Model: HLK-URB2415YMD-5WR3
A simple isolated DC-DC voltage converter. This converter is well suited, for example, to create a negative voltage for an op-amp circuit...
€6.00
Ex Tax:€4.96
Model: HLK-URB2424YMD-5WR3
A simple isolated DC-DC voltage converter. This converter is well suited, for example, to create a negative voltage for an op-amp circuit...
€6.00
Ex Tax:€4.96
Model: HLK-URB2405YMD-5WR3
A simple isolated DC-DC voltage converter. This converter is well suited, for example, to create a negative voltage for an op-amp circuit...
€6.00
Ex Tax:€4.96
Model: KS0534
Power supply for your breadboard. Compatible with the Breadboard 400 and Breadboard 830...
€3.25
Ex Tax:€2.69
Model: MH-CD42
This module has a built-in li-ion charge, 5V boost and protection circuit against over and under voltage, over temperature (chip) and short-circuit protection.
Specifications:
Input voltage (Vin): DC 4.5V - 5.5V (5V recommended)
Input curr..
€3.00
Ex Tax:€2.48
Model: LILYGO-H675
The LilyGO T-ETH Lite PoE shield is compatible with all versions of the LilyGO T-ETH Lite...
€13.25
Ex Tax:€10.95
Model: LILYPADAAASTEPUP
This module contains a AAA battery holder and a step-up converter that makes the battery voltage a 5V voltage.
The module is also equipped with a polyfuse (self-resetting fuse), so you can never draw too much current from the step-up converter.
Wit..
€5.00
Ex Tax:€4.13
Model: LILYPADLIPOWER
A li-ion or li-po to 5V module especially for LilyPad products.
This module has a connection for a li-ion or li-po battery and has a step-up converter built in which converts the voltage of the battery to 5V.
Pinout:
- pads: common..
€6.00
Ex Tax:€4.96
Model: LM317CERPOTDIYKIT
With this do-it-yourself kit you make an adjustable voltage regulator based on the LM317.
Specifications:
Input voltage: 5.0-25VDC, 6.0-18VAC
Maximum output voltage: Input voltage-2.5V
Maximum output current: 1.0A
PCB size: 62x44mm
..
€4.00
Ex Tax:€3.31
Model: LM317STDPOTDIYKIT
With this do-it-yourself kit you make an adjustable voltage regulator based on the LM317.
Specifications:
Input voltage: 5.0-25VDC, 6.0-20VAC
Output voltage: 1.25VDC-12VDC
Maximum output current: 1.0A
PCB format: 60x32mm
Note: A h..
€4.00
Ex Tax:€3.31
Model: LM317MOD
A simple adjustable linear voltage regulator.
Specifications:
Input voltage: 4.25 - 40V DC
Output voltage: 1.25 - 37V DC (input voltage - 2.5V)
Maximum output current*: 1.5A (2.2A peak)
Module type: Linear voltage regulator
Protectio..
€2.50
Ex Tax:€2.07
Model: M5STACK-M132
Brand: M5Stack
The M5Stack DIN base is a module made to easily mount the M5Core on a DIN rail. In addition, the module also has a built-in battery and a built-in buck converter to power the M5Core via a higher voltage...
€12.25
Ex Tax:€10.12
Model: M5STACK-S005
Brand: M5Stack
A power management module from M5Stack including a battery charger and an RTC. The module also has a boost and a buck converter that convert the battery voltage to 5V and 3.3V, respectively. The specifications in the table below refer to the boost co..
€9.50
Ex Tax:€7.85
Model: M5STACK-M137
Brand: M5Stack
This is a programmable power supply (PPS) from M5Stack made for the M5Core series. Both the output voltage and output current can be set and read back. The module is calibrated from the factory and comes with a calibration report...
€29.00
Ex Tax:€23.97
Model: MINIDCDCBOOST3.3V
A small boost converter with output voltage of 3.3V.
Specifications:
Input voltage range: 0.8 - 3.3V
Output voltage: 3.3V (fixed)
Output current: 400 mA (max)
Efficiency: 85% (max, based on input voltage and output current)
Dim..
€2.00
Ex Tax:€1.65
Model: MINIDCDCBOOST5V
A small boost converter with output voltage of 5V.
Specifications:
Input voltage range: 0.9 - 5V
Output voltage: 5V (fixed)
Output current: 480 mA (max)
Efficiency: ~85%
Dimensions: 11 x 10.5 x 7.5 mm
The maxim..
€2.00
Ex Tax:€1.65
2-4 Weeks
Model: MP2307
A very compact DC-DC step-down converter.
Tip: use extra capacitors (more than 100uF) on the input and output to produce a more stable voltage...
€1.50
Ex Tax:€1.24
2-4 Weeks
Model: MP1584
A very compact DC-DC step-down converter.
Tip: use extra capacitors (more than 100uF) on the input and output to produce a more stable voltage...
€1.50
Ex Tax:€1.24
Model: OL-BB-PWR-3608
A small step-up boost converter from Olimex. Very handy to use on a breadboard (see pictures). The output voltage can be adjusted using a solder bridge, by default it is set to 12V.
Note: Breadboard is not included...
€4.50
Ex Tax:€3.72
Model: OL-BB-PWR-8009
A small step-down buck converter from Olimex. Very handy to use on a breadboard (see pictures).
Note: Breadboard is not included...
€4.50
Ex Tax:€3.72
Model: OL-BB-PWR-8113
A small step-down buck converter from Olimex. Very handy to use on a breadboard (see pictures).
Note: Breadboard is not included...
€4.50
Ex Tax:€3.72
2-4 Weeks
Model: OL-USB-PWR
With the USB-PWR from Olimex you can easily supply a breadboard with 3.3V or 5V (adjustable via a jumper)...
€2.00
Ex Tax:€1.65
Model: PLD278
A small buck converter that delivers a constant current, ideal for driving one or more high-power LEDs in series. By default the module delivers a constant current of ~278mA, but when the solder bridge is connected, it delivers ~556mA. In addition, t..
€3.75
Ex Tax:€3.10
Model: PLD333
A small buck converter that delivers a constant current, ideal for driving one or more high-power LEDs in series. By default the module delivers a constant current of ~333mA, but when the solder bridge is connected, it delivers ~667mA. In addition, t..
€3.75
Ex Tax:€3.10
Model: QS-0305-15W
A step-up boost converter with undervoltage protection. This DC-DC converter has a fixed output voltage of 5V.
Specifications:
Module type: Non-isolated step-up (boost)
Input voltage: 3-5V DC
Input undervoltage protection: 2.7V DC (LED i..
€6.00
Ex Tax:€4.96
Model: QS-2405CBD-2A
An adjustable step-down (buck) converter from QSKJ.
Note: For long-term use, we recommend using a maximum input and output voltage of 30V DC to increase the lifetime of the capacitors.
Note: The potentiometer is multiple turns. It may take a wh..
€3.00
Ex Tax:€2.48
Model: QS-2405CBD-5A
An adjustable 75W step-down buck converter from QSKJ with short circuit and overheating protection. The module can be used to reduce the voltage of, for example, a battery or other power source.
Note: For long-term use, we recommend using a maximu..
€3.50
Ex Tax:€2.89
Model: DC-DCDOWN200W
A powerful step-down converter, for example to lower your 24V battery to 12V.
In addition, this DC-DC converter also has a current limiter built in which is adjustable with a potentiometer.
The maximum output current can be increased by turning t..
€7.00
Ex Tax:€5.79
2-4 Weeks
Model: QS-1212CBDE-20W
An adjustable 20W step-down and step-up, buck and boost converter. Can be used to increase or decrease the voltage of, for example, a battery or other voltage source.
Specifications:
Module type: Non-isolated step-down/up (buck/boost)
Inpu..
€4.00
Ex Tax:€3.31
Model: DC-DC150W
A powerful step-up converter, eg to boost your 12V battery to 24V . For example,to get the most out of your TPA3116 amplifier when using 12V.
Module type: Non-insulated step-up (Boost)
Rectification: Non-synchronous rectification
Input vol..
€6.00
Ex Tax:€4.96
Model: DC-DC150W-CC
A powerful step-up converter with current limiter (adjustable constant current) and undervoltage protection, for example to boost your 12V battery to 24V.
Specifications:
Module type: Non-insulated step-up (Boost)
Rectification: Non-synchr..
€7.00
Ex Tax:€5.79
Model: QS-2448CCBD-600W
A powerful step-up converter with current limiter (adjustable constant current) and undervoltage protection, for example to boost your 12V battery to 24V.
Specifications:
Module type: Non-isolated step-up (Boost)
Rectification: Non-synchro..
€9.50
Ex Tax:€7.85
Model: QS-0524CBDE-15W
An adjustable step-up (boost) converter from QSKJ.
Specifications:
Module type: Non-isolated step-up (boost)
Input voltage: 5-32V DC*
Maximum input current: 4A
Output voltage: 5-50V DC* (adjustable with the potentiometer**)
Maximum o..
€3.50
Ex Tax:€2.89
Model: QS-1212CBA-150W
A powerful adjustable step-down and step-up (buck-boost) converter from QSKJ which is neatly finished in a metal housing. The converter has an LED status indicator and an enable (EN) pin. This pin is pulled-up by default, if it is connected to ground..
€44.50
Ex Tax:€36.78
Model: DCDCSTEPDOWN5VUSB
A DC-DC step-down buck converter with USB(5V) output...
€2.50
Ex Tax:€2.07
Model: DCDCSTEPDOWN5V4XUSB
A DC-DC step-down buck converter with 4 USB (5V) outputs.
Specifications:
Input voltage: 8-35V DC
Output current (total): 8A max (6.4A continuous)
Output current per USB port: 2A max
Output voltage: ~5.2V DC
Efficiency: 95.8% m..
€6.00
Ex Tax:€4.96
2-4 Weeks
Model: MINIDC-DCSD2A
A very compact DC-DC step-down converter.
Pin description:
VO+: Output voltage
GND: Ground/min (shared with input and output)
IN+: Input voltage
EN: Enable pin (connect to ground to disable DC-DC converter)
If you need a fixed out..
€2.50
Ex Tax:€2.07
2-4 Weeks
Model: RA017
A Power over Ethernet (PoE) made for the single board computers from Radxa...
€20.50
Ex Tax:€16.94
Model: RAK-110049
A voltage converter module from RAKwireless.
Note: Unlike most other products from RAKwireless, this module does not have a WisBlock connector.
Note: To start the output, the module needs at least 5.3V on the input once. After that, a lower inp..
€10.50
Ex Tax:€8.68
Model: RAK-110104
A power module from RAKwireless for the modular WisBlock system. The module has a connector for a Li-Po/Li-ion battery and a USB-C connector to program and/or power the WisBlock Core.
Note: This module does not contain a charging and/or protection..
€10.25
Ex Tax:€8.47
Model: RAK-100090
A battery adapter module from RAKwireless for the WisBlock system.
Note: This module does not contain a charging and/or protection circuit...
€6.25
Ex Tax:€5.17
New
Model: RAK-100095
A power over ethernet (PoE) module for the RAK13800 ethernet module from RAKwireless.
Note: RAK13800 ethernet module is not included...
€18.75
Ex Tax:€15.50
Model: X1010
This PCIe FFC to PCIe x4 slot adapter board from SupTronics can be used to, for example, connect an SSD or GPU to the Raspberry Pi 5. The board also functions as power supply for the Raspberry Pi and PCIe device.
Note: Do not power the module via ..
€18.75
Ex Tax:€15.50
Model: X1012
This PCIe to M.2 adapter board from SupTronics allows, for example, an NVMe M.2 SSD to be connected to the Raspberry Pi 5. The board can also function as power supply via PoE or the DC-jack...
€23.25
Ex Tax:€19.21
Model: USBADJDCDC3WSEGMENT
A step-up-down (buck-boost) DC-DC converter with a USB male and micro USB connection. This module has a potentiometer for setting the output voltage and a voltage meter with display to measure the output voltage. The display can be turned off with a ..
€3.50
Ex Tax:€2.89
Model: USBDCDC1000LI-ION
A complete DC-DC converter to boost the Li-ion voltage to 5V USB voltage. This module has a built-in li-ion charge and protection circuit against over- and undervoltage, overtemperature (chip) and short-circuit protection.
This is therefore very s..
€2.50
Ex Tax:€2.07
Model: USBDCDC600
A DC-DC converter to boost low voltage to 5V USB voltage.
Specifications:
Range of input voltage (Vin): 0.9V - 5.0V
Output voltage: 5.0V
Efficiency: up to 96%
Output current: Fin> = 0.9V: 100mA, Fin> = 1.5V: 200mA, Fin&..
€1.50
Ex Tax:€1.24
Model: USBDC-DCQC3.0
A DC-DC converter to lower a high voltage to 5V USB voltage with fast charging function.
Specifications:
Input voltage range (Vin): 6V - 32V
Output: 5.0V with 3.4A, 9V*with 2.5A and 12V ** with 2A
Efficiency: 90-97%
LED indicating the ..
€3.50
Ex Tax:€2.89