Model: SEEED-101020593
The Coulomb Counter is a handy sensor for monitoring battery capacity.
Note: The sensor cannot measure current or voltage...
€12.00
Ex Tax:€9.92
New
A Time of Flight distance sensor module from Seeed Studio with grove connector. ..
€9.50
Ex Tax:€7.85
Model: SEEED-101020058
An EMG detector from Seeed Studio for measuring activity in the muscles of the human body. The EMG detector measures small signals coming from the muscles, that signal is then amplified and filtered. The output signal can be read on the Vout pin. Wit..
€30.75
Ex Tax:€25.41
Model: SEEED-101020045
A Grove MQ-9 gas sensor from Seeed Studio. This sensor communicates by outputting an analog signal to the SIG pin. The sensitivity/signal output voltage of the gas sensor can be adjusted with the built-in potentiometer. This sensor cannot measure an ..
€11.00
Ex Tax:€9.09
Model: SEEED-101020820
A Grove module from Seeed Studio with 4 different gas sensors. The module has a microcontroller that reads the 4 sensors. This microcontroller then communicates this data with an external microcontroller via I2C. The sensors cannot measure an exact c..
€35.50
Ex Tax:€29.34
2-4 Weeks
Model: SEEED-101020020
A PIR motion sensor from Seeed Studio. This type of sensor can be used to detect movement by means of infrared light.
Specifications:
Supply voltage: 3 - 5V DC
Signal voltage: 3 - 5V (same as supply voltage)
Motion sensor:
Sensor(c..
€9.75
Ex Tax:€8.06
Model: SEEED-101020023
A simple sound sensor from Seeed Studio with an omnidirectional electret condenser microphone and a built-in amplifier. This module can be used to detect sounds in the environment.
Specifications:
Supply voltage: 4V~12V DC
Signal volt..
€7.00
Ex Tax:€5.79
Model: SEEED-114992867
This SenseCAP air temperature and humidity sensor from Seeed Studio has a wide measuring range, and can be used at a long distance with LoRaWAN. Due to the dust-proof and splash-proof housing, this sensor can also be used outdoors. The sensor is easy..
€78.00
Ex Tax:€64.46
On request
Model: SEEED-114992868
This SenseCAP light intensity sensor from Seeed Studio has a wide measuring range and can be used at a great distance with LoRaWAN. Due to the dust-proof and splash-proof housing, this sensor can also be used outdoors. The sensor is easy to configure..
€71.00
Ex Tax:€58.68
On request
Model: SEEED-114992869
This SenseCAP sensor from Seeed Studio can measure CO2, temperature and humidity. In addition, it can be used wirelessly at a great distance with LoRaWAN. Due to the dust-proof and splash-proof housing, this sensor can also be used outdoors. The sens..
€149.25
Ex Tax:€123.35
On request
Model: SEEED-114992871
This SenseCAP sensor from Seeed Studio can measure the humidity, temperature and electrical conductivity (EC) of soil. In addition, it can be used wirelessly at a great distance with LoRaWAN. Due to the dust-proof and splash-proof housing, this senso..
€185.00
Ex Tax:€152.89
Model: SA-004-0-0053
This CO2 sensor can measure the amount of carbon dioxide very accurately with the non-dispersive infrared principle (NDIR).
Specifications:
Supply voltage: 4.5 - 5.25V DC
Signal voltage: 3.3V (not 5V compatible)
Power consumption: <18..
€35.75
Ex Tax:€29.55
Model: SA-004-1-0101
This CO2 sensor can measure the amount of carbon dioxide very accurately with the non-dispersive infrared principle (NDIR).
Note: The sensor must be soldered, see the manual under the tab "Downloads" to prevent damage to the sensor. If you have no..
€21.50
Ex Tax:€17.77
Model: SEN55-SDN-T
Sensirion SEN55-SDN-T Environmental Sensor - Particulate Matter - Humidity - Temperature - VOC - NOx
An environmental sensor from Sensirion that can measure temperature, particulate matter concentrations, humidity, VOC and NOx. The VOC (Volatile Organic Compound) and NOx gas concentrations are measured relatively, using a VOC Index and NOx Index. Th..
€32.25
Ex Tax:€26.65
Model: SEN66-SIN-T
An environmental sensor from Sensirion that can measure temperature, particulate matter concentrations, humidity, CO2, VOC and NOx. The VOC (Volatile Organic Compound) and NOx gas concentrations are measured relatively, using a VOC Index and NOx Inde..
€56.50
Ex Tax:€46.69
Model: SPS30
A particulate matter sensor that can measure both the mass concentration of particles and the number of particles per unit volume.
Note: No cable is included, this can be ordered separately: JST-ZHR 5p to DuPont Female Compatible Cable..
€38.50
Ex Tax:€31.82
Model: SGP30MOD
A sensor module that can measure TVOC and eCO2. The module communicates via I2C.
Specifications:
Supply voltage: 1.8-5V DC
Current: ~40mA
Signal voltage: 1.8-5V
Measuring range:
TVOC: 0-60000ppb
eCO2: 400-60000ppm
Samp..
€9.75
Ex Tax:€8.06
Model: GP2Y0A02YK0F
With this sensor you can measure the distance by means of infrared light reflection.
Specifications:
Range: 20-150 cm
Input voltage: 4.5 - 5.5 V
Input current: 33 mA (average)
For more information see the datasheet under the tab "Do..
€6.50
Ex Tax:€5.37
Model: GP2Y0A21YK0F
With this sensor you can measure the distance by means of infrared light reflection.
Specifications:
Range: 10-80 cm
Input voltage: 4.5 - 5.5 V
Input current: 30 mA (average)
For more information see the datasheet under the tab "Dow..
€5.50
Ex Tax:€4.55
Model: GP2Y0A41SK0F
With this sensor you can measure the distance by means of infrared light reflection.
Specifications:
Range: 4-30 cm
Input voltage: 4.5 - 5.5 V
Input current: 12 mA (average)
For more information see the datasheet under the tab "Down..
€7.00
Ex Tax:€5.79
Model: GP2Y1010AU0F
This optical sensor from Sharp can measure the air quality by measuring air particles/dust.
More information about the sensor can be found in the datasheet under the tab "Downloads".
With this dust sensor, the required cable, LED series resistor ..
€8.00
Ex Tax:€6.61
Model: PPD42NJ
This optical dust sensor can measure the air quality by measuring on air particles/dust.
This sensor is supplied with the corresponding cable.
Pinout of the connector:
Pin
Description
1
GND
2
Out..
€9.75
Ex Tax:€8.06
Model: SI7021MOD2
A compact temperature and humidity sensor combined. Several applications are possible, such as for a weather station or climate control. In addition, the sensor has a built-in heater element to test the sensor or to evaporate condensation.
Specifi..
€9.75
Ex Tax:€8.06
Model: BODEMVOCHT
The module can be ajusted so that it gives a high signal at a certain level of humidity. Besides that, this module also has an analog pin to measure a variable output. You can mesaure the humidity by sticking the two points into the soil.
Specific..
€3.00
Ex Tax:€2.48
Model: SOILCABLE1.2M
The module can be adjusted so that it gives a high signal at a certain moisture level . Besides that, this module also has an analog pin to measure a variable output.
Specifications:
Voltage: 3.3 - 12V DC
Current (in use): <20mA
..
€7.00
Ex Tax:€5.79
Model: YTF-01
A standard solenoid valve with water flow sensor. With this, for example, the water flow in a hose or pipe can be measured and regulated.
The output of the sensor gives 9.4 pulses per second with a duty cycle of approximately 50% for every liter o..
€10.25
Ex Tax:€8.47
Model: SONOFF-SNZB-02DR2
The Sonoff SNZB-02DR2 is a very handy temperature and humidity sensor that works with the wireless Zigbee protocol. With this sensor module, you can easily transmit the temperature and humidity to other devices to turn on an air conditioner/fan, for ..
€21.50
Ex Tax:€17.77
Model: SONOFF-MS01
Note: This link is for the soil moisture sensor for the TH Elite/Origin. This product has a different connector, otherwise it is identical...
€13.50
Ex Tax:€11.16
Model: SONOFFPIR2
The motion sensor is compatible with the Sonoff PIR2 and detects human movements and then sends a 433MHz RF signal. This signal can then be captured with the Sonoff 433MHz RF-Wi-Fi Bridge R2. This way you can, for example, automatically turn on light..
€9.50
Ex Tax:€7.85
Model: SONOFF-SNZB-02D
The Sonoff SNZB-02D is a very handy temperature and humidity sensor that works with the wireless Zigbee protocol. With this sensor module, you can easily transmit the temperature and humidity to other devices to turn on an air conditioner/fan, for ex..
€13.25
Ex Tax:€10.95
Model: SONOFF-SNZB-02LD
The Sonoff SNZB-02LD is a very handy temperature sensor and works with the Zigbee wireless protocol. With this sensor module, the temperature can easily be transmitted to other devices to, for example, turn on an air conditioner. This sensor also has..
€20.00
Ex Tax:€16.53
Model: SONOFF-SNZB-02WD
The Sonoff SNZB-02WD is a very handy temperature and humidity sensor and works with the Zigbee wireless protocol. With this sensor module, the temperature and humidity can easily be transmitted to other devices to, for example, turn on an air conditi..
€17.75
Ex Tax:€14.67
Model: SONOFF-SNZB-03P
The SNZB-03P motion sensor from Sonoff is the improved version of the SNZB-03. With this device, a signal can easily be transmitted to other devices when motion is detected to turn on a lamp, for example. It can be controlled using Android or iO..
€11.50
Ex Tax:€9.50
Model: SONOFF-THS01
This temperature and humidity sensor from Sonoff is made to be used together with the Sonoff TH Elite or TH Origin...
€8.50
Ex Tax:€7.02
Model: SONOFF-WTS01
This temperature sensor from Sonoff is made to be used together with the Sonoff TH Elite or TH Origin...
€7.00
Ex Tax:€5.79
Model: SOUNDDETECT
Detect sound! Set the potentiometer to a desired amount of sound at which a signal is generated.
The sensor works between the 3.3V and 5V. The signal is generated on the "OUT" pin...
€3.00
Ex Tax:€2.48
Model: SPA06
A very compact barometer that works via I2C or SPI.
Note: It says BME/BMP280 on the PCB, but the supplied module has a SPA06-003...
€3.75
Ex Tax:€3.10
Model: SRP-NTCC-10K
A standard NTC of 10KΩ (5% accurate).
For more information see the datasheet under the tab "Downloads"...
€0.40
Ex Tax:€0.33
Model: MAT060-B100K-331-A01
This sensor has a plane that can be used as "slide potentiometer". The resistance depends on where you press on the plane. With a simple voltage divider you can easily read the sensor on an analog input pin on your Arduino...
€2.50
Ex Tax:€2.07
Model: MF01-N-221-A04
This sensor is capable of measuring pressure by means of the membranes processed in the sensor.
The resistance of the sensor changes based on the pressure on the membrane.
With a simple voltage divider you can easily read the sensor on an an..
€2.50
Ex Tax:€2.07
Model: TCRT5000MOD
Detect the proximity of an object by means of infrared light. The sensitivity can be adjusted with the potentiometer on the module.
Works with 3.3V to 5V. The output D0 is low if the reflection value of the infrared light falls below the threshold..
€2.00
Ex Tax:€1.65
Model: TCS3200DMOD
With this sensor you can detect the color of an object. There are four LEDs on the module as a light source.
In the middle is the TCS3200D color sensor (upgraded version of the TCS230 sensor).
Specifications:
Voltage: 2.7 - 5.5V DC
Power ..
€5.25
Ex Tax:€4.34
Model: TCS34725MOD-RECT
This sensor module can detect the color of an object. The module has two LEDs as a light source with the color sensor in the middle. Because of the built-in level converter, the sensor can be used with both 3.3V and 5V microcontrollers.
Note: The ..
€4.50
Ex Tax:€3.72
On request
Model: TEENSYPROPSHIELD
With this shield for Teensy 3.2 and Teensy LC you expand the microcontroller with the following features:
Accelerometer (FXOS8700)
Gyroscope (FXAS21002)
Air pressure sensor and altimeter (MLP3115)
8MB Flash memory
Fast LED driver
2W A..
€20.50
Ex Tax:€16.94
Model: TEMT6000MOD
With the TEMT6000 light sensor module you can easily read out the amount of light in an analog way.
With this module, a 3-pin header is supplied to solder onto the module.
The module also has a 3mm hole for mounting.
See the datasheet for more i..
€3.00
Ex Tax:€2.48
Model: TOF10120
With this very small TOF10120 Time-of-Flight sensor you can easily measure a distance using the reflection of light.
Specifications:
Voltage (power supply and signal): 3.3-5V DC
Detection distance: 100-1800mm
Wavelength: 940nm
2 Mounti..
€6.00
Ex Tax:€4.96
Model: TMP36
A small, but accurate temperature sensor in the TO-92 package. This one can be read out in an analog way. Works with either 3.3V or 5V...
€3.50
Ex Tax:€2.89
Model: TOUCH1CHBLUE
A small touch square that glows blue when you press it with your finger and can transmit a signal (touch works capacitively).
This module remains on after contact and only turns off when it is touched (can therefore be used as on/off switch).
The m..
€3.00
Ex Tax:€2.48
Model: TOUCH1CHGREEN
A small touch surface that glows green when you press it and can transmit a signal (touch works capacitively).
This module stays on after contact and only goes out when it is touched (can therefore be used as on/off switch).
The module operates at ..
€3.00
Ex Tax:€2.48
Model: TOUCH1CHRED
A small touch area that glows red when you press it with your finger and can pass a signal (touch works capacitively)...
€3.00
Ex Tax:€2.48