Model: M5STACK-U199
The MQ-5 Gas Sensor Module is a compact gas sensor that utilizes the MQ-5 sensor. It detects various combustible gases such as LPG, methane, and propane. The module contains a separate microcontroller that reads out the MQ-5. This microcontroller can..
€8.00
Ex Tax:€6.61
Model: M5STACK-U150
Brand: M5Stack
The NCIR 2 Unit is a temperature sensor module from M5Stack. This module has a built-in MLX90614 infrared sensor (IR) that is able to measure the temperature of various objects, including the human body...
€23.25
Ex Tax:€19.21
Model: M5STACK-U061
Brand: M5Stack
The NCIR Hat is a temperature sensor expansion for the M5StickC*. This module has a built-in MLX90614 infraredsensor that's able to measure the temperature of various objects, including the human body.
Specifications:
Input voltage: 4...
€11.50
Ex Tax:€9.50
Model: M5STACK-U028
Brand: M5Stack
The NCIR Unit is a temperature sensor module from M5Stack. This module has a built-in MLX90614 infrared sensor (IR) that is able to measure the temperature of various objects, including the human body.
Specifications:
Input voltage: 4...
€20.25
Ex Tax:€16.74
Model: M5STACK-U058
Brand: M5Stack
This is a light slot sensor module with a Grove connection for M5Stack. ..
€4.00
Ex Tax:€3.31
Model: M5STACK-U057
Brand: M5Stack
This is a light slot sensor module with a Grove connection for M5Stack.
Specifications:
ITR9606 sensor (IR sensor)
Angle of sensor relative to module: 90 degrees
2x LEGO® compatible holes
1x Grove connection (1x Grove cable inclu..
€4.00
Ex Tax:€3.31
Model: M5STACK-U089
Brand: M5Stack
This is a Microphone module with a HY2.0 4P (Grove) connection for M5Stack. The module works via I2S communication.
Specifications:
Microphone: SPM1423
Low power consumption (~600uA)
2x LEGO® compatible holes
Dimensions: 24x24x13m..
€4.50
Ex Tax:€3.72
Model: M5STACK-U054
Brand: M5Stack
This is a PIR motion sensor module for the M5Stick.
Specifications:
Delay time: 2s
Quiescent current: <60uA
Detection distance: approximately 150cm
Angle of Sensor: <100°
Package content:
1x PIR Hat
See the ..
€4.00
Ex Tax:€3.31
Model: M5STACK-U004
Brand: M5Stack
This is a PIR motion sensor module with a Grove connection for M5Stack.
Specifications:
Delay time: 2s
Quiescent current: <60uA
Detection distance: approximately 150cm
Angle of Sensor: <100°
2x LEGO® compatible holes
1x..
€7.50
Ex Tax:€6.20
Model: M5STACK-K023-B
Brand: M5Stack
This kit consists of an M5Stack Basic with pedestal and a PM2.5 Base module. This module consists of a PMSA003 laser dust sensor. The supplied pedestal contains a SHT30 temperature and humidity sensor...
€66.00
Ex Tax:€54.55
Model: M5STACK-M134
Brand: M5Stack
The PM2.5 air quality module from M5Stack with a PMSA003 laser dust sensor...
€32.75
Ex Tax:€27.07
Model: M5STACK-M145
Brand: M5Stack
The QR Code Scanner Module 13.2 from M5Stack is used for scanning 1D and 2D barcodes. It features an integrated buzzer and a toggle switch to select between UART and USB communication interfaces...
€21.50
Ex Tax:€17.77
Model: M5STACK-U173
Brand: M5Stack
A QR-Code and Barcode scanner module from M5Stack with CMOS imaging. The module works with the I2C or UART protocol, adjustable with a switch. The module includes a buzzer, trigger button and 2 LEDs for feedback. In addition, it comes with a removabl..
€21.00
Ex Tax:€17.36
Model: M5STACK-U126
Brand: M5Stack
This is an RTC module from M5Stack. With the built-in battery this module allows you to keep track of the time even when the power supply fails.
Specifications:
Supply voltage: 5V DC
Signal voltage: 3.3V
RTC:
Chip: HYM8563
Commu..
€7.00
Ex Tax:€5.79
Model: M5STACK-U108
This scale from M5Stack has an accurate load cell with a weighing range of up to 20kg...
€89.75
Ex Tax:€74.17
Model: M5STACK-U149
The Thermal Camera 2 Unit is the successor to the original Thermal Imager Unit. The module works via I2C with an internal microcontroller (ESP32) which in turn communicates with the thermal imager sensor...
€80.75
Ex Tax:€66.74
2-4 Weeks
Model: M5STACK-U016
Brand: M5Stack
This is a thermal camera with a Grove connection for M5Stack. The module works via I2C communication...
€100.75
Ex Tax:€83.26
Model: M5STACK-U072
Brand: M5Stack
This is a time-of-flight distance module for the M5StickC*.
Specifications:
Sensor: VL53L0X
Max. range: 2m
Processing time: <30ms
Wavelength laser: 940nm
I2C address: 0x29
Package contents:
1x ToF Hat
*Note:&..
€9.50
Ex Tax:€7.85
Model: M5STACK-U010
Brand: M5Stack
This is a time-of-flight distance module with a Grove connection for M5Stack.
Specifications:
Sensor: VL53L0X
Max. range: 2m
Processing time: <30ms
Wavelength laser: 940nm
I2C address: 0x29
2x LEGO® compatible holes
1x G..
€11.00
Ex Tax:€9.09
Model: M5STACK-U172
Brand: M5Stack
A Time-of-Flight distance sensor module from M5Stack. This sensor uses a laser to measure distances...
€10.75
Ex Tax:€8.88
Model: M5STACK-U088
Brand: M5Stack
This is a Gas Sensor module with a HY2.0 4P (Grove) connection for M5Stack. The module works via I2C communication.
Specifications:
Chip: SGP30
Measuring range:
Ethanol: 0 - 1000ppm
H2: 0 - 1000ppm
TVOC: 0 - 60000ppb
eCO2: 4..
€12.50
Ex Tax:€10.33
Last chance
Model: M5STACK-U098
Brand: M5Stack
This is an ultrasonic sensor module with a Grove connection for M5Stack. The module works via I2C communication.
Specifications:
Chip: RCWL-9600
Measuring distance: 20-1500mm
Resolution: 1mm
Sensor angle: ~20°
Interface: I2C
I2C ad..
€5.50 €6.50
Ex Tax:€4.55
Model: M5STACK-U100
Brand: M5Stack
This is a UWB module for M5Stack. UWB stands for Ultra Wideband and is a communication technique that can be used for locating devices. With this module it is possible to determine the distance to another UWB module. For the time being, the module ca..
€60.00
Ex Tax:€49.59
Model: M5STACK-U087
Brand: M5Stack
This is an isolated voltage sensor module with a Grove connection for M5Stack. The module contains a 16-bit ADC (analog to digital) converter, the ADS1115. The sensor is factory calibrated with the calibration data stored in the built-in EEPROM. The ..
€20.00
Ex Tax:€16.53
Model: M5STACK-U101
Brand: M5Stack
The Watering Unit from M5Stack is a capacitive soil moisture sensor module. In addition, this unit also contains a water pump that can be connected to a water source with the supplied hose. For example, with this module you can easily react to l..
€15.00
Ex Tax:€12.40
Model: M5STACK-U030
Brand: M5Stack
This is a module with a built-in HX711 load cell amplifier with a Grove connection for the M5Stack.
Specifications:
HX711 load cell amplifier
Nomimal power consumption: 1.6mA
Power consumption during sleep mode: <1uA
2x LEGO® ..
€5.50
Ex Tax:€4.55
Model: M5STACK-U180
Brand: M5Stack
A load cell amplifier module from M5Stack. The module contains a separate microcontroller that reads out the load cell amplifier chip. This microcontroller can then be read out via I2C...
€6.50
Ex Tax:€5.37
Model: MV-NA6-0.3KG
With this load cell weight can be measured.
Specifications:
Weight range: 0-0.3kg
Recommended input voltage: 5-12V
Dimensions: See images
Pinout wires:
Red: + Power
White: - Signal
Black: - Power
Green: + Signal
Transp..
€11.50
Ex Tax:€9.50
Model: MV-NA2-100KG
With this load cell mass can be measured.
Pinout wires:
Red: + Excitation
White: - Signal
Black: - Excitation
Green: + Signal
Note: The signals from this load cell can not be read with an Arduino. This requires an additional signa..
€17.25
Ex Tax:€14.26
Model: MV-NA26-10KG
With this load cell weight can be measured.
Specifications:
Weight range: 0-10kg
Recommended input voltage: 5-12V
Dimensions: See images
Pinout wires:
Red: + Power
White: - Signal
Black: - Power
Green: + Signal
Note..
€8.00
Ex Tax:€6.61
2-4 Weeks
Model: MV-NA27-1KG
With this load cell weight can be measured.
Specifications:
Weight range: 0-1kg
Recommended input voltage: 5-12V
Dimensions: See images
Pinout wires:
Red: + Power
White: - Signal
Black: - Power
Green: + Signal
Note:..
€7.00
Ex Tax:€5.79
Model: MV-NA2-200KG
With this load cell mass can be measured.
Pinout wires:
Red: + Excitation
White: - Signal
Black: - Excitation
Green: + Signal
Note: The signals from this load cell can not be read with an Arduino. This requires an additional ..
€19.50
Ex Tax:€16.12
Model: MV-NA26-20KG
With this load cell weight can be measured.
Specifications:
Weight range: 0-20kg
Recommended input voltage: 5-12V
Dimensions: See images
Pinout wires:
Red: + Power
White: - Signal
Black: - Power
Green: + Signal
Note..
€8.00
Ex Tax:€6.61
Model: MV-NA27-2KG
With this load cell weight can be measured.
Specifications:
Weight range: 0-2kg
Recommended input voltage: 5-12V
Dimensions: See images
Pinout wires:
Red: + Power
White: - Signal
Black: - Power
Green: + Signal
Note:..
€6.00
Ex Tax:€4.96
Model: MV-NA26-30KG
With this load cell weight can be measured.
Specifications:
Weight range: 0-30kg
Recommended input voltage: 5-12V
Dimensions: See images
Pinout wires:
Red: + Power
White: - Signal
Black: - Power
Green: + Signal
Note..
€8.00
Ex Tax:€6.61
Model: MV-NA27-5KG
With this load cell mass can be measured.
Specifications:
Range weight: 0-5kg
Recommended input voltage: 5-12V
Dimensions: See images
Pinout wires:
Red: + Power
White: - Signal
Black: - Power
Green: + Signal
Note: T..
€6.00
Ex Tax:€4.96
Model: MV-DNA1-20KG
This load cell can be used to measure weight. This version has a built-in load cell amplifier and can be read out digitally via RS485...
€32.00
Ex Tax:€26.45
Model: MV-DNA1-50KG
This load cell can be used to measure weight. This version has a built-in load cell amplifier and can be read out digitally via RS485...
€32.00
Ex Tax:€26.45
Model: MV-DNA1-5KG
This load cell can be used to measure weight. This version has a built-in load cell amplifier and can be read out digitally via RS485...
€32.00
Ex Tax:€26.45
Model: MV-DNA2-200KG
This load cell can be used to measure weight. This version has a built-in load cell amplifier and can be read out digitally via RS485...
€37.25
Ex Tax:€30.79
Model: MV-NS1-100KG
With this load cell mass can be measured. The S shape makes it well suited for crane scales, for example.
Pinout wires:
Red: + Excitation
White: - Signal
Black: - Excitation
Green: + Signal
Transparent: Shielding
Note: The signa..
€35.50
Ex Tax:€29.34
Model: MV-NS7-10KG
With this load cell mass can be measured. The S shape makes it well suited for crane scales, for example.
Pinout wires:
Red: + Excitation
White: - Signal
Black: - Excitation
Green: + Signal
Transparent: Shielding
Note: The signa..
€35.50
Ex Tax:€29.34
Model: MV-NS1-200KG
With this load cell mass can be measured. The S shape makes it well suited for crane scales, for example.
Pinout wires:
Red: + Excitation
White: - Signal
Black: - Excitation
Green: + Signal
Transparent: Shielding
Note: The signa..
€38.00
Ex Tax:€31.41
Model: MV-NS7-20KG
With this load cell mass can be measured. The S shape makes it well suited for crane scales, for example.
Pinout wires:
Red: + Excitation
White: - Signal
Black: - Excitation
Green: + Signal
Transparent: Shielding
Note: The signa..
€35.50
Ex Tax:€29.34
Model: MV-NS1-50KG
With this load cell mass can be measured. The S shape makes it well suited for crane scales, for example.
Pinout wires:
Red: + Excitation
White: - Signal
Black: - Excitation
Green: + Signal
Transparent: Shielding
Note: The signa..
€37.75
Ex Tax:€31.20
Model: MAX4466MICMOD
With this module you can easily measure the ambient sound with an analog pin on your Arduino.
The module amplifies the signal from the built-in microphone.
With the board even small sounds can easily be measured with an Arduino.
Specifications:
..
€2.50
Ex Tax:€2.07