Model: LJ8A3-2-Z/BX
An inductive proximity/distance sensor that can detect metallic objects at close range. As soon as a metal object is detected, the signal wire and ground are connected with a transistor. If no object is detected, the signal wire takes the voltage of ..
€4.50
Ex Tax:€3.72
Model: LM35DZ
A small but accurate temperature sensor in TO-92 package. The sensor has an analogue output.
Specifications:
Supply voltage: 4-30V DC
Output voltage: 0mV + 10.0 mV/°C
For more information: Datasheet..
€1.80
Ex Tax:€1.49
Model: LOADCELL10KG
You can measure up to 10kg with this load cell.
Specifications:
Range weight: 0-10kg
Recommended control voltage: 5-10V (maximum 10V)
Dimensions: 12.7 x 12.7 x 75mm (type 1*) or 12.7 x 12.7 x 80mm (type 2*)
Four holes for M4 bolts (typ..
€5.00
Ex Tax:€4.13
Model: LOADCELL1KG
With this load cell weights up to 1 kg can be measured.
Specifications:
Range weight: 0-1kg
Recommended control voltage: 5-10V (maximum 10V)
Dimensions: 12.7 x 12.7 x 75mm (type 1*) or 12.7 x 12.7 x 80mm (type 2*)
Four holes for M4 bol..
€5.00
Ex Tax:€4.13
Model: LOADCELL20KG
You can measure up to 20kg with this load cell.
Specifications:
Range weight: 0-20kg
Recommended control voltage: 5-10V (maximum 10V)
Dimensions: 12.7 x 12.7 x 75mm (type 1*) or 12.7 x 12.7 x 80mm (type 2*)
Four holes for M4 bolts (typ..
€5.00
Ex Tax:€4.13
Model: LOADCELL50KG
With this load cell up to 50 kg of weight can be measured.
We recommend using four load cells to create a scale.
This page explains how to do this in combination with de Load Cell Amplifier - HX711 and Arduino: Arduino Bathroom Scale With 50 Kg L..
€3.00
Ex Tax:€2.48
Model: LOADCELL5KG
You can measure up to 5kg with this load cell.
Specifications:
Range weight: 0-5kg
Recommended control voltage: 5-10V (maximum 10V)
Dimensions: 12.7 x 12.7 x 75mm (type 1*) or 12.7 x 12.7 x 80mm (type 2*)
Four holes for M4 bolts (type ..
€5.00
Ex Tax:€4.13
Model: HX711MOD
A small module that is needed to correctly read load cells.
The HX711 chip amplifies the signal so that the variations of the load cell can be digitally processed on the Arduino.
Specifications:
Voltage range: 5V DC*
Nominal power consump..
€2.00
Ex Tax:€1.65
Model: M5STACK-U095
Brand: M5Stack
This is a 6-axis module with 3-axis accelerometer, 3-axis gyroscope and a Grove connection for M5Stack. The module works via I2C communication.
Specifications:
Sensor: MPU6886
Gyroscope: 3-axis (x, y, z)
Accelerometer: 3-axis (x, y,..
€10.50
Ex Tax:€8.68
Model: M5STACK-U056
Brand: M5Stack
This is a 3-axis accelerometer module with a Grove connection for M5Stack. The module works via I2C communication.
Specifications:
Sensor: ADXL345
3-axis (x, y, z)
Resolution: 13-bit
Measurements up to ±16g
I2C address: 0..
€6.00
Ex Tax:€4.96
Last chance
Model: M5STACK-U069
Brand: M5Stack
This is a module with a 16-bit analog to digital converter for M5StickC. The module works via I2C communication.
Specifications:
Measuring voltage range: 0~12VDC
Chip: ADS1100
Resolution: 16-bit
I2C address: 0x48
2x LEGO® compatible ..
€7.50 €11.00
Ex Tax:€6.20
Model: M5STACK-U013-V11
Brand: M5Stack
This is a module with an analog to digital converter (ADC) from M5Stack. The module works via I2C communication and allows you to modify the sample rate, enabling you to achieve various ADC resolutions...
€8.50
Ex Tax:€7.02
Model: M5STACK-U162
The AIN4-20mA Unit is a module that can read sensors that provide an analog signal between 4-20mA. The analog signal is converted by the built-in microcontroller (STM32G030) to a digital value that can be read out via I2C. The module supports both se..
€9.50
Ex Tax:€7.85
Model: M5STACK-U134
Brand: M5Stack
This is an ambient light sensor hat for M5StickC. The module works via I2C communication...
€7.50
Ex Tax:€6.20
Model: M5STACK-U136
Brand: M5Stack
This is an ambient light sensor module with a Grove connection for M5Stack. The module works via I2C communication...
€7.00
Ex Tax:€5.79
Model: M5STACK-U086
Brand: M5Stack
This is an isolated current sensor module with a Grove connection for M5Stack. The module contains a 16-bit ADC (analog to digital) converter, namely the ADS1115. The sensor is factory calibrated with the calibration data stored in the built-in EEPRO..
€11.50
Ex Tax:€9.50
Model: M5STACK-A133-B
Brand: M5Stack
The M5Stack Atomic QR-Code Scanner 2 Base is a compact 1D/2D barcode scanner, specially designed for the Atom series of M5Stack...
€21.25
Ex Tax:€17.56
Model: M5STACK-K041-B
Brand: M5Stack
The Atomic QR-CODE Reader is an M5Atom compatible module for reading Barcodes and QR-Codes. The reader contains 2 parts: The QR-Code reader module and the M5Atom Lite (included)...
€68.00
Ex Tax:€56.20
Model: M5STACK-A133
Brand: M5Stack
The Atomic QR-CODE Reader is an M5Atom compatible module for reading Barcodes and QR-Codes. The reader contains 2 parts: The QR-Code reader module and the M5Atom Lite (included).
Note: This product does not contain an M5Atom, click here for the ..
€56.25
Ex Tax:€46.49
Model: M5STACK-U090
Brand: M5Stack
This is a barometric air pressure sensor module with a Grove connection for M5Stack. The module works via I2C communication.
Specifications:
Sensor: BMP280
Measuring range air pressure: 300-1100hPa
Air pressure resolution: 0.16hPa
..
€6.00
Ex Tax:€4.96
Model: M5STACK-A011-B
Brand: M5Stack
The M5Stack BTC Standing Base is a standard for the M5Core. With the standard you provide the M5Core with power. It also has a built-in SHT30 temperature and humidity sensor that works with I2C communication.
Specifications:
Input voltage: 5..
€9.75
Ex Tax:€8.06
New
Model: M5STACK-U209
Brand: M5Stack
A module from M5Stack with a Time-of-Flight ToF distance sensor for the modular chain system...
€10.50
Ex Tax:€8.68
Model: M5STACK-U103
Brand: M5Stack
A CO2 sensor, humidity sensor and a temperature sensor in one of M5Stack...
€39.00
Ex Tax:€32.23
Model: M5STACK-U104
Brand: M5Stack
A CO2 sensor, humidity sensor and a temperature sensor in one of M5Stack...
€51.00
Ex Tax:€42.15
Model: M5STACK-U009
Brand: M5Stack
The M5Stack Color Unit is an RGB color sensor module for M5Stack. The module works via I2C communication.
Specifications:
Sensor: TCS3472
I2C address: 0x29
2x LEGO® holes for mounting
Grove connection
Package contents:
1x Co..
€13.00
Ex Tax:€10.74
Model: M5STACK-M127
Brand: M5Stack
The M5Stack Dual Kmeter Module 13.2 is a temperature measurement module with two channels. Internally there is an STM32 microcontroller that controls communication with the temperature sensors. That data from the STM32 can then be read out via I2C. T..
€28.50
Ex Tax:€23.55
Model: M5STACK-U019
Brand: M5Stack
This is a module with a soil moisture sensor for M5Stack.
Specifications:
Analog and digital output (high/low)
Type of soil moisture sensor: Resistive
Adjustable threshold value for digital output via potentiometer
2x LEGO® compatible ..
€4.50
Ex Tax:€3.72
Model: M5STACK-M034
Brand: M5Stack
This ECG Module 13.2 from M5Stack can be used to measure your heart rate.
Specifications:
Input voltage: 5V DC
Communication: UART (115200bps)
Dimensions: 54 x 54 x 13.2mm
Package contents:
1x M5Stack ECG Module 13.2
6x Disp..
€47.00
Ex Tax:€38.84
Model: M5STACK-U053-D
Brand: M5Stack
Note: When the ENV Hat is used in combination with an M5Stick that is continuously on or being charged, it is possible that the temperature read out is higher than reality. This is due to heat development of the (charging) chip of the M5Stick...
€11.00
Ex Tax:€9.09
Model: M5STACK-U001-C
Brand: M5Stack
The ENV III Unit is an upgrade of the ENV II and ENV Unit. This module has a temperature, humidity and air pressure sensor with a Grove connection for M5Stack.
The difference between the ENV III Unit and the ENV II Unit is that this one uses the Q..
€7.75
Ex Tax:€6.41
Model: M5STACK-U169
Brand: M5Stack
The ENV Pro Unit is a compact environmental sensor using the BME688 sensor. It measures air quality, temperature, humidity, and atmospheric pressure...
€22.00
Ex Tax:€18.18
Model: M5STACK-A066
Brand: M5Stack
This is an M5Stack FACES fingerprint module.
Specifications:
Interface Serial UART2 (16/17)
FPC1020A algorithm chip
Sensor surface area: 192*192 Pixels
Pixel resolution: 256 grayscale levels (8 Bit)
Operating temperature: - 40 to + 8..
€18.00
Ex Tax:€14.88
Model: M5STACK-U074
Brand: M5Stack
The M5Stack Finger Print Hat is an add-on for the M5StickC* with a built-in FPC1020SC fingerprint sensor.
Specifications:
Built-in FPC1020SC sensor
Designed for use with M5StickC*
UART communication
UART settings:
Baudrate:..
€24.00
Ex Tax:€19.83
Model: M5STACK-U203
Brand: M5Stack
The M5Stack Unit Fingerprint2 is a capacitive fingerprint recognition module. The module also features an RGB LED ring and can be controlled via UART...
€13.75
Ex Tax:€11.36
Model: M5STACK-U127
Brand: M5Stack
A hand gesture recognition sensor from M5Stack. With this you can easily recognize 9 different gestures.
Specifications:
Supply voltage: 5V DC
Signal voltage: 3.3V
Communication: I2C
I2C address: 0x73
Gesture Recognition Se..
€16.25
Ex Tax:€13.43
Model: M5STACK-M135
Brand: M5Stack
A GNSS module from M5Stack that also has various sensors. The module is made for the M5Core, there is optional space for an M5Stamp module for extra connectivity...
€55.00
Ex Tax:€45.45
Model: M5STACK-U148
Brand: M5Stack
A handy module from M5Stack to monitor the power consumption of another Unit via the built-in current sensor. The other unit can also be switched off completely via the built-in MOSFET switch...
€6.50
Ex Tax:€5.37
Model: M5STACK-U084
Brand: M5Stack
This is a Hall Effect module with a Grove connection for M5Stack. The module works via a GPIO port with which the status of the sensor can be read. Also, an LED indicates the status of the sensor.
Specifications:
Hall Sensor: A3144E
2x LEG..
€8.50
Ex Tax:€7.02
Discontinued
Model: M5STACK-U029
Brand: M5Stack
The M5Stack Heart Rate Unit is a heart rate sensor module. The Heart Rate Unit has a built-in MAX30100 sensor that measures heart rate through a finger.
Specifications:
Built-in MAX30100 sensor
2x LEGO® holes for mounting
Grove int..
€10.00
Ex Tax:€8.26
Model: M5STACK-U200
The INA226-10A Unit is an isolated voltage and current sensor that uses the INA226 chip...
€10.75
Ex Tax:€8.88
Model: M5STACK-U200-1A
The INA226-1A Unit is an isolated voltage and current sensor that uses the INA226 chip...
€10.75
Ex Tax:€8.88
Model: M5STACK-U175
This is a Reflective IR Unit for the M5Stack, designed to detect reflected infrared light from nearby objects. The module has both an analog and a digital output, of which the threshold is adjustable with a potentiometer...
€6.50
Ex Tax:€5.37
2-4 Weeks
Model: M5STACK-U133-V11
Brand: M5Stack
The M5Stack KMeterISO unit is a thermocouple temperature sensor where the sensor is galvanically isolated. Internally there is an STM32 microcontroller that controls communication with the temperature sensor via an isolated connection. That data from..
€18.25
Ex Tax:€15.08
2-4 Weeks
Model: M5STACK-U065
Brand: M5Stack
This is a laser receiver module with Grove connection for the M5Stack.
This works together with the M5Stack Laser TX Unit.
Specifications:
Wavelength receiver: 650nm
2x LEGO® compatible holes
1x Grove connection (1x Grove cabl..
€6.00
Ex Tax:€4.96
Model: M5STACK-U021
Brand: M5Stack
This is a unit with an LDR sensor for M5Stack with both a digital and analog output. ..
€5.50
Ex Tax:€4.55
Model: M5STACK-U096
Brand: M5Stack
This is a microphone module with a Grove connection for M5Stack. The MIC Unit has a built-in MAX4466 amplifier. The module can be read both with an analog and a digital pin (sound/no sound).
Specifications:
Built-in microphone amplifier: MAX..
€5.50
Ex Tax:€4.55
Model: M5STACK-U177
Brand: M5Stack
A small scale unit from M5Stack. The module communicates via I2C with a built-in microcontroller (STM32), which in turn communicates with a load cell amplifier...
€8.00
Ex Tax:€6.61
Model: M5STACK-U196
A compact Time-of-Flight distance sensor module from M5Stack...
€7.50
Ex Tax:€6.20