Model: WMD1MPIRSHIELD
A shield with a PIR sensor for the (Wemos) D1 Mini.
Specifications:
Pin adjustable (standard on D3)
Can be mounted with 2mm mounting holes
Can also be used in combination with 4-pin cable
Pin headers are included with this shield (a..
€4.00
Ex Tax:€3.31
Model: WMD1MSGP30SHIELD
A TVOC and eCO2 sensor module/shield for the Wemos D1 Mini. The module communicates via I2C.
Specifications:
TVOC range: 0-60000ppb
eCO2 range: 400-60000ppm
Communication: I2C
I2C address: 0x3C
One 2mm mounting hole
For mor..
€11.00
Ex Tax:€9.09
Model: WMD1MSHT30SHIELD
A shield with an SHT30 temperature and humidity sensor for the (Wemos) D1 Mini.
The shield works with I2C where the I2C address is adjustable (see PCB)
Pin headers are included with this shield (as shown)
For more information, see this page: S..
€5.00
Ex Tax:€4.13
Model: MH-Z14A
This CO2 sensor can very accurately measure the amount of carbon dioxide with the non-dispersive infrared principle (NDIR).
This sensor is supplied with a compatible cable and can also be soldered with pin headers (not included). We also sell a cabl..
€27.75
Ex Tax:€22.93
Model: MH-Z19C
The MH-Z19C is the successor to the popular MH-Z19B and is largely compatible. This version is more stable, and in practice more accurate than the MH-Z19B. This CO2 sensor can measure the amount of carbon dioxide very accurately with the non-dispersi..
€17.50
Ex Tax:€14.46
Model: MH-Z19C-P3.5
The MH-Z19C can measure the amount of carbon dioxide in the air very accurately with the non-dispersive infrared principle (NDIR). The module works with PWM or UART protocol.
Note: The pins are not long enough to connect DuPont cables to female pi..
€21.00
Ex Tax:€17.36
Model: YDLIDAR-GS2
A LiDAR sensor module from YDLIDAR. This sensor uses a laser to measure distance and position of objects (as small as 3mm) in a FOV of 100 degrees between 25-300mm. The sensor can be used via UART, or via USB with the supplied USB to serial adapter b..
€37.25
Ex Tax:€30.79
Model: YDLIDAR-GS5
A LiDAR sensor module from YDLIDAR. This sensor uses a laser to measure distance and position of objects in a FOV of 85 degrees between 70-1000mm. The sensor can be used via UART, or via USB with the supplied USB to serial adapter board.
Via the l..
€50.25
Ex Tax:€41.53
On request
Model: YDLIDAR-SDM15
A LiDAR sensor module from YDLIDAR. This sensor uses a laser to measure distance up to 15 meters. The sensor can be used via UART, or via USB with the supplied USB to serial adapter board...
€29.00
Ex Tax:€23.97
Model: YDLIDAR-T-MINI-PLUS
A small LiDAR sensor module from YDLIDAR. This sensor uses a laser to measure distance and 360°. The rotating part is completely enclosed in a plastic housing, making this sensor a lot less vulnerable than comparable LiDAR sensors. The sensor can be ..
€68.50
Ex Tax:€56.61
Model: YDLIDAR-X4PRO
A LiDAR sensor module from YDLIDAR. This sensor uses a laser to measure distance up to 10 meters and 360°. The sensor can be read via USB with the supplied USB to serial adapter board, or separately via UART. A connection cable with loose wires is in..
€68.75
Ex Tax:€56.82
Model: YF-S201C
With this sensor you can easily measure the flow of liquids (water).
The sensor has a standard 1/2" coupling (21mm) on both sides and is therefore easy to connect to, for example, a Gardena garden system (see images)(Gardena coupling not included)..
€4.00
Ex Tax:€3.31
Model: YF-2103-1.2-180DEG
With this sensor you can easily measure the flow of liquids (water). The water connections are suitable for a 6mm hose: Hose 6mm
Pinout:
Red: Vcc/plus (supply voltage)
Black: GND/min
Yellow: Signal
See the following page for a tutor..
€4.00
Ex Tax:€3.31
Model: YF-2103-3.5-0DEG
With this sensor you can easily measure the flow of liquids (water). The water connections are suitable for a 6mm hose: Hose 6mm
Pinout:
Red: Vcc/plus (supply voltage)
Black: GND/min
Yellow: Signal
See the following page for a ..
€4.00
Ex Tax:€3.31
Model: YF-B1
With this sensor you can easily measure the flow of liquids (water).
The output of the sensor gives 11 pulses per second with a duty cycle of approximately 50% for every liter of liquid that passes through it per minute: Q [L/min] = fpulse[Hz ]/11..
€6.00
Ex Tax:€4.96
Model: YF-B6
With this sensor you can easily measure the flow of liquids (water).
The output of the sensor gives 6.6 pulses per second with a duty cycle of approximately 50% for every liter of liquid that passes through it per minute: Q [L/min] = fpulse[Hz ]/6..
€6.75
Ex Tax:€5.58
Model: YF-B6TEMP
With these sensors you can easily measure the flow and temperature of liquids (water).
The output of the sensor gives 6.6 pulses per second with a duty cycle of approximately 50% for every liter of liquid that passes through it per minute: Q [L/mi..
€8.50
Ex Tax:€7.02
Model: YF-B7
With these sensors you can easily measure the flow and temperature of liquids (water).
The output of the sensor gives 11 pulses per second with a duty cycle of approximately 50% for every liter of liquid that passes through it per minute: Q [L/min..
€7.00
Ex Tax:€5.79
Model: YF-C01
With this sensor you can easily detect the flow of liquids (water).
*Note: The product states that a maximum of 220V can be switched, but we do not recommend this for safety reasons...
€7.00
Ex Tax:€5.79
Model: YF-C02
This switch switches when water flows through it.
Specifications:
Maximum switching voltage: 30V*
Maximum switching current: 500mA
Maximum contact resistance: 1Ω
Contact: Normally open (NO)
Minimum flow rate (to close circuit): ~1.5L..
€8.00
Ex Tax:€6.61
2-4 Weeks
Model: YF-S401
With this sensor you can easily measure the flow of liquids (water).
The sensor has a 7mm coupling on both sides and is therefore easy to connect to a 6mm hose.
The output of the sensor gives 98 pulses per second with a duty cycle of appro..
€4.50
Ex Tax:€3.72
With this sensor you can easily measure the flow of liquids (water).
Pinout:
Red: Vcc/plus (supply voltage)
Black: GND/min
Yellow: Signal
See the following page for a tutorial with a similar sensor: How to Use Water Flow Sensor - Ar..
€10.25
Ex Tax:€8.47