Menu
Your Cart

Mechanics and Actuators - page 7

Model: SOLVALVENC12VNICKEL
A standard solenoid valve with which, for example, the water flow in a hose or pipe can be regulated. Specifications: Voltage: 12V DC Coil resistance: 25Ω ±10% (at 20°C) Connector: Disconnect cable lug 6.3mm Valve type: Normally closed..
€7.50
Ex Tax:€6.20
Solenoid Valve - Normally Closed - 12V DC - Nylon - 6mm
On request
Model: PYF2-XG-12V
A standard solenoid valve with which, for example, the water flow in a hose or pipe can be regulated. The coupling is suitable for a 6mm hose: Hose 6mm Note: The solenoid valve must be installed such that the coil is on top. Note: We cannot pro..
€6.50
Ex Tax:€5.37
Model: SOLVALVENC12VNYLON
A standard solenoid valve with which, for example, the water flow in a hose or pipe can be regulated. Specifications: Voltage: 12V DC Coil resistance: 25Ω ±10% (at 20°C) Connector: Disconnect cable lug 6.3mm Valve type: Normally closed..
€7.50
Ex Tax:€6.20
Model: SOLVALVENC24VNICKEL
A standard solenoid valve with which, for example, the water flow in a hose or pipe can be regulated. Specifications: Voltage: 24V DC Coil resistance: 105Ω ±10% (at 20°C) Connector: Disconnect cable lug 6.3mm Valve type: Normally close..
€7.00
Ex Tax:€5.79
Model: SOLVALVENC24VNYLON
A standard solenoid valve with which, for example, the water flow in a hose or pipe can be regulated. Specifications: Voltage: 24V DC Coil resistance: 105Ω ±10% (at 20°C) Connector: Disconnect cable lug 6.3mm Valve type: Normally close..
€6.50
Ex Tax:€5.37
Model: YTF-01
A standard solenoid valve with water flow sensor. With this, for example, the water flow in a hose or pipe can be measured and regulated. The output of the sensor gives 9.4 pulses per second with a duty cycle of approximately 50% for every liter o..
€10.25
Ex Tax:€8.47
Model: SONOFF-SWV-BSP
With this smart wireless water valve from Sonoff, a tap can be switched on and/or off remotely via the wireless Zigbee protocol. This allows you to schedule when your lawn is watered, for example. In addition, the flow rate can also be measured to ke..
€29.50
Ex Tax:€24.38
Model: WHEELCARKITDIY
An extra wheel for the car kit. Dimensions: 65mm (diameter), 27mm (width). The axle of the wheel is approximately 5mm in diameter with two flat sides so that the thickness of the axle at the smallest point is 4mm (see images for more clarity) ..
€2.00
Ex Tax:€1.65
Model: SPRING8X25
Stiff spring for 3D printers. The spring ensures that a heated bed does not have to be adjusted as often. Dimensions: 8 x 25 mm..
€1.00
Ex Tax:€0.83
Model: JK28HS45-0956-02AF
This small stepper motor is ideal for situations where space is limited. The stepper motor can be controlled as standard with 4 pins via the handy JST-XH connector, but also has 2 separate wires such that the motor can also be controlled unipolar. Th..
€14.50
Ex Tax:€11.98
Model: JK35HY34-1004A-04
A somewhat smaller 4 pin bipolar stepper motor suitable for various applications. The motor has a standard JST-PH compatible connector which makes it easy to connect. The corresponding cable is not included, but is sold separately...
€12.00
Ex Tax:€9.92
Model: JK42HS40-1704-83AF
A 4 pin bipolar stepper motor suitable for various applications. The stepper motor can be controlled with 4 pins via the handy JST-XH connector. The cable is attached to the stepper motor, so it cannot be detached...
€10.50
Ex Tax:€8.68
Model: JK42HS40-1704-13A
A 4 pin bipolar stepper motor suitable for various applications. The motor has a standard JST-PH compatible connector which makes it easy to connect. The corresponding cable is not included, but is sold separately...
€10.50
Ex Tax:€8.68
Model: JK17HS8401
A powerful bipolar stepper motor suitable for various applications including 3D printers. The motor has a standard JST-PH compatible connector which makes it easy to connect. The accompanying cable is not included but can be bought seperately: Steppe..
€12.50
Ex Tax:€10.33
Model: 42BYGH47-401A
A powerful 4-pin bipolar stepper motor suitable for various applications including 3D printers...
€11.50
Ex Tax:€9.50
Model: JK42HM60-1684A-03F
A special 4 pin bipolar stepper motor suitable for various applications. Unlike most stepper motors, this model has 400 steps in 1 revolution instead of the standard 200 steps. The motor has a standard JST-PH compatible connector which makes it easy ..
€18.00
Ex Tax:€14.88
Model: JK57HS76-2804-76A
A powerful 4-pin bipolar stepper motor suitable for various applications including 3D printers...
€23.50
Ex Tax:€19.42
Model: NEMA17-JSTPH013NM
A powerful 4 pin bipolar stepper motor suitable for various applications including 3D printers. The motor has a standard JST-PH compatible connector, making it easy to connect. The corresponding cable is not supplied (will be sold separately). This ..
€8.50
Ex Tax:€7.02
Model: JK42HS25-0404A-06F
A 4 pin bipolar stepper motor suitable for various applications including 3D printers. This model is a thin "Pancake" stepper motor with a thickness of 26 mm. The motor has a standard JST-PH compatible connector which makes it easy to connect. The co..
€11.00
Ex Tax:€9.09
Model: JK42HS40-1704AB-84F
A special 4 pin bipolar stepper motor suitable for various applications. This model has a shaft that protrudes from both the front and the back of the motor. The motor has a standard JST-PH compatible connector which makes it easy to connect. The cor..
€12.00
Ex Tax:€9.92
Model: STPMTREXPBOARD
An individual stepper motor extension board where a stepper motor driver can be installed. Specifications: Input voltage (power supply): max. 30V DC MS1, MS2 en MS3 control jumpers Control: Direction, speed, enable Motor connector: JST..
€3.50
Ex Tax:€2.89
Steppermotor with ULN2003 Motor Controller
Discontinued
Model: STEPULN2003
A 5 pin unipolar stepper motor including a ULN2003 (transistor array) motor controller. The motor uses a gear transmission to deliver more power (and less speed). If you want to use it directly, follow one of these tutorials: BYJ48 Stepper Motor o..
€4.00
Ex Tax:€3.31
Model: EE40101S2-999-A
Sunon fan with loose wires to cool your project. For more information see the datasheet under the "Downloads" tab...
€3.00
Ex Tax:€2.48
Model: MF40202V2-A99
Sunon fan with loose wires to cool your project. For more information see the datasheet under the tab "Downloads"...
€5.50
Ex Tax:€4.55
Model: MF50152V2-A99
Sunon fan with loose wires to cool your project. For more information see the datasheet under the tab "Downloads"...
€4.50
Ex Tax:€3.72
Model: MF60101V3-A99
Sunon fan with loose wires to cool your project. This size is also very suitable as a radiator fan for Type 22 and/or Type 33 radiators...
€4.00
Ex Tax:€3.31
Sunon Fan 60x60x10mm - 12V - with Speed Feedback
2-4 Weeks
Model: MF60101V2-G99
Sunon fan with loose wires to cool your project. This size is also very suitable as a radiator fan for Type 22 and/or Type 33 radiators. In addition, this fan also has a speed feedback (yellow wire). This gives a pulsed signal when the fan rotates, w..
€5.50
Ex Tax:€4.55
Model: EE80251S3-999
Sunon fan with loose wires to cool your project. For more information see the datasheet under the tab "Downloads"...
€4.00
Ex Tax:€3.31
Model: HA60251V4-A99
Sunon fan with loose wires to cool your project. This size is also very suitable as a radiator fan for Type 22 and/or Type 33 radiators...
€3.50
Ex Tax:€2.89
Model: MF80252V3-A99-A
Sunon fan with loose wires to cool your project. For more information see the datasheet under the tab "Downloads"...
€6.50
Ex Tax:€5.37
Model: TB6600
Easy to set stepper motor control for a bipolar stepper motor .  Specifications: Voltage range (signals): 3.3-24V Voltage range (power supply): 9-42V (12-24V recommended) Maximum current per bridge (adjustable via dipswitch): 0.5A, ..
€9.75
Ex Tax:€8.06
TB6612FNG Easy Motor Driver
2-4 Weeks
Model: TB6612FNG
A breakout board of a 1A Dual motor driver that is very easy to use. The pin headers are included. This can be soldered yourself if necessary. Read more about it here. Note: This is not an original product of sparkfun, but it functions in such a w..
€4.75
Ex Tax:€3.93
Model: TB67S109DRIVERMOD
This stepper motor driver module can be used separately or in combination with a CNC shield. The motor driver is suitable for motors that require higher currents, such as a Nema 23 stepper motor.  Specifications: Voltage range: 10-47V ..
€8.00
Ex Tax:€6.61
Model: TD-7115MG
A powerful servo that is easy to control. This servo has a double axis (one side of which does not rotate), which allows you to create a relatively sturdy pivot point using the supplied plastic wheels. In addition, the servo is waterproof...
€9.75
Ex Tax:€8.06
TD-7120MG Waterproof Digital Servo - 20kg - Dual Axis
2-4 Weeks
Model: TD-7120MG
A powerful servo that is easy to control. This servo has a double axis (one side of which does not rotate), which allows you to create a relatively sturdy pivot point using the supplied plastic wheels. In addition, the servo is waterproof. Note: T..
€10.25
Ex Tax:€8.47
Model: TD-7125MG
A very powerful servo that is easy to control. This servo has a double axis (one side of which does not rotate), which allows you to create a relatively sturdy pivot point using the supplied plastic wheels. In addition, the servo is waterproof...
€11.00
Ex Tax:€9.09
Model: TD-7130MG
A very powerful servo that is easy to control. This servo has a double axis (one side of which does not rotate), which allows you to create a relatively sturdy pivot point using the supplied plastic wheels. In addition, the servo is waterproof. No..
€12.00
Ex Tax:€9.92
TD-7135MG Waterproof Digital Servo - 35kg - Dual Axis
2-4 Weeks
Model: TD-7135MG
A very powerful servo that is easy to control. This servo has a double axis (one side of which does not rotate), which allows you to create a relatively sturdy pivot point using the supplied plastic wheels. In addition, the servo is waterproof. No..
€13.00
Ex Tax:€10.74
Model: TD-8120MG
A very powerful servo that is easy to control. It comes with a few pieces of plastic that you can mount on it, to which you can then mount other things. This servo is splashproof. Note: This servo can draw relatively high currents, especially with..
€10.25
Ex Tax:€8.47
Model: TD-8120MG-CONT
A very powerful digital continuous rotation servo that is easy to control. It comes with a few pieces of plastic that you can mount on it, to which you can then mount other things. This servo is splashproof. Note: This servo can draw relatively hi..
€11.00
Ex Tax:€9.09
Model: TD-8125MG
A very powerful servo that is easy to control. It comes with a few pieces of plastic that you can mount on it, to which you can then mount other things. This servo is splashproof. Note: This servo can draw relatively high currents, especially with..
€11.00
Ex Tax:€9.09
Model: TD-8125MG-CONT
A very powerful servo that is easy to control. It comes with a few pieces of plastic that you can mount on it, to which you can then mount other things. This servo is splashproof. Note: This servo can draw relatively high currents, especially with..
€11.00
Ex Tax:€9.09
Model: TD-8130MG
A very powerful servo that is easy to control. It comes with a few pieces of plastic that you can mount on it, to which you can then mount other things. This servo is splashproof. Note: This servo can draw relatively high currents, especially with..
€14.00
Ex Tax:€11.57
Model: TD-8130MG-CONT
A very powerful servo that is easy to control. It comes with a few pieces of plastic that you can mount on it, to which you can then mount other things. This servo is splashproof. Note: This servo can draw relatively high currents, especially with..
€14.00
Ex Tax:€11.57
Model: TD-8820MG
A very powerful servo that is easy to control. There are a number of pieces of plastic that you can mount on, to which you can then mount other things. The first few gears are so-called helical gears, where the teeth are angled to each other, which p..
€10.50
Ex Tax:€8.68
Model: TD-8825MG
A very powerful servo that is easy to control. There are a number of pieces of plastic that you can mount on, to which you can then mount other things. The first few gears are so-called helical gears, where the teeth are angled to each other, which p..
€11.50
Ex Tax:€9.50
Model: TD-8830MG
A very powerful servo that is easy to control. There are a number of pieces of plastic that you can mount on, to which you can then mount other things. The first few gears are so-called helical gears, where the teeth are angled to each other, which p..
€14.50
Ex Tax:€11.98
Model: TD-8835MG
A very powerful servo that is easy to control. There are a number of pieces of plastic that you can mount on, to which you can then mount other things. The first few gears are so-called helical gears, where the teeth are angled to each other, which p..
€15.50
Ex Tax:€12.81
Model: TD-9412MG
A powerful servo that is easy to control. It comes with a few pieces of plastic that you can mount on it, to which you can then mount other things. This servo is completely made of metal on the outside and is also waterproof...
€11.00
Ex Tax:€9.09
TinkerKit Braccio - Robotic Arm
On request
Model: T050000
The TinkerKit Braccio is a fully operational robotic arm, controlled via Arduino. It can be assembled in a variety of ways for multiple tasks such as picking up objects. It is also possible to attach a camera or solar panel to the arm. The Braccio ro..
€280.00
Ex Tax:€231.41
Showing 301 to 350 of 394 (8 Pages)
1
false
true
true
Remove
Change
tr