LilyGO T-Internet PoE V2 ESP32 - LAN8720A
- Availability: Directly available from warehouse in Eindhoven
- SKU: 007503
€20.00
Ex Tax: €16.53
Your shopping cart is empty!
A development board from LilyGO TTGO based on a ESP32 microcontroller by Espressif. For extra connectivity, the board has multiple wireless communication interfaces (including Wi-Fi/Bluetooth). The module also includes an Ethernet connector for a wired internet connection, which also supports power via Power over Ethernet (PoE) (provided a PoE injector is connected to the Ethernet connection).
Note: The USB-C port on this module is only intended to power the module. To program this module, the following module is required (see images): TTGO TTL USB Serial Port Adapter for T-Internet PoE
Note: To use the PoE function, a switch or router that supports PoE or a PoE injector is required.
See the following page for more information: GitHub
| General | |
| Brand | LilyGO TTGO |
| Manufacturer model/SKU | H438-01 |
| Model revision | V1.2 |
| Features | PoE SD-card adapter Microcontroller (MCU) |
| General physical appearance | |
| Main color | Black |
| Weight [g] | 21 |
| Dimension X [mm] | 65 |
| Dimension Y [mm] | 46 |
| Mounting options | Mounting hole(s) |
| Diameter mounting hole(s) [mm] | 3 |
| General electrical properties | |
| Minimum supply voltage [V DC] | 3.3 (via 3V3 pins) 5 (via USB-C) 36 (via PoE) |
| Maximum supply voltage [V DC] | 57 (via PoE) 5 (via USB-C) 3.3 (via 3V3 pins) |
| Minimum IO-pin input voltage [V] | 3.3 |
| Maximum IO-pin input voltage [V] | 3.3 |
| IO-pin output voltage [V] | 3.3 |
| Maximum IO-pin source current [mA] | 20 |
| Maximum IO-pin sink current [mA] | 28 |
| MCU | |
| Manufacturer | Espressif |
| Chip series | ESP32 |
| Maximum clock frequency [MHz] | 240 |
| Number of cores | 2 |
| Internal memory | |
| SRAM [KB] | 520 |
| PSRAM [MB] | 0 |
| Flash memory [MB] | 4 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC DAC I2C I2S PWM SPI GPIO UART USB CDC Ethernet |
| Available GPIO pins | 0, 1, 2, 3, 4, 12, 14, 15, 16, 32, 33, 34, 35, 36 |
| Number of IO-pins | 14 |
| Maximum available hardware PWM channels | 11 |
| Maximum available analog input pins (ADC) | 11 |
| Maximum available analog output pins (DAC) | 0 |
| Maximum available hardware UART interfaces | 3 |
| Maximum available hardware I2C interfaces | 2 |
| Maximum available hardware SPI interfaces | 2 |
| USB to serial converter | None |
| Ethernet chip/SoC | LAN8720A |
| Supported SD card size | Micro SD |
| Wireless communication | |
| Interface(s) | Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | ESP32 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32 |
| Bluetooth version | 4.2 |
| Supported Bluetooth standard(s) | LE Classic |
| Voltage converter | |
| Chip/SoC | DP9900 (PoE) |
| Voltage converter type | Buck |
| Conversion | DC-DC |
| Isolated | Yes |
| Connectors | |
| Power supply connector(s) | RJ45 female USB-C female |
| IO-connector(s) | RJ45 female Through hole solder pin(s) (2.54mm) |
| Input voltage connector(s) | RJ45 female |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna |
| Package contents | |
| Package contents | 1x T-Internet-POE V2 1x Female pin header 6p 2mm 1x Male pin header 2x8p |