Model: AMS1117-3.3VBREAKOUT
This module is suitable for making an extra 3.3V supply of eg a 5V power supply.
Specifications:
Voltage range: 4.5-7VDC
Maximum current: 800mA
LED indicates by way of indication whether the module is powered.
Dimensions: 25x11mm
..
€0.80
Ex Tax:€0.66
Model: AMS1117-3.3VCOMPACT
This model can be used to create an extra 3.3V power supply from a 5V supply.
Specifications:
Input voltage range: 4.5-7VDC
Maximum current: 800 mA
LED indicates if the module is powered
The pin names on the board indica..
€0.75
Ex Tax:€0.62
Model: AMS1117-3.3VBRKOUT-HEAD
This module is suitable for making an extra 3.3V power supply from, for example, a 5V power supply.
Specifications:
Voltage range: 4.5-7VDC
Maximum current: 800mA
LED indicates if the module is powered.
Dimensions: 25x11mm
The pin..
€0.75
Ex Tax:€0.62
Model: BREADPOWER
Power supply for your breadboard. Compatible with the Breadboard 400 and Breadboard 830.
Both supply lines can be set to 0V, 5V or 3.3V. Very easy for when you have a module that needs 3.3V for example.
A USB connection (only output!) that supp..
€2.50
Ex Tax:€2.07
Model: BREADPOWERWHITE
Power supply for your breadboard. Compatible with the Breadboard 400 and Breadboard 830.
Both power lines can be easily set for 0V, 5V or 3.3V. Very easy if you have a module that needs 3.3V.
A Mini USB input with a self-healing fuse, and a DC ..
€2.50
Ex Tax:€2.07
Model: 7805DC-DC
A step-down converter the size of an LM7805.
Pinout:
1 (market with white dot): Input voltage
2: Ground
3: Output voltage
* Note: This DC-DC converter requires the following capacitors for optimal operation: 10uF 25V ..
€2.50
Ex Tax:€2.07
Model: DFROBOT-DFR1015
Brand: DFRobot
A step-down converter where the output voltage can be changed by shorting a solder connection, the converter is set to 5V by default. To set a different voltage, the 5V connection (see photos) must first be removed before connecting the soldering pad..
€6.50
Ex Tax:€5.37
Model: LM2596
A step-down converter can be used to easily lower the voltage in an efficient way.
Note: The potentiometer has several turns. So it may take a while before you have the desired voltage set correctly. You can rotate the potentiometer around 25x fro..
€3.00
Ex Tax:€2.48
Model: XL4015SEGMENT
A step-down converter with a handy built-in voltmeter for both the input voltage and the output voltage.
Working voltage meter:
Left button (on "IN" side): Turning the voltmeter on and off
Right button (on "OUT" side): Perform voltage meas..
€7.00
Ex Tax:€5.79
Model: XL4015CC
An adjustable step-down (buck) converter which can be used to lower the voltage of another voltage source. In addition, this module also has an adjustable current limiter.
Indication LEDs:
Red: Constant output current (current limiter enable..
€4.50
Ex Tax:€3.72
Model: DFROBOT-DFR0952
Brand: DFRobot
A step-up converter where the output voltage can be changed by adjusting solder joints, the converter is set to 12V by default. To set a lower voltage, 0Ω resistors can be removed...
€8.50
Ex Tax:€7.02
Model: MT3608
A step-up converter, always useful for a hobby project!
Specifications:
Input voltage: 2V-24V DC*
Output voltage: 5V-28V DC
Output current: 2A (max), 1A (recommended), <100mA (input <4.0V), <50mA (input <3.5V)
Module type: ..
€2.00
Ex Tax:€1.65
Model: MT3608-MICROUSB
A step-up converter, always useful for a hobby project! This is a variant of the standard MT3608 DC-DC module with a micro USB connection. In addition to the micro USB connection, the VIN+ and VIN connections can still be used.
Specifications:
..
€2.00
Ex Tax:€1.65
Model: ADJDCDC-SX1308-2A
An adjustable step-up boost converter, always useful for a hobby project!
Specifications:
Input voltage: 2-24V DC*
Output voltage: 2-28V DC
Output current: 2A (max), 1A (recommended), <100mA (input <4.0V), <50mA (input <3.5V)..
€2.00
Ex Tax:€1.65
Model: XL6009
A step-up converter can be used to easily increase the voltage in an efficient way.
Specifications:
Module type: Non-isolated step-up (Boost)
Rectification: Non-synchronous rectification
Input voltage: 5V-32V
Output voltage: 5V-35V
I..
€3.50
Ex Tax:€2.89
Model: XL6009UPDOWN
You can set a voltage on this DC-DC converter and the converter itself will determine whether it should reduce or increase the voltage.
Specifications:
Module type: Non-insulated step-up/down (Buck/Boost)
Rectification: Non-synchronous rec..
€4.00
Ex Tax:€3.31
Model: DFROBOT-DFR0753
Brand: DFRobot
A small but powerful DC-DC buck converter. This step-down converter has a fixed 5V output...
€8.50
Ex Tax:€7.02
Model: DFROBOT-DFR0758
A handy DC-DC buck converter that supports fast charging with handy connections such as a DC jack and USB-C connection...
€8.00
Ex Tax:€6.61
Model: DCDCSTEPDOWN3.3V
A step-down converter, always handy for a hobby project!
Specificaties:
Input voltage: 5.3V-26V
Output voltage: 3.3V
Output current: 1.5A (continuous), 3A (short-term)
Conversion efficiency: 96% (highest at 2V difference between..
€3.00
Ex Tax:€2.48
Model: DCDCSTEPDOWN5V
A step-down converter, always handy for a hobby project!
Specifications:
Input voltage: 7 - 26V DC
Output voltage: 5V DC
Output current: 1.5A (continuous), 3A (short-term)
Conversion efficiency: 96% (highest at 2V difference bet..
€3.00
Ex Tax:€2.48
Model: DCDCSTEPDOWN4A12V
A step-down converter, always handy for a hobby project!..
€3.00
Ex Tax:€2.48
Model: DCDCSTEPDOWN4A9V
A step-down converter, always handy for a hobby project!..
€3.00
Ex Tax:€2.48
Model: DCDCSTEPDOWN5A3.3V
A step-down converter, always handy for a hobby project!..
€3.00
Ex Tax:€2.48
Model: DCDCSTEPDOWN5A5V
A step-down converter, always handy for a hobby project!..
€3.00
Ex Tax:€2.48
Model: DCDC-CHARGEPUMP-3.3V100MA
A very small DC-DC converter module that uses a "Charge Pump" system. The converter is well suited to power a small 3.3V load from, for example, a Li-ion or Li-Po battery...
€2.00
Ex Tax:€1.65
Model: DCDCBOOST5V2A
A small boost converter with an output voltage of 5V. This converter is ideal to use in combination with a Li-ion or Li-Po battery.
Specifications:
Input voltage: 2.7 - 5V DC*
Output voltage: 5V DC
Maximum output current: 2A
Maximum ou..
€3.00
Ex Tax:€2.48
Model: S08-BUCKBOOST-3.3V
A step-down and step-up (buck and boost) converter with a fixed output voltage. Can be used to decrease or increase the voltage of, for example, a battery or other voltage source.
Specifications:
Input voltage: 2.5 - 15V DC
Output voltage:..
€3.00
Ex Tax:€2.48
Model: S08-BUCKBOOST-5V
A step-down and step-up (buck and boost) converter with a fixed output voltage. Can be used to decrease or increase the voltage of, for example, a battery or other voltage source.
Specifications:
Input voltage: 2.5 - 15V DC
Output voltage:..
€3.00
Ex Tax:€2.48
Model: WIRELESSDCDC5V1A
With this module you can wirelessly convert/transport power.
Specifications:
Input voltage: 5-12 V
Output voltage: 5 V
Maximum output current: 1 A
Diameter transmitter coil 40 mm, thickness 1.8 mm
Diameter receiver coil 40mm, thickne..
€7.00
Ex Tax:€5.79
Model: WIRELESSDCDC5V2A
With this module you can wirelessly convert/transport power.
Specifications:
Input voltage: 9-12 V
Output voltage: 5 V
Maximum output current: 2 A
Diameter transmit coil 43 mm, thickness 2.3 mm
Diameter receiver coil 43mm, thickness ..
€12.00
Ex Tax:€9.92
Model: WIRELESSDCDC5V500MA
With this module you can wirelessly convert/transport power.
Specifications:
Input voltage: 5-12 V
Output voltage: 5 V
Maximum output current: 0.5 A
Diameter transmitter coil 40 mm, thickness 1.8 mm
Diameter receiver coil 40mm, thick..
€9.00
Ex Tax:€7.44
Model: DFROBOT-DFR1025
A step-down DC-DC converter where the output voltage can easily be changed with a DIP switch...
€11.00
Ex Tax:€9.09
Model: HLK-5D1212
..
€6.00
Ex Tax:€4.96
Model: HLK-1D1212
..
€4.50
Ex Tax:€3.72
Model: HLK-5D1205
Note: Hi-Link has changed the model number from HLK-5D1205 to HLK-VRB1205YMD-5WR3. Internally, however, the product has remained exactly the same...
€6.00
Ex Tax:€4.96
Model: HLK-1D1205
..
€4.50
Ex Tax:€3.72
Model: HLK-1D0512A
..
€4.50
Ex Tax:€3.72
Model: HLK-1D0505A
..
€4.00
Ex Tax:€3.31
Model: MH-CD42
This module has a built-in li-ion charge, 5V boost and protection circuit against over and under voltage, over temperature (chip) and short-circuit protection.
Specifications:
Input voltage (Vin): DC 4.5V - 5.5V (5V recommended)
Input curr..
€3.00
Ex Tax:€2.48
Model: LILYPADAAASTEPUP
This module contains a AAA battery holder and a step-up converter that makes the battery voltage a 5V voltage.
The module is also equipped with a polyfuse (self-resetting fuse), so you can never draw too much current from the step-up converter.
Wit..
€5.00
Ex Tax:€4.13
Model: LILYPADLIPOWER
A li-ion or li-po to 5V module especially for LilyPad products.
This module has a connection for a li-ion or li-po battery and has a step-up converter built in which converts the voltage of the battery to 5V.
Pinout:
- pads: common..
€6.00
Ex Tax:€4.96
Model: LM317CERPOTDIYKIT
With this do-it-yourself kit you make an adjustable voltage regulator based on the LM317.
Specifications:
Input voltage: 5.0-25VDC, 6.0-18VAC
Maximum output voltage: Input voltage-2.5V
Maximum output current: 1.0A
PCB size: 62x44mm
..
€4.00
Ex Tax:€3.31
Model: LM317STDPOTDIYKIT
With this do-it-yourself kit you make an adjustable voltage regulator based on the LM317.
Specifications:
Input voltage: 5.0-25VDC, 6.0-20VAC
Output voltage: 1.25VDC-12VDC
Maximum output current: 1.0A
PCB format: 60x32mm
Note: A h..
€4.00
Ex Tax:€3.31
Model: LM317MOD
A simple adjustable linear voltage regulator.
Specifications:
Input voltage: 4.25 - 40V DC
Output voltage: 1.25 - 37V DC (input voltage - 2.5V)
Maximum output current*: 1.5A (2.2A peak)
Module type: Linear voltage regulator
Protectio..
€2.50
Ex Tax:€2.07
Model: M5STACK-M132
Brand: M5Stack
The M5Stack DIN base is a module made to easily mount the M5Core on a DIN rail. In addition, the module also has a built-in battery and a built-in buck converter to power the M5Core via a higher voltage...
€10.50
Ex Tax:€8.68
Model: M5STACK-S005
Brand: M5Stack
A power management module from M5Stack including a battery charger and an RTC. The module also has a boost and a buck converter that convert the battery voltage to 5V and 3.3V, respectively. The specifications in the table below refer to the boost co..
€9.50
Ex Tax:€7.85