Model: MAX6675KIT
The MAX6675 module can be used in combination with a thermocouple to read very high temperatures digitally via SPI.
Specifications:
Voltage range: 3 - 5.5V DC
Power consumption: ~50mA
Temperature range(included K-type thermocouple): 0 - ..
€7.00
Ex Tax:€5.79
Model: MAX9814MICMOD
With this module you can easily measure sound with an analog pin on your Arduino or other microcontroller. The module has an automatic gain/amplification (ACG) of the microphone: The module amplifies sounds with a low volume more, and sounds with a h..
€3.75
Ex Tax:€3.10
Model: DS18B20
A small but accurate temperature sensor in a TO-92 package...
€1.75
Ex Tax:€1.45
Model: MCP3008
The MCP3008 chip has an 8-channel ADC with 10-bit resolution. With the SPI interface, a sample rate of 200ksps is possible. This could for example be used to add analog inputs to your Raspberry Pi.
Specifications:
Supply voltage: 2.7-5.5V DC..
€4.50
Ex Tax:€3.72
Model: MCP9808MOD
This sensor is based on the MCP9808 chip can very accurately measure the temperature and works on I2C.
Specifications:
Voltage: 2.7 - 5.5V DC
Current: ~200uA(operational), ~0.1uA(shutdown mode)
Works on I2C
Selectable accuracy
S..
€6.50
Ex Tax:€5.37
Model: MF-MTP40-F
This CO2 sensor can very accurately measure the amount of carbon dioxide with the non-dispersive infrared principle (NDIR).
See the following page for an Arduino library for this sensor: MTP40F
Note: Soldering headers may affect calibration...
€17.25
Ex Tax:€14.26
On request
Model: MH-ET-LIVE-SCANNER
A simple barcode and QR code scanner. Has a UART interface and an HID interface. The board has a built-in LED for scanning in the dark.
Specifications:
Micro USB UART interface
Default baudrate: 9600
Micro USB HID (Human Interface Device..
€19.50
Ex Tax:€16.12
Model: RCWL-0516
This sensor serves as a replacement for a PIR sensor and works with microwaves and the Doppler effect.
Due to the difference in speed, this sensor can detect movement.
Specifications:
Input voltage: 3.3-18V
Input current: 2.8mA (typical);..
€1.80
Ex Tax:€1.49
Model: MLX90393MOD
A magneto sensor module with variable gain, which allows it to be used, for example, as a compass and a field strength sensor...
€11.25
Ex Tax:€9.30
Model: MPR121
The MPR121 touch module can read up to 12 channels of touch. 8 channels can also be used to control LEDs.
The module works via I2C and operates at a voltage between 2.5 and 3.6VDC.
Do you want to get started with this module? Look here: Sensing ..
€4.00
Ex Tax:€3.31
Model: MPU6050
The MPU-6050 sensor contains a 3-axis MEMS accelerometer and a 3-axis MEMS gyroscope in one chip. It is very precise thanks to the 16-bit analog to digital convertion hardware for each channel...
€8.75
Ex Tax:€7.23
Model: MPU6500
The MPU-6500 sensor contains a 3-axis MEMS accelerometer, 3-axis MEMS gyroscope on a single chip (6DOF).
Specifications:
Chip: MPU-6500
Power supply: 3.3-5VDC
Signal voltage: 3.3V
Gyroscope range: ±250, ±500, ±1000, ±2000 °/s (16 bits)..
€6.75
Ex Tax:€5.58
Model: MQ135
This sensor detects a number of gases so that air quality in general can be measured. The sensor has both an analog and a digital output. The digital output gives a high signal when the gas concentration exceeds a certain threshold value. This thresh..
€4.00
Ex Tax:€3.31
Model: MQ2
This sensor detects the presence of LPG, i-butane, propane, methane ,alcohol, hydrogen and smoke. You can adjust the threshold of the sensor with a potentiometer.
Pinout:
5V (5V voltage)
GND (min/ground)
A0 (Analog output of the sensor)
..
€3.50
Ex Tax:€2.89
Model: MQ3
This sensor detects the presence of alcohol (ethanol).
Connections:
5V (5V voltage)
GND (earth/min/ground)
A0 (Analog output of the sensor)
D0 (Digital output of the sensor)
With the potentiometer you can set the threshold value o..
€3.50
Ex Tax:€2.89
Model: MQ4
This sensor detects the presence of methane and natural gas.
Connections:
5V (5V voltage)
GND (earth/min/ground)
A0 (Analog output of the sensor)
D0 (Digital output of the sensor)
With the potentiometer you can set the threshold v..
€3.50
Ex Tax:€2.89
Model: MQ5
This sensor detects the presence of LPG and natural gas.
Connections:
5V (5V voltage)
GND (Earth/min/ground)
A0 (Analog output of the sensor)
D0 (Digital output of the sensor)
With the potentiometer you can set the threshold value..
€3.50
Ex Tax:€2.89
Model: MQ6
This sensor detects the presence of LPG, butane and propane.
Connections:
5V (5V voltage)
GND (Earth/min/ground)
A0 (Analog output of the sensor)
D0 (Digital output of the sensor)
With the potentiometer you can set the threshold v..
€3.50
Ex Tax:€2.89
Model: MQ7
This sensor detects the presence of carbon monoxide.
Connections:
5V (5V voltage)
GND (Earth/min/ground)
A0 (Analog output of the sensor)
D0 (Digital output of the sensor)
With the potentiometer you can set the threshold value of ..
€3.50
Ex Tax:€2.89
Model: MQ8
This sensor detects the presence of hydrogen gas.
Connections:
5V (5V voltage)
GND (Earth/min/ground)
A0 (Analog output of the sensor)
D0 (Digital output of the sensor)
With the potentiometer you can set the threshold value of the..
€3.50
Ex Tax:€2.89
Model: MQ9
This sensor detects the presence of carbon monoxide, methane and LPG.
Connections:
5V (5V voltage)
GND (Earth/min/ground)
A0 (Analog output of the sensor)
D0 (Digital output of the sensor)
With the potentiometer you can set the th..
€4.00
Ex Tax:€3.31
Model: MT8870MOD
This DMTF module, based on the MT8870 chip, can decode telephone tones. These are the tones you hear when entering a phone number.
On the 3.5mm connection you can eg connect your mobile phone that can transfer these tones to the DMTF module.
This a..
€3.50
Ex Tax:€2.89
Model: MW-FS-2.0
With this sensor you can easily measure the flow of liquids (water). The water connections are suitable for a 6mm hose: Hose 6mm
Pinout:
Red: Vcc/plus (supply voltage)
Black: GND/min
Yellow: Signal
See the following page for a ..
€4.00
Ex Tax:€3.31
Model: GY-906BAA
This non-contact IR temperature sensor can be used to measure temperature of an object from a distance.
See the following page for an Arduino IDE library: MLX90614..
€8.50
Ex Tax:€7.02
Model: GY-906DCC
This non-contact IR temperature sensor can be used to measure temperature of an object from a distance. This variant is extra accurate around 38°C, making it well suited for measuring body temperature.
See the following page for an Arduino IDE lib..
€10.25
Ex Tax:€8.47
Model: GY-906DCI
This non-contact IR temperature sensor can be used to measure temperature of an object from a distance. This variant is extra accurate around 38°C, making it well suited for measuring body temperature.
See the following page for an Arduino IDE lib..
€23.00
Ex Tax:€19.01
Model: SDS011
This optical dust sensor can measure the air quality very accurately by measuring air particles or dust based on laser detection. This sensor is supplied with the accompanying cable and USB to serial converter to connect the sensor to a computer if n..
€24.00
Ex Tax:€19.83
Model: SDS198
This optical dust sensor can measure air quality very accurately by measuring air particles/dust based on laser detection. This sensor comes with accompanying cable and USB to serial converter to connect the sensor to a computer if necessary. We also..
€60.00
Ex Tax:€49.59
Model: NTC100KCABLE
A default NTC of 100K(1% accuracy) sealed in glas and connected with a 100cm cable. This NTC is suited to operate for 3D printers.
The end of the cables are loose cables to connect the NTC to the desired controller.
Specifications:
Resistor..
€1.50
Ex Tax:€1.24
2-4 Weeks
Model: NTC10KCABLE
A standard NTC of 10K incorporated in a stainless steel housing and extended with a cable of approximately 100 cm...
€2.00
Ex Tax:€1.65
Model: NTCTEMPMOD
Detect change of temperature with this adjustable module.
Works on 3.3V to 5V. The output D0 is high when the set temperature rises above the threshold value, and low when it drops below the threshold value...
€2.00
Ex Tax:€1.65
Model: NTC100KCARTRIDGE
This is a temperature thermistor cartridge for 3D printer hotends. This sensor is compatible with some E3D/clone E3D hotend blocks.
Check whether your hotend block is compatible with this cartridge. You cannot use this cartridge with a hot end block..
€3.00
Ex Tax:€2.48
Model: IROBJECTSENSMOD
Detects the proximity of an object by means of infrared light. The sensitivity can be adjusted with the potentiometer on the module.
Works on 3.3V to 5V. The output D0 is low if the reflection value of the infrared light falls below the threshold ..
€2.00
Ex Tax:€1.65
Model: OH49E
This hall sensor is the compatible version of the SS49E hall sensor from Honeywell.
The output of this sensor is analog/variable and based on the magnetic field strength.
For more information see the datasheet under the tab "Downloads"...
€0.35
Ex Tax:€0.29
Model: OL-BB-ADS1220
An ADC module that can measure voltage with high resolution. In addition, the module also has a built-in temperature sensor and a built-in signal amplifier to be able to measure small voltages...
€18.75
Ex Tax:€15.50
Model: OL-PIEZZO-KNOCK
This electronic shock sensor from Olimex uses a Piezo element to measure vibrations/shocks. A Piezo element generates electricity when subjected to mechanical stress (vibrations) which means that there is no need to provide a power supply to the sens..
€2.00
Ex Tax:€1.65
Model: OS-ACS712MOD20A
A simple current sensor from Open-Smart that can measure both DC and AC current.
Specifications:
Supply voltage: 4.5 - 5.5V DC
Signal voltage: 0.5 - 4.5V
Current sensor:
Measuring range: -20 - 20A
Accuracy: ±2%
Measuring meth..
€4.50
Ex Tax:€3.72
Model: OS-ACS712MOD30A
A simple current sensor from Open-Smart that can measure both DC and AC current.
Specifications:
Supply voltage: 4.5 - 5.5V DC
Signal voltage: 0.5 - 4.5V
Current sensor:
Measuring range: -30 - 30A
Accuracy: ±2%
Measuring meth..
€4.50
Ex Tax:€3.72
Model: OS-ACS712MOD5A
A simple current sensor from Open-Smart that can measure both DC and AC current.
Specifications:
Supply voltage: 4.5 - 5.5V DC
Signal voltage: 1.5 - 3.5V
Current sensor:
Measuring range: -5 - 5A
Accuracy: ±2%
Measuring method..
€3.75
Ex Tax:€3.10
Model: OS-DS1307RTC
This RTC (Real Time Clock) module makes it very easy to keep track of time...
€2.50
Ex Tax:€2.07
Model: OS-DS3231RTC
This RTC (Real Time Clock) module makes it very easy to keep track of time.
Note: As soon as the module is supplied with voltage, the chip activates and thus also the battery backup. From then on, the battery will last approximately one year (net,..
€4.00
Ex Tax:€3.31
Model: CNY70
A combination of an infrared LED and a phototransistor.
You can use this for the detection of objects at a very short distance.
This product does not come from Vishay, but is a compatible version. So you can use the datasheet of Vishay(largely)..
€0.50
Ex Tax:€0.41
Model: TCRT5000
A combination of an infra-red LED and a phototransistor.
You can use this for the detection of objects at short range.
See the datasheet under the tab "Downloads" for more information (this sensor is not officially from Vishay, but it is compat..
€0.35
Ex Tax:€0.29
Model: OP-OV13850CAM
A camera module from Orange Pi, suitable for Orange Pi boards based on the RK3588/RK3588S chip such as:
Orange Pi 5
Orange Pi 5B
Orange Pi 5 Plus
Orange Pi 5 Pro..
€20.00
Ex Tax:€16.53
Model: OP2MPCAM
Brand: Orange Pi
A 2MP camera with a wide-angle lens. This camera is only suitable for the Orange Pi Plus or Orange Pi Plus2 (see images for example)..
€8.00
Ex Tax:€6.61
Model: OP2MPCAMSTD
Brand: Orange Pi
A 2MP camera with a wide-angle lens. This camera is suitable for various Orange Pi's with a standard CSI camera connector...
€9.75
Ex Tax:€8.06
Model: OV7670
A widely used camera module for Arduino.
Specifications:
Resolution: 640X480 pixels
IO Voltage: 2.5V to 3.0V
Power consumption: 60mW/15fpsVGAYUV
Sleep mode: <20μA
Temperature range (minimum and maximum): -30°C to 70°C
Stable tem..
€6.00
Ex Tax:€4.96
Model: OV7670AL422
A widely used camera module for Arduino. This version has a built-in AL422 FIFO which makes the readout less time-critical.
You can use this library in combination with an Arduino Uno or Mega: Github dalmirdasilva/ArduinoCamera.
Specifications:
..
€11.50
Ex Tax:€9.50
Model: PCF8591
This module has 4 analog to digital (A/D) converters, 1 digital to analog (D/A) converter and 3 built-in sensors: A light sensor, a temperature sensor and a potentiometer. The sensors are connected via the included 2P jumpers, if a built-in sensor is..
€3.50
Ex Tax:€2.89