€14.00
Ex Tax:€11.57
Model: HTIT-WB32LAF_V3.1-433MHZ
This Heltec microntroller board has an OLED screen and supports both Wi-Fi, Bluetooth and LoRa (433MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po ..
€22.75
Ex Tax:€18.80
Model: HTIT-WB32LA_V3-868MHZ
This Heltec microntroller board has an OLED screen and supports both Wi-Fi, Bluetooth and LoRa (868MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po ..
€21.00
Ex Tax:€17.36
Model: ZC-327-1
Compared to the V3, this version features upgrades like solar charging and increased storage capacity.
Note: Not all countries allow LoRa signals to be transmitted on 868MHz with a power of 28dBm (630mW, maximum of this module). In the Netherlands..
€21.00
Ex Tax:€17.36
Model: HT-WB32LA_V4-868MHZ
Compared to the V3, this version features upgrades like solar charging and increased storage capacity.
Note: Not all countries allow LoRa signals to be transmitted on 868MHz with a power of 28dBm (630mW, maximum of this module). In the Netherlands..
€22.00
Ex Tax:€18.18
Model: HT-WIRELESSPAPER433
This E-Ink display from Heltec has an ESP32-S3 and can be connected via Bluetooth, Wi-Fi and LoRa...
€18.75
Ex Tax:€15.50
..
€22.50
Ex Tax:€18.60
Model: HT-WIRELESSPAPER868
The Wireless Paper from Heltec is based on an ESP32-S3 microcontroller with an E-paper/E-ink screen. The USB to serial converter makes it easy to program, also like an Arduino. The board has a USB-C connection with which it can be programmed and/or p..
€22.50
Ex Tax:€18.60
Model: HTIT-WSL-HF_V3
This Heltec microntroller board has many IO pins, and supports both Wi-Fi, Bluetooth and LoRa (868MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po p..
€19.50
Ex Tax:€16.12
Model: HTIT-WS-HF_V3
This Heltec microntroller board has many IO pins, and supports both Wi-Fi, Bluetooth and LoRa (868MHz). The board has a USB-C connection that allows it to be programmed and/or powered (USB cable not included). Also, this board supports Li-ion/Li-Po p..
€21.50
Ex Tax:€17.77
Model: HT-WIRELESS-TRACKER-HF
A development board from Heltec based on ESP32-S3 which also goes by the name of HTIT-Tracker. This board supports Wi-Fi, Bluetooth, LoRa and GNSS. Furthermore, the board features a TFT display and Li-ion/Li-Po powering and charging. The board has a ..
€23.50
Ex Tax:€19.42
Model: ESP32-1732S019N
A microcontroller based on an ESP32-S3 with a built-in 1.9 inch IPS display. The USB to serial converter makes it easy to program, also like an Arduino. The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable not ..
€12.00
Ex Tax:€9.92
Model: ESP32-2424S012C-I
A round 1.28 inch TFT display with touchscreen based on an ESP32-C3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE...
€15.50
Ex Tax:€12.81
Model: ESP32-2424S012C-I-Y(B)
A round 1.28 inch TFT display with touchscreen based on an ESP32-C3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE...
€17.00
Ex Tax:€14.05
Model: ESP32-2432S028R
Jingcai ESP32-2432S028R - 2.8 inch TFT-LCD Display 320*240 pixels with Resistive Touchscreen - ESP32
A 2.8 inch TFT display with touchscreen based on an ESP32 microcontroller. It is easy to program via the Micro USB connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered sep..
€12.50
Ex Tax:€10.33
Model: ESP32-2432S032C-I
A 3.2 inch TFT display with touchscreen based on an ESP32 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered separat..
€17.25
Ex Tax:€14.26
Model: ESP32-2432S032R-I
A 3.2 inch TFT display with touchscreen based on an ESP32 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered separat..
€15.50
Ex Tax:€12.81
Model: ESP32-3248S035C
A 3.5 inch TFT display with touchscreen based on an ESP32 microcontroller. It is easy to program via the micro-USB connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered sep..
€19.00
Ex Tax:€15.70
Model: ESP32-3248S035R
A 3.5 inch TFT display with touchscreen based on an ESP32 microcontroller. It is easy to program via the micro-USB connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered sep..
€16.75
Ex Tax:€13.84
Model: ESP32-4827S043C
A 4.3 inch TFT display with touchscreen based on an ESP32-S3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered sepa..
€25.25
Ex Tax:€20.87
Model: ESP32-4827S043R
A 4.3 inch TFT display with touchscreen based on an ESP32-S3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered sepa..
€21.50
Ex Tax:€17.77
Model: ESP32-8048S043C-I
A 4.3 inch TFT display with touchscreen based on an ESP32-S3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered sepa..
€29.25
Ex Tax:€24.17
Model: ESP32-8048S050C-I
Jingcai ESP32-8048S050C-I - 5 inch IPS Display 800*480 pixels with Capacitive Touchscreen - ESP32-S3
A 5 inch TFT display with touchscreen based on an ESP32-S3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered separa..
€36.50
Ex Tax:€30.17
Model: ESP32-8048S070C
A 7 inch TFT display with touchscreen based on an ESP32-S3 microcontroller. It is easy to program via the USB-C connector, including via the Arduino IDE. One cable for the GPIO pins is included, to use all pins additional cables can be ordered separa..
€37.25
Ex Tax:€30.79
This V0.1 version is largely identical to the newer version; however, the audio chip is different. Otherwise, as far as we have been able to discover, it is the same...
€37.25
Ex Tax:€30.79
Model: JOYSTICKSHIELD
This shield has four handy buttons and a joystick. There are also pins available to easily connect your NRF24L01 or Bluetooth (HC-06) module to your Arduino.
Specifications:
Joystick with push button present in combination with four pushbutt..
€5.00
Ex Tax:€4.13
Model: KS5007
This educational kit contains 24 commonly used sensors and modules along with an ESP32 microcontroller and an ESP32 expansion board...
€47.50
Ex Tax:€39.26
Model: KS5002
The Beetlebot from Keyestudio is a smart robot that is controlled by an ESP32 and is compatible with LEGO building blocks. Furthermore, the Beetlebot can avoid obstacles and follow black lines. This robot also has three different shapes, each shape h..
€65.00
Ex Tax:€53.72
Model: KS0183
The Multi-purpose Shield V1 from Keyestudio is a learning board based on the Arduino...
€8.00
Ex Tax:€6.61
Model: KS0184
De Multi-purpose Shield V2 from Keyestudio is a learning board based on the Arduino...
€5.00
Ex Tax:€4.13
Model: KS0486
A development board from Keyestudio based on the ATMEGA328P chip with the form factor of an Arduino Uno. Unique to this board is that the IO voltage can be set to either 5V or 3.3V with the on-board switch...
€11.50
Ex Tax:€9.50